The M4A3(76)W HVSS (M4A3E8) variant of the M4 Sherman tank embodied improvements made throughout production in light of experience.

v t e History of the tank
Era	World War I Interwar World War II Cold War Post–Cold War
Country	Australia United Kingdom Cuba China Canada New Zealand Czechoslovakia France Germany Iran Iraq Italy Israel Japan Poland North Korea South Korea Soviet Union Spain Sweden United States Ukraine
Type	Light tank Medium tank Heavy tank Super-heavy tank Cruiser tank Flame tank Infantry tank Main battle tank Tank destroyer Tankette Assault gun Self-propelled anti-aircraft weapon Self-propelled artillery Self-propelled mortar Multiple rocket launcher

The United States has produced tanks since their inception in World War I, up until the present day. While there were several American experiments in tank design, the first American tanks to see service were copies of French light tanks and a joint heavy tank design with the United Kingdom.

In the interwar period there was reduced development due to the low expenditure on war material following the US non-interventionist policy and the financial position.

In World War II, the US came to the fore with tanks designed for mass production and reliability reflecting the US position as the "arsenal of democracy".

The U.S. has been greatly influential in the design philosophy, production and doctrine of tanks, and has been responsible for some of the most successful tank designs.^{[citation needed]}

World War I

The U.S. entered the First World War on the side of the Entente Powers in April 1917, without any tanks of its own. The following month, in light of a report into British and French theories on tank operation, the American Expeditionary Forces' commander-in-chief, General John Pershing, decided that both light and heavy tanks were essential for the conduct of the war and should be acquired as soon as possible.^[1] A joint Anglo-French-American program was launched to develop a new heavy tank based on British heavy tank designs, though it was expected that sufficient quantities of tanks would not be available until April 1918. The Inter-Allied Tank Commission decided that, because of the wartime demands on French industry, the quickest way to supply the American forces with tanks was to manufacture the French Renault FT light tank in the United States. Some heavy tanks would also be supplied by the British.

Captain Dwight Eisenhower had gone to Camp Meade, Maryland, in February 1918 with the 65th Engineer Regiment, which had been activated to provide the organizational basis for the creation of the Army's first heavy tank battalion. In March, the 1st Battalion, Heavy Tank Service (as it was then known) was ordered to prepare for movement overseas, and Eisenhower went to New York with the advance party to work out the details of embarkation and shipment with port authorities. The battalion shipped out on the night of 26 March, however Eisenhower did not join them. He had performed well as an administrator, and upon his return to Camp Meade, he was told he would be staying in the United States, where his talent for logistics would be put to use in establishing the Army's primary tank training center at Camp Colt in Gettysburg, Pennsylvania. Eisenhower became the #3 leader of the new tank corps and rose to the temporary rank of lieutenant colonel in the National Army and trained tank crews at "Camp Colt"–his first command–on the grounds of "Pickett's Charge" on the American Civil War battle site. The American Army in France had Captain George S. Patton as the first officer assigned to train the crews. While tanks like the Mark V and FT were being shipped over from France and Britain for training, Eisenhower trained his units with trucks that had bolted down machine guns. Once the tanks arrived Eisenhower had to learn how to operate one first before letting his men use it.^{[citation needed]}

The Six Ton Tank M1917 was the U.S.'s first mass-produced tank,^[2] a license-built near-copy of the French Renault FT.^[2] The U.S. Army ordered approximately 4,440 M1917s between 1918 and 1919, receiving about 950 before canceling the contract. The initial requirement of 1,200 was decided upon then later increased to 4,400, and some sample Renault tanks, plans, and various parts were sent to the US for study. The design was to be carried out by the Ordnance Department, under the job title "Six-ton Special Tractor", and orders for the vehicles placed with private manufacturers. However, the project was beset by problems: the French specifications were in metric, and thus incompatible with American machinery; coordination between military departments, suppliers, and manufacturers was poor; bureaucratic inertia, lack of cooperation from military departments, and possible vested interests all delayed progress.^{[citation needed]}

The Army in France was expecting the first 300 M1917s by April 1918, but by June, production had yet to begin, which forced the US to acquire 144 Renault FTs from the French. Production of the M1917 did not begin until the autumn, and the first completed vehicles emerged in October. Two arrived in France on 20 November, nine days after the armistice with Germany, and a further eight in December.^{[citation needed]}

The Ford 3-Ton M1918 was one of the first light tank designs by the U.S. It was a small two-man, one-gun tank, armed with an .30 M1919 Browning machine gun and capable of a maximum speed of 8 mph (13 km/h). Design on the 3-ton tank started in mid-1918. The 3-Ton was a two-man tank designed so that American forces could use another tank besides the Renault FT. Its twin Model T Ford engines were controlled by the driver (seated at the front), while the gunner sat beside him and controlled a .30-06 machine gun (either the M1917 Marlin or M1919 Browning) on a limited-traverse mount.

A contract for 15,000 of these vehicles was awarded; however, the U.S. Tank Corps felt that the design did not meet their requirements. The contract for the 15,000 tanks was ended after the Armistice, when only fifteen had been produced.^{[citation needed]}

Post-World War I

After the end of the conflict, the U.S. Army was reorganized. In 1919, Pershing recommended to a joint session of the Senate and House Committee on Military Affairs that the tank be subordinated to the infantry.^[3] ^[4] As a result, the 1920 National Defense Act disbanded the U.S. Tank Corps, and reassigned its tanks to the infantry branch, with only two heavy tank battalions and four light tank battalions escaping post-war demobilization.^[4]^[5]

The M1917 tanks came too late, and did not take part in any combat during the war. Afterwards, however, five accompanied the U.S. Marine Expeditionary Force to Tianjin in April 1927 under General Smedley Butler. They returned to the U.S. in late 1928.^[6] After the Tank Corps was abolished as a separate branch, and control of tanks handed to the infantry, the number of tank units was progressively reduced, and the vehicles mothballed or scrapped.

The Tank Mark VIII (or "Liberty", after its engine) was an Anglo-American tank design of the First World War, a collaborative effort to equip France, the U.K., and the U.S. with a single heavy tank design built in France for an offensive in 1919. Testing of the design was not finished until after the war, and it was decided to build 100 vehicles in the U.S.; these were constructed in 1919 and 1920. The American Liberty tanks equipped a single unit: the 67th Infantry (Tank) Regiment, based in Aberdeen, Maryland. The curious designation of the unit had its origin in the fact that since 1922 by law all tanks had to be part of the Infantry. Some Liberty tanks were assigned to the 301st Tank Battalion (Heavy), later redesignated the 17th Tank Battalion (Heavy). Throughout most of 1921 and 1922, Major Dwight D. Eisenhower commanded this unit.

Although the tank of World War I was slow, clumsy, difficult to control, and mechanically unreliable, its value as a weapon had been clearly demonstrated. In addition to the light and heavy categories of American-produced tanks of World War I, a third classification, the medium, began receiving attention in 1919. The meaning of the terms light, medium, and heavy tanks changed between the wars. During World War I and immediately thereafter, the light tank was considered to be up to 10 tons, the medium (produced by the British) was roughly between 10 and 25 tons, and the heavy was over 25 tons. Later, during World War II, increased weights resulted in light tank designs often weighing over 20 tons, medium tank designs weighing over 30 tons, and heavy tank designs weighing over 60 tons.

Patton and Eisenhower remained involved in developing the armored arm, which found a temporary home at Camp Meade under Rockenbach's command. In particular, the two men formulated theory and doctrine for the use of tanks in mass formations to achieve breakthroughs and carry out flanking attacks. They were met with vigorous opposition to their ideas from senior army officers, who favored the use of armor to support the infantry, not as a separate arm conducting independent operations. Congress took this view as well, when enacting the 1920 legislation that dissolved the Tank Corps as a separate entity.

The National Defense Act of 1920 placed the Tank Corps under the Infantry. Patton had argued for an independent Tank Corps, and understood that tanks operating with Cavalry would stress mobility, while tanks tied to the Infantry would emphasize firepower. However, the supply of slow World War I tanks and the subordination of tanks to the infantry branch impeded the development of any role other than direct infantry support, so the United States moved slowly in the development of armored and mechanized forces, which resulted in a significant cut in funding for tank research and development. Patton, convinced there was no future in tanks, applied and received a transfer to the cavalry in September 1920. Eisenhower got out two years later, in January 1922, when he was assigned to the staff of an infantry brigade in Panama.

The U.S. War Department considered that two types of tanks, the light and the medium, should fulfill all missions. The light tank was to be transportable by truck, and not exceed 5 tons gross weight. The medium tank was not to exceed 15 tons, so as to bring it within the weight capacity of railroad flatcars. Although an experimental 15-ton tank, the M1924, reached the mock-up stage, this and other attempts to satisfy the War Department and infantry specifications proved to be unsatisfactory. In reality, it was simply impossible to build a 15-ton vehicle meeting both War Department and infantry requirements.

In 1926, the General Staff reluctantly consented to the development of a 23-ton tank, although it made clear that efforts were to continue toward the production of a satisfactory 15-ton vehicle. The infantry were in agreement that a light tank, transportable by truck, best met their requirements. The net effect of the infantry's preoccupation with light tanks, and the limited funds available for tank development in general, was to slow the development of heavier vehicles and, ultimately, to contribute to the serious shortage of medium tanks at the outbreak of World War II.

The real beginning of the Armored Force was in 1928, twelve years before it was officially established, when Secretary of War Dwight F. Davis directed that a tank force be developed in the Army, after observing the maneuvers by the British Experimental Armoured Force. Davis' 1928 directive for the development of a tank force resulted in the assembly and encampment of an experimental mechanized force at Camp Meade, Maryland, from 1 July to 20 September 1928. The combined arms team consisted of elements furnished by Infantry (including tanks), Cavalry, Field Artillery, the Air Corps, Engineer Corps, Ordnance Department, Chemical Warfare Service, and Medical Corps. An effort to continue the experiment in 1929 was defeated by insufficient funds and obsolete equipment, but the 1928 exercise did bear fruit, as the War Department Mechanization Board, appointed to study results of the experiment, recommended the permanent establishment of a mechanized force.

Despite inadequate funding, the Ordnance Department managed to develop several experimental light and medium tanks, and also worked with auto engineer J. Walter Christie to test a Christie design model by 1929. None of these tanks were accepted, usually because each of them exceeded standards set by other Army branches. Patton later worked closely with Christie to improve the silhouette, suspension, power, and armament of the tanks. Christie's ideas had a great impact upon tank tactics and unit organization in many countries and, finally, upon the U.S. Army as well.

On 21 November 1930, Douglas MacArthur had been made chief of staff, with the rank of general.^[7] As chief of staff from 1930 to 1935, MacArthur wanted to advance motorization and mechanization throughout the Army. In late 1931 all arms and services were directed to adopt mechanization and motorization, and were permitted to conduct research and experiment as necessary. The Cavalry was given the task of developing combat vehicles that would enhance its role of reconnaissance, counter-reconnaissance, flank action, and pursuit.

With the law passed, tanks belonged to the infantry branch, so the cavalry gradually bought a group of combat cars, lightly armored and armed tanks that were often indistinguishable from the newer infantry "tanks". In 1933, MacArthur set the stage for the complete mechanization of the cavalry, declaring "The horse has no higher degree of mobility today than he had a thousand years ago. The time has therefore arrived when the Cavalry arm must either replace or assist the horse as a means of transportation, or else pass into the limbo of discarded military formations."^[8]

In November 1936, the U.S. Army's cavalry branch decided to modernize and needed a fully armored vehicle, capable of keeping up with the cavalry and of fulfilling regular combat duties. It came up with the T7 Combat Car, designed and built at the Rock Island Arsenal between 1937 and 1938, which was based on the M1 Combat Car but with an extended chassis and a convertible suspension - the ability to travel using wheels or tracks. The only prototype T7 Combat Car (No. W40223) was shipped to Aberdeen Proving Grounds in August 1938 for testing. While it showed good speed and performance, cavalry branch representatives were not impressed. Tests were delayed until 1939, but they were reasonably successful. The vehicle even participated in the First Army maneuvers at Plattsburgh, New York, in 1939, where the cavalrymen liked it. However, in October 1939, the cavalry branch formed new requirements for their combat vehicles which specified regular tracked (not combined) suspension. The reason for that decision was that the tracks were already available in reasonable quantity and quality and thus there was no need for the complexity and higher cost associated with convertible vehicles.[2] Furthermore, the heavy M2 Browning machine gun it was equipped with was determined insufficient for the role. The ongoing war in Europe at the time proved that, in order for a vehicle to be successful, it needed a proper cannon. In October 1939, despite its potential, the Mechanized Cavalry Board recommended further development and test of the T7 Combat Car program, and all other such convertible vehicles, be canceled, marking the end of wheel-tracked combat vehicle development for the U.S. Army.

Interwar

M1 Combat Car and M2 Light Tank

The M1 Combat Car was a tankette that entered use with the U.S. Cavalry in the late 1930s.^[9] Under the terms of the Defense Act of 1920, tanks were restricted to infantry units, which were equipped with M1 tanks armed with twin machine gun turrets by 1935. To allow U.S. Army cavalry units to be equipped with armored fighting vehicles, the tanks developed for the cavalry were designated "combat cars". The Cavalry branch opted for a single, larger turret to be mounted on their M1s. Other upgrades included improved suspension, improved transmission, and better engine cooling. The Combat Car designation was dropped in 1940, and the vehicle was renamed as the light tank M1A2.^[10]

The next tank to be designed, the M2 Light Tank, was developed in 1935 by Rock Island Arsenal for the infantry branch of the U.S. Army. The design originated from the earlier T1 and 1929 T2 Medium Tank designs,^[11] and drew limited inspiration from the British Vickers 6-ton. Its main weapon was one .50 BMG M2 Browning machine gun, and one .30-06 M1919 Browning machine gun, both installed in a small, one-man turret. After only 10 units were delivered, the Infantry branch decided to switch to a twin turret configuration, with the M1919 moved to a second turret. These early twin-turret tanks were nicknamed "Mae West" by the troops, after the popular movie star. The twin-turret layout was inefficient, but was a common feature of 1930s light tanks derived from the Vickers, such as the Soviet T-26 and Polish 7TP.

An improved version of the M2 Light Tank, the M2A4, armed with a high-velocity 37 mm gun M3 and coaxial machine gun in a single turret, served with the Marines' 1st Tank Battalion on Guadalcanal in 1942–43. The M2A4 was the only model of the M2 line to see combat. The Rock Island Arsenal also started work on a new medium tank, based on the design of the M2 Light Tank. Initially designated the T5, the redesigned model (with a 350 hp R-975 radial engine) was redesignated as the M2 Medium Tank in June 1939. ^[12]

T1 Light Tank and T2 Medium Tank

The T1 Light Tank and T2 Medium Tank were prototypes that were designed in the 1920s but soon became obsolete, although they would help development with later tanks.

Marmon Herrington light tanks

The Marmon-Herrington Combat Tank Light was a US light tank produced for the export market at the start of the Second World War. The CTL-3 had a crew of two and was armed with three M1919 Browning machine guns.^[13]

A few saw combat in the Dutch East Indies campaign against the Japanese invasion.^[14]^[15]

Marmon-Herrington CTLS in Surabaya, 1945.

In mid-1942 a batch was diverted to Australia from the Dutch order where they were used for training^[16]

After the attack on Pearl Harbor, some of these tanks were taken over by the United States Army and employed in Northern Alaska as the T14 and T16 respectively.^[17] There were also sent to Chinese Nationalist forces fighting the Japanese as more than 600 of the T16 CTMS tanks were delivered to China under Lend-Lease after Pearl Harbor.

M2 Medium tank

An M2A1 medium tank (late production series).

The M2 Medium Tank was a larger development of the M2 Light Tank and was first produced in 1939 by the Rock Island Arsenal, just prior to the war in Europe.^[18] Many components were common or used a similar design to the Light M2, including the vertical volute spring suspension which would be used in later tanks as well. Twin-wheeled bogies were mounted externally, and rubber-bushed and rubber-shoed track proved durable on roads. The initial M2 model was powered by an air-cooled Wright R-975 radial engine. For the M2A1, this engine was supercharged to provide an extra 50 hp (37 kW) for a total of 400 horsepower (300 kW), and designated as the R-975 C1 radial engine.^[19]^[20] The M2 Medium Tank's unique features included a total of 7 M1919 Browning machine guns, whereas most tanks only had 1 or 2, bullet deflector plates, and sloped armor on the hull front (glacis plate). The main armament was a 37 mm gun, with 32 mm armor; the M2A1 had a 51 mm gun mantlet. The features of the M2 series development, both good and bad, provided many lessons for U.S. tank designers that were later applied with great success in the M3 Lee, M4 Sherman and many other armored fighting vehicles.

Production for the M2 Medium Tanks was 18 M2 tanks, and 94 M2A1 tanks, for a total of 112. For combat it was a poor design, with thin armor, inadequate main armament and a high-profile. The four sponson-mounted machine guns proved to be completely unnecessary. But it provided important lessons that were used for the later M3 and M4 medium tanks. In particular, the M2's sloped frontal hull armor (glacis plate) was extremely advanced for a 1939 design, and would become a permanent feature of U.S. tank design. Events in Western Europe and on the Eastern Front rapidly demonstrated that the M2 was obsolete, and it was never used overseas in combat; it was used for training purposes throughout the war.

Chrysler opened a new tank plant, the Detroit Arsenal Tank Plant, to manufacture the M2, and the US Government contracted in August 1940 for 1,000 vehicles to be produced.^[12] As events in Europe made obvious that the M2 was obsolete, the government modified the contract before production began. Instead of M2 medium tanks, the plant would now build 1,000 M3 Grant tanks. Production of the M2 was returned to the Rock Island Arsenal, where 94 M2A1s were eventually built.^[19]^[21] The M2A1 had slightly better armor and a slightly larger turret than the original M2, since it had the turret from the M3 Light Tank, with gun mantlet armor 2 inches (51 mm) thick.^[19]

World War II

Light tanks

M3 Light Tank and M5 Light Tank

M3 Stuart at Fort Knox, Kentucky, used for training.

The M3 Light Tank was an upgrade of the M2 Light Tank. The Battle of France gave momentum to the US tank program because U.S. observers saw how easily British and French light tanks were decimated by the advanced German Panzers, and in July 1940 work began on a new light tank based on the M2 series.

The initial upgrade was designated the M3 Light Tank, and it was given thicker armor, modified suspension and a 37 mm gun. Production of the M3 and later the M5 Stuart started in March 1941 and continued until October 1943 with a total of 25,000 produced.

An upgrade of the M3, which was initially called M4 but later redesignated the M5, was developed with improved engines and produced in 1942. The M5 featured a redesigned hull and driver's hatches moved to the top. There was the T7 light tank project with thicker armor, volute suspension and better gun. Changes requested in development took the weight of the T7 out of the "light tank" class and it was reclassified as a medium tank and accepted for production with a contract for 3,000. However the M4 was already in production and the M7 was canceled with only 7 completed.^[22] The M5 gradually replaced the M3 in production from 1942 and was in turn succeeded by the Light Tank M24 in 1944.

The British Army was the first to use the M3 in combat. In November 1941, some 170 Stuarts took part in Operation Crusader, with poor results.

Although the high losses suffered by Stuart-equipped units during the operation had more to do with better tactics and training of the enemy than superiority of enemy tanks in the North African campaign, the operation revealed that the M3 had several technical faults. Mentioned in the British complaints were the 37mm gun's limited range and poor internal layout. The two-man turret crew was a significant weakness, and some British units tried to fight with three-man turret crews. Crews liked the vehicle's high speed and mechanical reliability.

From the summer of 1942, when enough U.S. medium tanks had been received, the British usually kept Stuarts out of tank-to-tank combat. M3s, M3A3s, and M5s continued in British service until the end of the war, but British armor units had a smaller proportion of these light tanks than US units. The National Revolutionary Army also received the M3A3s tanks and some were later used in the fight against the Communist forces.

The other major Lend-Lease recipient of the M3, the Soviet Union, was even more dissatisfied with the tank, considering it undergunned, underarmored, likely to catch fire, and too sensitive to fuel quality. The narrow tracks were highly unsuited to operation in winter conditions, as they resulted in high ground pressures that sank the tank. However, the Stuart was superior to early-war Soviet light tanks such as the T-60, which were often underpowered and possessed even lighter armament than the Stuart. In 1943, the Red Army tried out the M5 and decided that the upgraded design wasn't much better than the M3. Being less desperate than in 1941, the Soviets turned down an American offer to supply the M5. M3s continued to see limited usage in the Red Army at least until 1944.

In US Army service, the M3 first saw combat in the Philippines. Two battalions, comprising the Provisional Tank Group fought in the Bataan peninsula campaign. In 1941, the US Army Chief of Staff, General George C. Marshall, directed that the army's new M3 Stuart light tanks, then just rolling off the assembly lines,^[23] were to have the highest priority in reinforcing General MacArthur's command in the Pacific. The activated Army National Guard 194th and 192nd Tank Battalions were each equipped with 54 of the newly manufactured M3 Stuart light tanks, along with 23 half-tracks per battalion.^[24] The federalized California Army Guard 194th Tank Battalion deployed from San Francisco on 8 September 1941, arriving in the Philippines on 26 September. That deployment was followed by the 192nd Tank Battalion, which had been training at Fort Knox, which reached Manila in November.^[24]

On 21 November 1941, the 192nd and 194th Tank Battalions were combined to form the Provisional Tank Group under the command of Colonel James R.N. Weaver.^[24] With the subsequent commencement of hostilities, and Japanese landings along the coastlines in December, the Provisional Tank Group was ordered to counterattack^[25] the landing forces, and to cover the allied retreat towards the Bataan Peninsula.^[24]

U.S. Army M3 Stuart tank at Fort Knox, Kentucky

On 22 December 1941, the 192nd Tank Battalion became the first American unit to engage enemy armor in tank-to-tank combat during World War II as they ran into tanks from the Imperial Japanese Army 4th Tank Regiment.^[24]^[25] The M3s of the 192nd Tank Battalion went up against the equally armed Type 95 Ha-Go light tank, which were armed with the 37mm cannon, but were equipped with diesel engines. The Type 95 had been at the forefront of tank technology when it was fielded in 1935.^[26] Both the 192nd and the 194th Tank Battalions continued to skirmish with the 4th Tank Regiment,^[27] as they retreated towards Bataan. During the remaining struggle for Bataan, the two Tank Battalions tried to defend the beaches, the airfield, and provide support for the infantry, until 8 April 1942, when the 192nd and 194th received orders to prepare to destroy their M3s. They were not entirely successful, as many of the M3 Stuarts were captured and used by the enemy during the war. When the Philippines were liberated in 1944/45, some of the captured M3 Stuart light tanks were taken back by US forces.^[28] The unit withdrew to the Bataan Peninsula as part of the general retreat, and ceased to exist on 9 April 1942 when the last surviving American and Philippine forces on the Bataan Peninsula surrendered.

When the American Army joined the North African Campaign in late 1942, Stuart units still formed a large part of its armor strength, until they were eventually replaced with M4 Shermans.

After the disastrous Battle of the Kasserine Pass, the US quickly disbanded most of their light tank battalions and subordinated the Stuarts to medium tank battalions, performing the traditional cavalry missions of scouting and screening. For the rest of the war, most US tank battalions had three companies of M4 Shermans and one company of M3s or M5/M5A1s.

In the European Theatre, Allied light tanks had to be given cavalry and infantry fire support roles since their main cannon armament could not compete with heavier enemy units. However, the Stuart was still effective in combat in the Pacific Theater, as Japanese tanks were both relatively rare and were generally much weaker than even Allied light tanks. Japanese infantrymen were poorly equipped with anti-tank weapons and tended to attack tanks using close-assault tactics. In this environment, the Stuart was only moderately more vulnerable than medium tanks. In addition, the poor terrain and roads common to the theater were unsuitable for the much heavier M4 medium tanks, and so initially, only light armor could be deployed. Heavier M4s were eventually brought to overcome heavily entrenched positions, though the Stuart continued to serve in a combat capacity until the end of the war.

The US liquidated its Stuarts when it got sufficient numbers of M24 Chaffees, but the tank remained in service until the end of the war and well after. In addition to the United States, United Kingdom and Soviet Union, who were the primary users, it was also used by France and China.

M22 Locust

The Light Tank (Airborne) M22, also known as the Locust, began development in late 1941 in response to a request by the British military earlier in the year for an airmobile light tank which could be transported onto a battlefield by glider.^[29] The United States Ordnance Department was asked to produce this tank, which in turn selected Marmon-Herrington to design and build a prototype airborne tank in May 1941. The prototype was designed so that it could be transported underneath a Douglas C-54 Skymaster transport aircraft, although it would also fit inside a General Aircraft Hamilcar glider.

A Locust tank, facing right, on a road that cuts through a field. Several uniformed men move in the opposite direction in the foreground. A large military glider can be seen in the background, just behind the Locust. — Locust in action during Operation Varsity, March 1945

After a series of modifications were made to the initial prototype, production began in April 1943. It was significantly delayed, however, when several faults were found with the tank's design. Marmon-Herrington only began to produce significant numbers of the T9 in late 1943 and early 1944, and by then the design was considered to be obsolete; only 830 were built by the time production ended in February 1945. As a result, the Ordnance Department gave the tank the specification number M22 but no American combat units were equipped with it.

However, during 1943, the War Office believed that the tank would perform adequately despite its faults that came to light, so the tank was given the title of 'Locust' and 260 were shipped to Great Britain under the Lend-Lease Act. Seventeen Locusts were received by the 6th Airborne Armoured Reconnaissance Regiment in late 1943. Eight were eventually used during the airborne Operation Varsity in March 1945. The tanks did not perform well in action and Locusts were never used in action again.

M24 Chaffee

In April 1943 the government started work on the M24 Chaffee, designated Light Tank T24 as a replacement for the M3/M5 Stuart after the original replacement, the M7, was rejected in March. Every effort was made to keep the weight of the vehicle under 20 tons. The armor was kept light, and a lightweight 75mm gun was developed. The design also featured wider tracks and torsion bar suspension. It had a relatively low silhouette and a three-man turret. In mid-October the first pilot vehicle was delivered and production began in 1944 under the designation "Light Tank M24". 4,730 were produced by the time production stopped in August 1945.

The first thirty four M24s reached Europe in November 1944 and were issued to the U.S. 2nd Cavalry Group (Mechanized) in France. These were then issued to F Company, 2nd Cavalry Reconnaissance Battalion and F Company, 42nd Cavalry Reconnaissance Battalion which each received seventeen M24s. During the Battle of the Bulge in December 1944, these units and their new tanks were rushed to the southern sector; two of the M24s were detached to serve with the 740th Tank Battalion of the U.S. First Army.

The M24 started to enter widespread issue in December 1944 but were slow in reaching the front-line combat units. By the end of the war, many armored divisions were still mainly equipped with the M5. Some armored divisions did not receive their first M24s until the war was over.

Reports were generally positive. Crews liked the improved offroad performance and reliability, but were most appreciative of the 75 mm main gun, which was a vast improvement over the 37 mm. The M24 was not up to the challenge of fighting tanks, but the bigger gun gave it a chance to defend itself when required. Regardless, its light armor still left it vulnerable.

The M24's service during World War II was insignificant, as too few arrived too late to replace the M5s of the armored divisions, but the M24 saw extensive use in the Korean War.

In the Korean War, M24s were the initial US tanks directed to combat the North Korean T-34-85s. The occupation troops in Japan from which the tanks were drawn were inexperienced and under-equipped due to rapid demobilization after World War II. The M24 fared poorly against these better armed, better armored, and better crewed medium tanks, losing most of their number while inflicting only minor damage on the T-34 units.

Medium and heavy tanks

M3 Lee

The Medium Tank M3 replaced the M2 Medium tank and design commenced in July 1940, and the first "Lees" were operational in late 1941.^[30] Many were sent to the British where the tank was called the "General Lee" (after Confederate General Robert E. Lee), or "General Grant" (after General Ulysses S. Grant) depending whether they had U.S. specification or British specification turrets respectively.

The U.S. Army needed a good tank and coupled with Great Britain's demand for 3,650 medium tanks immediately,^[31] the Lee began production by late 1940. The M3 was well armed and armored for the period, but due to design flaws (high silhouette, archaic sponson mounting of the main gun, below average offroad performance) it was not satisfactory and was withdrawn from front line duty as soon as the M4 Sherman became available in large numbers — the British managed to use the M3 successfully against the Imperial Japanese Army in Burma until 1945.^[32]

M2 75 mm gun as mounted in medium tank M3

When the U.S. entered the war, the M2 series medium tank design was obsolete with a 37 mm gun, 32 mm frontal armor, machine gun main armament and a very high silhouette. The success of the Wehrmacht in the French campaign, led by the Panzer III and Panzer IV, convinced the U.S. Army to immediately order a new medium tank armed with a 75 mm gun in a turret, which would ultimately become the M4 Sherman. However, until the Sherman was in production, an interim design with a 75 mm gun was urgently needed, and this is where the M3 came in.

The M3's design was somewhat unusual as the main weapon, a larger caliber, low-velocity 75 mm gun, was mounted in an offset sponson within the hull, giving the gun a limited traverse. A small turret with a lighter, high-velocity 37 mm gun sat on the tall hull. An even smaller cupola on top of the turret held a Browning M1919. The British ordered the M3 when they were refused permission to have their own tank designs (the Matilda infantry tank and Crusader cruiser tank) made by American factories. British experts had viewed the mock-up in 1940 and identified several flaws — the high profile, the hull mounted gun, radio in the hull, smooth tracks, the amount of armor with insufficient attention to splash-proofing the joints.^[33] The British agreed to order 1,250 M3s, to be modified to their requirements - the order was subsequently increased with the expectation that when a superior tank was available it could replace part of the order. Contracts were arranged with three U.S. companies, and the total cost was approximately US$240 million. This sum was all of the British funds in the US and it took the Lend-Lease Act to solve the financial problems.

The prototype was completed in March 1941 and production models followed with the first British specification tanks in July. The British cast turret included a bustle at the back for the Wireless Set No. 19 radio. It had thicker armour than the U.S. one and removed the U.S. cupola for a simple hatch. Both U.S. and British tanks had thicker armor than first planned.^[34] The British design required one fewer crew member than the US version due to the radio in the turret. The U.S. eventually eliminated the full-time radio operator, assigning the task to the driver. After extensive losses in Africa and Greece, the British realized that to meet their needs for tanks, both the Lee and the Grant types would need to be accepted.

The U.S. military utilized the "M" (Model) letter to designate nearly all of their equipment. When the British Army received their new M3 medium tanks from the US, confusion immediately set in,^[35] as the M3 medium tank and the M3 light tank were identically named. The British Army began naming^[18] their American tanks, although the U.S. Army never used those terms until after the war.^[18] The M3 tanks with the British turret and radio setup received the name "General Grant", while the original M3s were called "General Lee", or more usually just "Grant" and "Lee". The M3 brought much-needed firepower to British forces in the North African desert campaign.

The 75 mm was operated by a gunner and a loader. The 75 mm gun used an M1 periscope, with an integral telescope, which was mounted on top of the sponson for sighting. The periscope rotated with the gun. The sight was marked from zero to 3,000 yd (2,700 m)^[36] with vertical markings to aid deflection shooting at a moving target. The gunner laid the gun on target through geared handwheels for traverse and elevation.

The 37 mm was aimed through the M2 periscope, though this was mounted in the mantlet to the side of the gun. It also sighted the coaxial machine gun. Two range scales were provided: 0-1,500 yd (1,400 m) for the 37 mm and 0-1,000 yd (910 m) for the machine gun.

M3 tank crew at Souk el Arba, Tunisia, 23 November 1942

Of the 6,258 M3s produced by the U.S., 2,855 were supplied to the British Army, and about 1,368 to the Soviet Union.^[37] Consequently, one of the American M3 medium tank's first actions during the war was in 1942, during the North African Campaign.^[38] British Lees and Grants were in action against Rommel's forces at the disastrous Battle of Gazala on 27 May that year. They continued to serve in North Africa until the end of the campaign. A regiment of M3 Mediums was also used by the U.S. 1st Armored Division in North Africa. In the North African campaign, the M3 was generally appreciated for its mechanical reliability,^[39] good armor and heavy firepower.

In all three areas, it outclassed the available British tanks and was able to fight German tanks and towed anti-tank guns. The tall silhouette and low, hull-mounted 75 mm were severe tactical drawbacks, since they prevented the tank from fighting from hull-down firing positions. The use of riveted armor led to a problem called "spalling", whereby the impact of enemy shells would cause the rivets to break off and become projectiles inside the tank. Later models were welded to eliminate this problem. The M3 was replaced by the M4 Sherman as soon as these were available, though several M3s saw limited action in the battle for Normandy as armored recovery vehicles with dummy guns.

M4 Sherman

Main article: M4 Sherman

The first Sherman in U.S. service, the M4A1, entered combat first with the British in the North Africa Campaign. Here one of the 7th Army lands at Red Beach 2 on 10 July 1943, during the Allied invasion of Sicily.

The M4 was one of the best known and most used American tanks of World War II. Like the Lee and Grant, the British were responsible for the name, with this tank's namesake being Civil War General, William Tecumseh Sherman. The M4 Sherman was a medium tank that proved itself in the Allied operations of every theater of World War II. The Sherman was a relatively inexpensive, easy to maintain and produce combat system. Similar to production efforts on the part of the Soviet Union with their T-34 tank system, the M4 Sherman was the same class of mass-produced tank weapon.

The new design was put into action beginning on 31 August 1940. This medium tank would have to mount a 75 mm main gun armament into a fully-traversable turret. The new tank would also have to incorporate the engine, transmission, tracks and suspension systems of the M3 Lee medium tanks in an effort to ease production and save time. This new medium tank would also have to reduce the crew from six to five and feature improved armor allocation without increasing the vehicle's overall weight.

The design appeared as the T6 pilot model: it proved acceptable to U.S. Army officials and production was ordered for the new "M4" on 5 September 1941. Before production on the M4 ramped up, however, the M4 design was further revised to include a heavy-barrel .50 BMG M2 Browning on the turret for anti-aircraft defense. A .30-06 M1919 Browning was then added to the upper hull bow plate.

The Army had seven main sub-designations for M4 variants during production: M4, M4A1, M4A2, M4A3, M4A4, M4A5, and M4A6. These designations did not necessarily indicate linear improvement: A4 was not meant to indicate it was better than the A3. These sub-types indicated standardized production variations, which were in fact often manufactured concurrently at different locations. The sub-types differed mainly in engines, although the M4A1 differed from the M4 by its fully cast upper hull; the M4A4 had a longer engine system that required a longer hull, a longer suspension system, and more track blocks; M4A5 was an administrative placeholder for Canadian production; and the M4A6 had an elongated chassis, but fewer than 100 of these were produced.

One main problem for the Sherman design, in its various forms, was the heavier guns on the German tanks coming onto the battlefield in the latter half of the war, especially the Tiger and Panther tanks. The German Tiger I tank was armed with a powerful 88 mm gun (originally developed from the 88mm Flak Gun) that made it a very dangerous opponent for any Allied tank.

While most Shermans ran on gasoline, the M4A2 and M4A6 had diesel engines: the M4A2 with a pair of GMC 6-71 straight six-cylinder engines,^[40] the M4A6 a Caterpillar RD1820 radial.^[41] These, plus the M4A4, which used the Chrysler A57 multibank engine, were mostly supplied to Allied countries under Lend-Lease.^[42] "M4" can refer specifically to the initial sub-type with its Continental radial engine, or generically to the entire family of seven Sherman sub-types, depending on context.

Many details of production, shape, strength and performance improved throughout production, without a change to the tank's basic model number: more durable suspension units, safer "wet" (W) ammunition stowage, and stronger armor arrangements, such as the M4 Composite, which had a cast front hull section mated to a welded rear hull. British nomenclature differed from that employed by the U.S.^[a] The M4 Sherman was used by many of America's allies and continued to see service long after World War II.

A 24-volt electrical system was used in the M4.^[43]

Early Shermans mounted a 75 mm medium-velocity general-purpose gun. Although Ordnance began work on the Medium Tank T20 as a Sherman replacement, ultimately the Army decided to minimize production disruption by incorporating elements of other tank designs into the Sherman. Later M4A1, M4A2, and M4A3 models received the larger T23 turret with a high-velocity 76 mm M1 gun, which reduced the number of HE and smoke rounds carried and increased the number of anti-tank rounds.

Later, the M4 and M4A3 were factory-produced with a 105 mm howitzer and a new distinctive mantlet in the original turret. The first standard-production 76 mm gun Sherman was an M4A1, accepted in January 1944, and the first standard-production 105 mm howitzer Sherman was an M4 accepted in February 1944.

In June–July 1944, the Army accepted a limited run of 254 M4A3E2 Jumbo Shermans, which had very thick armor, and the 75 mm gun in a new, heavier T23-style turret, in order to assault fortifications at Normandy Beach. Some armor points exceeded 7 inches (17 cm) in effective thickness. Some were upgraded with the 76.2 mm gun. The M4A3 was the first to be factory-produced with the horizontal volute spring suspension (HVSS) with wider tracks to distribute weight; the smooth ride of the HVSS with its experimental E8 designation led to the nickname "Easy Eight", the vehicles were designated M4A3(76)W HVSS. Some E8s were equipped with the M101 howitzer.

Both the Americans and the British developed a wide array of special attachments for the Sherman; few saw combat, and most remained experimental. Those that saw action included the bulldozer blade for the Sherman dozer tanks, Duplex Drive (DD) for "swimming" Sherman tanks, R3 flamethrower for Zippo flame tanks, and both the T34 60-tube Calliope 4.5" rocket launcher and T40 Whizbang 7.2" rocket launcher for the Sherman turret. The British variants (DDs, Firefly, Tulips, and mine flails) were among "Hobart's Funnies" of the 79th Armoured Division. The British Sherman Firefly was the most successful of these, incorporating the Ordnance QF 17-pounder into the Sherman's chassis. It was effective, especially against the more powerful German tanks like the Tiger, and over 2,000 of them were produced.

M6 Heavy Tank

Front view of M6, with several early M3 light tanks in the background

The M6 heavy tank was a heavy tank built off of the similarly designed multi-turreted T1, armed with a 76.2 mm gun, a co-axial 37 mm gun, two .50 BMG M2 Browning and two .30-06 M1919 Browning machine guns, two in the hull and one on top of the turret. An order of 50 was placed and prototype vehicles saw trials but by the time it was ready for full-scale production the Army did not see any advantages over the M4 Sherman and planned production was cut from 5000 to 40. The M6 was declared obsolete in 1944 but was used in propaganda efforts.

T14 Heavy Tank

The T14 Heavy Tank was a joint US-British project to produce a well-armored tank that could equip both armies, armed either with the American 75 mm or British 57 mm 6-pounder gun. The British ordered over eight thousand in 1942 but by time the pilot was tested in 1944 they no longer had a need for it as the Churchill infantry tank had proven to be effective.

M26 Pershing

Main article: M26 Pershing

The M26 Pershing Heavy Tank came into service in 1945 under the designation of M26 Heavy Tank with the name "Pershing" named after General John J. Pershing, who commanded the U.S. Army during World War One. It was developed from the T20 Medium Tank which itself was an attempt at a faster equivalent to the T14. T26E3 pre-production tanks saw limited combat in Germany where it held its own with the German Tiger I and Panther tanks, which were much more powerful than the M4 Sherman that the Pershing was replacing. The tank was a large improvement over the M4.

The M26 Pershing Heavy Tank had heavier armor, a more powerful gun, and improved torsion bar suspension compared to the Sherman. The main armament of the M26 Pershing was its 90 mm gun. Secondary .30-06 machine guns were mounted co-axially in the turret and in the bow.^[b] A .50 BMG heavy machine gun was mounted on top of the turret.

One T26E1 had been fitted with an experimental longer version of the 90 mm gun mounted in the turret. It was shipped to Europe, where extra armor taken from a German tank was welded on. Nicknamed "Super Pershing" it was comparable to the German Tiger II in firepower and protection and was one of only two deployed to Europe during World War II.^[44] It saw combat in mid-1945.

A total of 2,222 M26 Pershing tanks were produced, beginning in November 1944, only 20 of which saw combat in Europe during World War II. The tank was reclassified as a medium tank in May 1946, and while it didn't have time to make any impact in the Second World War, it served with distinction in the Korean War alongside the M4A3E8 Sherman. In combat it was, unlike the M4 Sherman, fairly equal in firepower and protection to both the Tiger I and Panther tanks, but shared their main faults, underpowered and mechanically unreliable.

Tank destroyers and assault guns

Alongside tanks, the US Army employed tracked "tank destroyers" (self-propelled anti-tank guns) based on tank hulls with more powerful guns but giving up armor protection for the crew. These were designated "Gun Motor Carriage" and followed earlier half-track designs.

M10 GMC

The 3-inch Gun Motor Carriage M10 was a 3-inch gun in open-topped turret on a M4 Sherman-based chassis.

M18 Hellcat

The M18 Hellcat (officially designated the "76 mm Gun Motor Carriage M18" or M18 GMC for short) was used in the Italian, European, and Pacific Theaters, and in the Korean War. It was the fastest armored vehicle in the American defense inventory of the 20th century, until the turboshaft-powered M1 Abrams main battle tank appeared decades later.^[45] The speed was attained by keeping armor to a minimum, no more than one inch thick and roofless, open-top turrets (a standard design feature for all American fully tracked tank destroyers of World War II) and by powering the relatively small vehicle with a radial engine originally designed for aircraft usage.

M36 Jackson/GMC

Together with the M10 and M18, the 90 mm gun-armed M36 Gun Motor Carriage, provided American and Allied forces with a respectable mobile anti-tank capability against the newer German armored types.^[46] The M36 combined the hull of the M10 tank destroyer, which used the M4 Sherman's reliable chassis and drivetrain combined with sloped armor, and a new turret mounting the 90 mm gun M3. Conceived in 1943, the M36 first served in combat in Europe in October 1944, where it partially replaced the M10 tank destroyer. It also saw use in the Korean War, where it was able to defeat any of the Soviet tanks used in that conflict. Some were supplied to South Korea as part of the Military Assistance Program and served for years, as did re-engined examples found in Yugoslavia, which operated into the 1990s.

Howitzer Motor Carriage M8

The Howitzer Motor Carriage M8 aka the "Scott" was a self-propelled howitzer used for close support. It saw use on the western and Italian fronts, as well as in the Pacific. The turret had a 75mm howitzer and was mounted on an M5 Stuart hull. It also had an M2 Browning machine gun. It went 36 mph on roads, had 9.5–44 mm of armor, and had a crew of four. It was very effective against bunkers and other stationary enemy positions. It later saw use in the First Indochina War and the Algerian War. Some self-propelled artillery and self-propelled mortar vehicles were used in the direct fire role, but the M8 and the 105 mm howitzer-armed Sherman "Jumbo" were the only vehicles dedicated for the use.