 | This template is used on approximately 14,000 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them. |
Usage
This box can be used as a complete section inside the ((chembox)). Copy the left column into an existing Chembox.
| Section2=((Chembox Properties
| Properties_ref =
| Formula =
| Formula_ref =
| Formula_Comment =
| C= | H= | N= <!--(etc)-->
| Formula_Charge =
| MolarMass =
| MolarMassRound =
| MolarMass_ref =
| MolarMass_notes =
| Appearance =
| Odor = | Odour =
| Density =
| MeltingPt =
| MeltingPtC =
| MeltingPtF =
| MeltingPtK =
| MeltingPt_ref =
| MeltingPt_notes =
| BoilingPt =
| BoilingPtC =
| BoilingPtF =
| BoilingPtK =
| BoilingPt_ref =
| BoilingPt_notes =
| CriticalTP =
| SublimationConditions =
| Solubility =
| SolubilityProduct =
| SolubilityProductAs =
| SolubleOther =
| Solvent =
| Solubility1 =
| Solvent1 =
| Solubility2 =
| Solvent2 =
| Solubility3 =
| Solvent3 =
| Solubility4 =
| Solvent4 =
| Solubility5 =
| Solvent5 =
| Solubility6 =
| Solvent6 =
| CMC =
| HLB =
| LogP =
| VaporPressure =
| HenryConstant =
| AtmosphericOHRateConstant =
| pKa =
| pKb =
| ConjugateAcid =
| ConjugateBase =
| IsoelectricPt =
| ElectricalResistivity =
| LambdaMax =
| Absorbance =
| BandGap =
| ElectronMobility =
| SpecRotation =
| MagSus =
| ThermalConductivity =
| RefractIndex =
| Viscosity =
| CriticalRelativeHumidity =
| Dipole =
| OrbitalHybridisation =
| SpecificSurfaceArea =
| PoreVolume =
| AveragePoreSize =
))
|
((Chembox Properties)) - incomplete list Reference Chemical formula reference comment per element (alternative input) molecule charge MolarMass MolarMassRound MolarMass_ref MolarMass_notes Appearance Odor, Odour Density MeltingPt, any text Number, in Celsius. Is converted to F and K Also possible: MeltingPtF=, or MeltingPtK= BoilingPt, any text Number, in Celsius. Is converted to F and K Also possible: BoilingPtF=, or BoilingPtK= Critical temperature and pressure SublimationConditions Solubility in water (Aqueous solution) SolubilityProduct SolubilityProductAs SolubleOther Solvent Solubility1 [[(({Solvent1))}]] Solubility2 [[(({Solvent2))}]] Solubility3 [[(({Solvent3))}]] Solubility4 [[(({Solvent4))}]] Solubility5 [[(({Solvent5))}]] Solubility6 [[(({Solvent6))}]] Critical micelle concentration (units must be manually inserted) Hydrophilic-lipophilic balance (units must be manually inserted) LogP VaporPressure HenryConstant AtmosphericOHRateConstant pKa pKb Conjugate acid Conjugate base IsoelectricPt ElectricalResistivity LambdaMax Absorbance BandGap ElectronMobility SpecRotation MagSus ThermalConductivity RefractIndex Viscosity CriticalRelativeHumidity Dipole OrbitalHybridisation SpecificSurfaceArea PoreVolume AveragePoreSize |
Chemical formula
Chemical formula by element:
| C= | H= | N= | O= (etc., 118 elements)
| Formula_Charge=
| Formula_ref=
| Formula_Comment
OR hardcoded (formula input will show unedited)
| Formula=
| Formula_ref=
| Formula_Comment=
Temperatures
Temperatures for both for the melting point and boiling point can be entered in multiple ways. |MeltingPt= and |BoilingPt= allow any textual input. E.g.:
|MeltingPt=Unknownshows: Unknown
When supplying a temperature value (the numerical value in either °C, °F or K), the infobox will calculate and present all three temperatures. Only one of the three _C, _F, _K values may be entered. E.g.:
|MeltingPtC=100shows: 100 °C; 212 °F; 373 K
To show a temperature range, simply add the corresponding _CH high value (_FH, _KH). E.g.:
|MeltingPtF=50|MeltingPtFH=75shows 10 or 24 °C; 50 or 75 °F; 283 or 297 K
All available temperature parameters:
| MeltingPt
| MeltingPtC
| MeltingPtF
| MeltingPtK
| MeltingPt_ref
| MeltingPt_notes
| BoilingPt
| BoilingPtC
| BoilingPtF
| BoilingPtK
| BoilingPt_ref
| BoilingPt_notes
|
|
Example
- Ammonia (and some exemplary additions)
| Properties | |
|---|---|
| NH3 | |
| Molar mass | 17.031 g·mol−1 |
| Appearance | Colourless gas |
| Odor | Strong pungent odor |
| Density | 0.86 kg·m−3 (1.013 bar at boiling point) 0.73 kg·m−3 (1.013 bar at 15 °C) 681.9 kg·m−3 at −33.3 °C (liquid) |
| Melting point | −77.73 °C (−107.91 °F; 195.42 K) |
| Boiling point | −33.34 °C (−28.01 °F; 239.81 K) |
| |
| Solubility | Soluble in chloroform, ether, ethanol, methanol |
| log P | logP |
| Vapor pressure | 8573 hPa |
| Acidity (pKa) | 32.5 (−33 °C),[2] 10.5 (DMSO) |
| Basicity (pKb) | 4.75 |
Refractive index (nD)
|
1.3327 |
| Viscosity | 0.276 cP (−40 °C) |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
((Chembox
| Name = Ammonia
|Section2 = ((Chembox Properties
| Formula = NH<sub>3</sub>
| MolarMass = 17.031((nbsp))g·mol<sup>−1</sup>
| Appearance = Colourless gas
| Odor = Strong pungent odor
| Density = 0.86 kg·m<sup>−3</sup> (1.013((nbsp))bar at boiling point)<br
/>0.73 kg·m<sup>−3</sup> (1.013((nbsp))bar at 15 °C)<br
/>681.9 kg·m<sup>−3</sup> at −33.3 °C (liquid)
| MeltingPtC = −77.73
| BoilingPtC = −33.34
| Solubility = ((ubl
| 47% (0 °C)
| 31% (25 °C)
| 28% (50 °C)<ref>((cite book |url=https://books.google.com/?id=0fT4wfhF1AsC&pg=PA17 |page=17 |title=Handbook of inorganic compounds |last1=Perry |first1=Dale L. |last2=Phillips |first2=Sidney L. |publisher=CRC Press |year=1995 |isbn=0-8493-8671-3 ))</ref>
))
| SolubleOther = soluble in [[chloroform]], [[ether]], [[ethanol]], [[methanol]]
| Solvent =
| pKa = 32.5 (−33 °C),<ref>Perrin, D. D.; ''Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution'', 2nd ed., Oxford: Pergamon Press, '''1982'''</ref> 10.5 (DMSO)
| pKb = 4.75
| RefractIndex = 1.3327
| Viscosity = 0.276 cP (−40 °C)
| VaporPressure = 8573 hPa
| LogP = logP
))
))
Tracking category
TemplateData
TemplateData documentation used by VisualEditor and other tools
| ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
See a monthly parameter usage report for Template:Chembox Properties in articles based on its TemplateData.
TemplateData for Chembox Properties Adds a subsection to ((Chembox)). To be used: |Section2=((Chembox Properties|...))
| ||||||||||
See also
References
- ^ Perry, Dale L.; Phillips, Sidney L. (1995). Handbook of inorganic compounds. CRC Press. p. 17. ISBN 0-8493-8671-3.
- ^ Perrin, D. D.; Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, 2nd ed., Oxford: Pergamon Press, 1982