This is a route-map template for a bus route in (({1))}.
- For a key to symbols see ((bus route legend)).
- For information on using this template, refer to Template:Routemap.
- For pictograms used, see Commons:BSicon/Catalogue.
This is a universal template for bus and trolleybus Route Diagram Templates (RDT). It adds the following text (without the surrounding box) to an RDT:
It will also place the template in Category:Bus routemap templates or the appropriate country-based subcategory.
Usage[edit]
Country is specified by any valid ISO 3166-1 code.
Additional codes[edit]
The template also recognizes these unofficial codes:
| Code | Location |
|---|---|
| AFR | Africa |
| AA or ASA | Asia |
| CT or CAT | Catalonia |
| EU or EUR | Europe |
| NIL | Northern Ireland |
| UK | United Kingdom |
Optional parameters[edit]
When included, the second (optional) parameter should be the parent article of the diagram.
((Bus-routemap|UK|Cambridgeshire Guided Busway))
will change the first line of the template to:
Including the optional named parameter |type= will change “a bus route in Country” to “a alternate text in Country”. For example,
((Bus-routemap|UK|type=[[guided bus]] system))
will change the first line of the template to:
and,
((Bus-routemap|UK|Cambridgeshire Guided Busway|type=[[guided bus]] system))
will change the first line of the template to:
The optional named parameter |the=anything will omit the word “the” before the linked page. For example,
((Bus-routemap|US|the=x|CMAX|type=[[bus rapid transit]] line))
will change the first line of the template to:
The optional named parameter |display= will replace the text of the article link. If display is set to either I or i the article link will automatically be italicized.
The optional named parameter |place= will change “a bus route in Country” to “a bus route in place, Country”. For example,
((Bus-routemap|US|J Line (Los Angeles Metro)|display=J Line |place=[[Los Angeles]]))
will change the first line of the template to:
Categories[edit]
By default the template will be included in the appropriate category for that country. However, adding the parameter |cat=no will exclude the template from all categories. Note that this parameter is not case sensitive: i.e. |cat=NO produces the same result as |cat=no.
Setting |cat=brt will include the template in Category:Bus rapid transit routemap templates and change the first line of the template to:
The optional named parameter |catidx= will add a sort key to the category.
See also[edit]
- General
- ((Railway-routemap))
- ((Bus-routemap))
- ((Road-routemap))
- ((Trail-routemap))
- ((Waterway-routemap))
- Specific
- ((UK-railway-routemap)) United Kingdom
- ((UK-waterway-routemap)) United Kingdom rivers and canals
- ((US-railway-routemap)) United States
- ((NYCS-routemap)) New York City Subway