Template documentation[view] [edit] [history] [purge]

This template is used on approximately 3,280,000 pages, or roughly 5% of all pages.
To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them.

This template uses Lua:

Module:Infobox (sandbox)

(({title))}
(({above))}
(({subheader))}
(({subheader2))} ......
(({image))} (({caption))}
(({image2))} (({caption2))} ......
(({header1))} ( or )
(({label1))}	(({data1))}
( or ) (({data1))}
(({header2))} ( or )
(({label2))}	(({data2))}
( or ) (({data2))}
( etc )
(({below))}
v t e

Template:Infobox is intended as a meta template: a template used for constructing other templates. Note: In general, it is not meant for use directly in an article, but can be used on a one-off basis if required. Help:Infobox contains an introduction about the recommended content and design of infoboxes; Wikipedia:Manual of Style/Infoboxes contains additional style guidelines. See WP:List of infoboxes and Category:Infobox templates for lists of prepared topic-specific infoboxes.

Usage

((Infobox)) is a meta-template: used to organise an actual ((Infobox sometopic)) template (like ((Infobox building))).

For [[Template:Infobox sometopic]], template code then looks like this, simplified:

((Infobox
| name     = (({name|((PAGENAME))))}
| image    = (({image|))}
| caption1 = (({caption|))}

| label1   = Former names
|  data1   = (({former_names|))}

| header2  = General information

| label3   = Status
|  data3   = (({status|))}
... <!-- etc. -->
))

Optional control parameters

name: If this parameter is present, "view, talk and edit" links will be added to the bottom of the infobox pointing to the named page, prefixed by Template: if no namespace is specified. You may use the value ((subst:PAGENAME)); however, this is rarely what you want because it will send users clicking these links in an infobox to the template code rather than the data in the infobox they probably want to change.
child: See the Embedding section for details. If this is set to "yes", this child infobox should be titled but have no name parameter. This parameter is empty by default, set it to "yes" to activate it.
subbox: See the Subboxes section for details. If this is set to "yes", this subbox should be titled but have no name parameter. This parameter is empty by default, set to "yes" to activate it. It has no effect if the |child= parameter is also set to "yes".
decat: If this is set to "yes", the current page will not be autocategorized in a maintenance category when the generated infobox has some problems or no visible data section. Leave empty by default or set to "yes" to activate it.
autoheaders: If this is set to any non-blank value, headers which are not followed by data fields are suppressed. See the "hiding headers when all its data fields are empty" section for more details.

Content parameters

Title

There are two different ways to put a title on an infobox. One contains the title inside the infobox's border in the uppermost cell of the table, the other puts it as a caption on top of the table. You can use them both together, or just one or the other, or neither (though this is not recommended):

title: Text to put in the caption over the top of the table (or as section header before the whole content of this table, if this is a child infobox). For accessibility reasons, this is the most recommended alternative.
above: Text to put within the uppermost cell of the table.
subheader(n): additional title fields which fit below |title=} and |above=}, but before images.

Examples:

Text in caption over infobox
Subheader of the infobox
v t e

((Infobox
 | name       = ((subst:PAGENAME))
 | title      = Text in caption over infobox
 | subheader  = Subheader of the infobox
 | header     = (the rest of the infobox goes here)
))

Text in uppermost cell of infobox
Subheader of the infobox
Second subheader of the infobox
v t e

((Infobox
 | name       = ((subst:PAGENAME))
 | above      = Text in uppermost cell of infobox
 | subheader  = Subheader of the infobox
 | subheader2 = Second subheader of the infobox
 | header     = (the rest of the infobox goes here)
))

Illustration images

image(n): images to display at the top of the template. Use full image syntax, for example [[File:example.png|200px|alt=Example alt text]]. Image is centered by default. See WP:ALT for more on alt text.
caption(n): Text to put underneath the images.

Main data

header(n): Text to use as a header in row n.
label(n): Text to use as a label in row n.
data(n): Text to display as data in row n.

Note: for any given value for (n), not all combinations of parameters are permitted. The presence of a |header(n)= will cause the corresponding |data(n)= (and |rowclass(n)= |label(n)=, see below) to be ignored; the absence of a |data(n)= will cause the corresponding |label(n)= to be ignored. Valid combinations for any single row are:

|class(n)= |header(n)=
|rowclass(n)= |class(n)= |data(n)=
|rowclass(n)= |label(n)= |class(n)= |data(n)=

See the rendering of header4, label4, and data4 in the Examples section below.

Number ranges

To allow flexibility when the layout of an infobox is changed, it may be helpful when developing an infobox to use non-contiguous numbers for header and label/data rows. Parameters for new rows can then be inserted in future without having to renumber existing parameters. For example:

 | header3  = Section 1
 |  label5  = Label A
 |   data5  = Data A
 |  label7  = Label C
 |   data7  = Data C
 | header10 = Section 2
 |  label12 = Label D
 |   data12 = Data D

It is also possible to automatically renumber parameter names by using User:Frietjes/infoboxgap.js or Module:IncrementParams.

There is no upper limit on numbers but there must be at most 50 between each used number.

Making data fields optional

A row with a label but no data is not displayed. This allows for the easy creation of optional infobox content rows. To make a row optional use a parameter that defaults to an empty string, like so:

 | label5 = Population
 |  data5 = (({population|))}

This way if an article doesn't define the population parameter in its infobox the row won't be displayed.

For more complex fields with pre-formatted contents that would still be present even if the parameter wasn't set, you can wrap it all in an "#if" statement to make the whole thing vanish when the parameter is not used. For instance, the "#if" statement in the following example reads "#if:the parameter mass has been supplied |then display it, followed by 'kg'":

 | label6 = Mass
 |  data6 = (( #if: (({mass|))} | (({mass))} kg ))

For more on #if, see here.

Hiding headers when all its data fields are empty

You can also make headers automatically hide when their section is empty (has no data-row showing).

Consider this situation:

Example: header with & without data
Header1 with empty section
Header5 with data below
label6 text	Some value

((Infobox
 | title   = Example: header with & without data
 | headerstyle = background: lightgrey

 | header1 = Header1 with empty section
 |  label2 = label2 text |  data2 =
 |  label3 = label3 text |  data3 =
 |  label4 = label4 text |  data4 =

 | header5 = Header5 with data below
 |  label6 = label6 text |   data6 = Some value
))

If you want hide the header when no |dataN= values are present, use |autoheaders=y:

Example: header with & without data
Header5 with data below
label6 text	Some value

((Infobox
 | title   = Example: header with & without data
 | autoheaders = y
 | headerstyle = background: lightgrey

 | header1 = Header1 with empty section
 |  label2 = label2 text |  data2 =
 |  label3 = label3 text |  data3 =
 |  label4 = label4 text |  data4 =

 | header5 = Header5 with data below
 |  label6 = label6 text |  data6 = Some value
))

So, header1 will be shown if any of item1, item2, or item3 is defined. If none of the three parameters are defined the header won't be shown and no empty row appears before the next visible content.

Note: if the data has empty css elements, like |data=<span style="background:yellow;"></span>, this will be treated as non-empty (having data).

If |autoheaders=y but there are items that you do not want to trigger a header, place |headerX=_BLANK_. This will serve as an empty header and separate it from the subsequent items.

Example: blank header with & without data
label6 text	Some value, but does not trigger header1 or show header5

((Infobox
 | title   = Example: header with & without data
 | autoheaders = y
 | headerstyle = background: lightgrey

 | header1 = Header1 with empty section
 |  label2 = label2 text |  data2 =
 |  label3 = label3 text |  data3 =
 |  label4 = label4 text |  data4 =

 | header5 = _BLANK_
 |  label6 = label6 text |  data6 = Some value, but does not trigger header1 or show header5
))

Footer

below: Text to put in the bottom cell. The bottom cell is intended for footnotes, see-also, and other such information.

Presentation parameters

Italic titles

Titles of articles with infoboxes may be made italic, in line with WP:ITALICTITLE, by passing the italic title parameter.

Turn on italic titles by passing |italic title=(({italic title|))} from the infobox.
Turn off by default (notably because only Latin script may be safely rendered in this style and italic may be needed to distinguish foreign language from local English language only in that script, but would be difficult to read for other scripts) but allow some instances to be made italic by passing |italic title=(({italic title|no))}
Do not make any titles italic by not passing the parameter at all.

CSS styling

bodystyle: Applies to the infobox table as a whole
titlestyle: Applies only to the title caption. Adding a background color is usually inadvisable since the text is rendered "outside" the infobox.
abovestyle: Applies only to the "above" cell at the top. The default style has font-size:125%; since this cell is usually used for a title, if you want to use the above cell for regular-sized text include "font-size:100%;" in the abovestyle.
imagestyle: Applies to the cell the image is in. This includes the text of the image caption, but you should set text properties with captionstyle instead of imagestyle in case the caption is moved out of this cell in the future.
captionstyle: Applies to the text of the image caption.
rowstyle(n): This parameter is inserted into the style attribute for the specified row.
headerstyle: Applies to all header cells
subheaderstyle: Applies to all subheader cells
labelstyle: Applies to all label cells
datastyle: Applies to all data cells
belowstyle: Applies only to the below cell

HTML classes and microformats

bodyclass: This parameter is inserted into the class attribute for the infobox as a whole.
titleclass: This parameter is inserted into the class attribute for the infobox's title caption.
aboveclass: This parameter is inserted into the class attribute for the infobox's above cell.
subheaderrowclass(n): This parameter is inserted into the class attribute for the complete table row the subheader is on.
subheaderclass(n): This parameter is inserted into the class attribute for the infobox's subheader.
imagerowclass(n): These parameters are inserted into the class attribute for the complete table row their respective image is on.
imageclass: This parameter is inserted into the class attribute for the image.
rowclass(n): This parameter is inserted into the class attribute for the specified row including the label and data cells.
class(n): This parameter is inserted into the class attribute for the data cell of the specified row. If there's no data cell it has no effect.
belowclass: This parameter is inserted into the class attribute for the infobox's below cell.

This template supports the addition of microformat information. This is done by adding "class" attributes to various data cells, indicating what kind of information is contained within. Multiple class names may be specified, separated by spaces, some of them being used as selectors for custom styling according to a project policy or to the skin selected in user preferences, others being used for microformats.

To flag an infobox as containing hCard information, for example, add the following parameter:

 | bodyclass = vcard

And for each row containing a data cell that's part of the vcard, add a corresponding class parameter:

 | class1 = fn
 | class2 = org
 | class3 = tel

...and so forth. "above" and "title" can also be given classes, since these are usually used to display the name of the subject of the infobox.

See Wikipedia:WikiProject Microformats for more information on adding microformat information to Wikipedia, and microformat for more information on microformats in general.

Examples

Notice how the row doesn't appear in the displayed infobox when a label is defined without an accompanying data cell, and how all of them are displayed when a header is defined on the same row as a data cell. Also notice that subheaders are not bold by default like the headers used to split the main data section, because this role is meant to be for the above cell :

Test Infobox
Above text
Subheader above image
Second subheader
Caption displayed below File:Example-serious.jpg
Header defined alone
Data defined alone
All three defined (header, label, data, all with same number)
Label and data defined (label)	Label and data defined (data)
Below text
v t e

((Infobox
 |name         = Infobox/doc
 |bodystyle    = 

 |titlestyle   = 
 |abovestyle   = background: #cfc;
 |subheaderstyle =
 |title        = Test Infobox
 |above        = Above text
 |subheader    = Subheader above image
 |subheader2   = Second subheader

 |imagestyle   = 
 |captionstyle = 
 |image        = [[File:Example-serious.jpg|200px|alt=Example alt text]]
 |caption      = Caption displayed below File:Example-serious.jpg

 |headerstyle  = background: #ccf;
 |labelstyle   = background: #ddf;
 |datastyle    = 

 |header1 = Header defined alone
 | label1 = 
 |  data1 = 
 |header2 = 
 | label2 = Label defined alone does not display (needs data, or is suppressed)
 |  data2 = 
 |header3 =
 | label3 = 
 |  data3 = Data defined alone
 |header4 = All three defined (header, label, data, all with same number)
 | label4 = does not display (same number as a header)
 |  data4 = does not display (same number as a header)
 |header5 =
 | label5 = Label and data defined (label)
 |  data5 = Label and data defined (data)

 |belowstyle = background: #ddf;
 |below      = Below text
))

For this example, the |bodystyle= and |labelstyle= parameters are used to adjust the infobox width and define a default width for the column of labels:

Test Infobox
Header 4
Label 1	Data 1
Label 2	Data 2
Label 3	Data 3
Label 5	Data 5: Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Below text
v t e

((Infobox
 |name        = Infobox/doc
 |bodystyle   = width: 20em

 |titlestyle  = 
 |title       = Test Infobox

 |headerstyle = 
 |labelstyle  = width: 33%
 |datastyle   = 

 |header1 = 
 | label1 = Label 1
 |  data1 = Data 1
 |header2 = 
 | label2 = Label 2
 |  data2 = Data 2
 |header3 = 
 | label3 = Label 3
 |  data3 = Data 3
 |header4 = Header 4
 | label4 = 
 |  data4 = 
 |header5 = 
 | label5 = Label 5
 |  data5 = Data 5: Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

 |belowstyle = 
 |below = Below text
))

Embedding

One infobox template can be embedded into another using the |child= parameter. This feature can be used to create a modular infobox, or to create better-defined logical sections. Long ago, it was necessary to use embedding in order to create infoboxes with more than 99 rows; but nowadays there's no limit to the number of rows that can be defined in a single instance of ((infobox)).

Top level title
First subsection
Label 1.1	Data 1.1

Second subsection
Label 2.1	Data 2.1

Below text

((Infobox
 | title = Top level title
 | data1 = ((Infobox | decat = yes | child = yes
    | title = First subsection
    | label1= Label 1.1
    | data1 = Data 1.1
   ))
 | data2 = ((Infobox | decat = yes | child = yes
  |title = Second subsection
  | label1= Label 2.1
  | data1 = Data 2.1
  ))
 | belowstyle = 
 | below = Below text
))

Note, in the examples above, the child infobox is placed in a data field, not a header field. Notice that the section subheadings are not in bold font if bolding is not explicitly specified. To obtain bold section headings, place the child infobox in a header field (but not in a label field because it would not be displayed!), either using

Top level title
First subsection
Label 1.1	Data 1.1

Second subsection
Label 2.1	Data 2.1

Below text

((Infobox
 | title = Top level title
 | header1 = ((Infobox | decat = yes | child = yes
    | title = First subsection
    | label1= Label 1.1
    | data1 = Data 1.1
   ))
 | header2 = ((Infobox | decat = yes | child = yes
    | title = Second subsection
    | label1= Label 2.1
    | data1 = Data 2.1
   ))
 | belowstyle = 
 | below = Below text
))

or,

Top level title
First subsection
Label 1.1	Data 1.1

Second subsection
Label 2.1	Data 2.1

Below text

((Infobox
 | title = Top level title
 | header1 = First subsection
   ((Infobox | decat = yes | child = yes
    | label1 = Label 1.1
    |   data1 = Data 1.1
   ))
 | header2 = Second subsection
   ((Infobox | decat = yes | child = yes
    | label1 = Label 2.1
    |  data1 = Data 2.1
   ))
 | belowstyle = 
 | below = Below text
))

Note that omitting the |title= parameter, and not including any text preceding the embedded infobox, may result in spurious blank table rows, creating gaps in the visual presentation. The garbage output can be suppressed using |rowstyleN=display: none, replacing N with the data/header number.

Wikipedia:WikiProject Infoboxes/embed includes some links to Wikipedia articles which include infoboxes embedded within other infoboxes.

Subboxes

An alternative method for embedding is to use |subbox=yes, which removes the outer border from the infobox, but preserves the interior structure. One feature of this approach is that the parent and child boxes need not have the same structure, and the label and data fields are not aligned between the parent and child boxes because they are not in the same parent table.

Main 1

Main 2

Sub 3-1
Sub 3-2
Label 3-3	Data 3-3

Label 4-1	Data 4-1

Label 5

Data 5

Main 6

((Infobox
 | headerstyle = background-color: #eee;
 | labelstyle  = background-color: #eee;
 | header1 = Main 1
 | header2 = Main 2
 |   data3 = ((Infobox | subbox = yes
    | headerstyle = background-color: #ccc;
    | labelstyle  = background-color:#ddd;
    | header1 = Sub 3-1
    | header2 = Sub 3-2
    |  label3 = Label 3-3    |   data3 = Data 3-3
   ))
 |   data4 = ((Infobox | subbox = yes
    | labelstyle  = background-color: #ccc;
    |  label1 = Label 4-1    |   data1 = Data 4-1
   ))
 |  label5 = Label 5 |   data5 = Data 5
 | header6 = Main 6
))

Similar embedding techniques may be used within content parameters of some other templates generating tables (such as Sidebar):

((Sidebar
 | navbar = off
 | headingstyle = background-color: #eee;
 | heading1 = Heading 1
 | heading2 = Heading 2
 | content3 = ((Infobox | subbox = yes
    | headerstyle = background-color: #ccc;
    | labelstyle = background-color: #ddd;
    | header1 = Sub 3-1
    | header2 = Sub 3-2
    |  label3 = Label 3-3 |   data3 = Data 3-3
   ))
 | content4 = ((Infobox | subbox = yes
    | labelstyle = background-color: #ccc;
    |  label1 = Label 4-1 |   data1 = Data 4-1
   ))
 | heading5 = Heading 5
))

Note that the default padding of the parent data cell containing each subbox is still visible, so the subboxes are slightly narrower than the parent box and there's a higher vertical spacing between standard cells of the parent box than between cells of distinct subboxes.

Controlling line-breaking in embedded bulletless lists

Template ((nbsp)) may be used with ((wbr)) and ((nowrap)) to control line-breaking in bulletless lists embedded in infoboxes (e.g. cast list in ((Infobox film))), to prevent wrapped long entries from being confused with multiple entries. See Template:Wbr/doc#Controlling line-breaking in infoboxes for details.

Full blank syntax

(Note: there is no limit to the number of possible rows; only 20 are given below since infoboxes larger than that will be relatively rare. Just extend the numbering as needed. The microformat "class" parameters are also omitted as they are not commonly used.)

((Infobox
| name           = ((subst:PAGENAME))
| child          = (({child|))}
| subbox         = (({subbox|))}
| italic title   = (({italic title|no))}
| templatestyles = 
| child templatestyles = 
| grandchild templatestyles = 
| bodystyle      = 

| titlestyle     = 
| abovestyle     = 
| subheaderstyle = 
| title          = 
| above          = 
| subheader      = 

|   imagestyle   = 
| captionstyle   = 
|   image        = 
| caption        = 
|   image2       = 
| caption2       = 

| headerstyle    = 
|  labelstyle    = 
|   datastyle    = 
| header1  = 
|  label1  = 
|   data1  = 
| header2  = 
|  label2  = 
|   data2  = 
| header3  = 
|  label3  = 
|   data3  = 
| header4  = 
|  label4  = 
|   data4  = 
| header5  = 
|  label5  = 
|   data5  = 
| header6  = 
|  label6  = 
|   data6  = 
| header7  = 
|  label7  = 
|   data7  = 
| header8  = 
|  label8  = 
|   data8  = 
| header9  = 
|  label9  = 
|   data9  = 
| header10 = 
|  label10 = 
|   data10 = 
| header11 = 
|  label11 = 
|   data11 = 
| header12 = 
|  label12 = 
|   data12 = 
| header13 = 
|  label13 = 
|   data13 = 
| header14 = 
|  label14 = 
|   data14 = 
| header15 = 
|  label15 = 
|   data15 = 
| header16 = 
|  label16 = 
|   data16 = 
| header17 = 
|  label17 = 
|   data17 = 
| header18 = 
|  label18 = 
|   data18 = 
| header19 = 
|  label19 = 
|   data19 = 
| header20 = 
|  label20 = 
|   data20 = 

| belowstyle     = 
| below          = 
))

Infoboxes and user style

Users can have user CSS that hides any infoboxes in their own browsers.

To hide all infoboxes, add the following to Special:MyPage/common.css (for all skins, or Special:MyPage/skin.css for just the current skin), on a line by itself:

div.mw-parser-output .infobox { display: none; }

Alternatively, you can add the following code to your common.js or into a browser user script that is executed by an extension like Greasemonkey:

$('.infobox').hide();

Be aware that although, per WP:Manual of Style/Infoboxes, all information in an infobox ideally should also be found in the main body of an article, there isn't perfect compliance with this guideline. For example, the full taxonomic hierarchy in ((Taxobox)), and the OMIM and other medical database codes of ((Infobox disease)) are often not found in the main article content. The infobox is also often the location of the most significant, even only, image in an article. There is a userscript which removes infoboxes but moves the images contained to separate thumbnails: User:Maddy from Celeste/disinfobox.js.

Porting to other MediaWikis

The infobox template requires the Scribunto and TemplateStyles extensions. WikiProject Transwiki has a version of this template that has been modified to work on other MediaWikis.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox in articles based on its TemplateData.

TemplateData for Infobox

This template is intended as a meta template, a template used for constructing other templates. In general, it is not meant for use directly in an article but can be used on a one-off basis if required.

Template parameters[Edit template data]
This template has custom formatting.
Parameter		Description	Type	Status
name	`name`		Unknown	optional
child	`child`		Unknown	optional
subbox	`subbox`		Unknown	optional
italic title	`italic title`		Unknown	optional
templatestyles	`templatestyles`		Unknown	optional
child templatestyles	`child templatestyles`		Unknown	optional
grandchild templatestyles	`grandchild templatestyles`		Unknown	optional
bodystyle	`bodystyle`		Unknown	optional
titlestyle	`titlestyle`		Unknown	optional
abovestyle	`abovestyle`		Unknown	optional
subheaderstyle	`subheaderstyle`		Unknown	optional
Title	`title`	Title displayed above the infobox	String	suggested
above	`above`		Unknown	optional
subheader	`subheader`		Unknown	optional
imagestyle	`imagestyle`		Unknown	optional
captionstyle	`captionstyle`		Unknown	optional
Image	`image`	Image illustrating the topic. Use full image syntax. Example [[File:example.png\|200px\|alt=Example alt text]]	Content	suggested
Caption	`caption`	caption for the image	Content	suggested
image2	`image2`		Unknown	optional
caption2	`caption2`		Unknown	optional
headerstyle	`headerstyle`		Unknown	optional
labelstyle	`labelstyle`		Unknown	optional
datastyle	`datastyle`		Unknown	optional
header1	`header1`		Unknown	optional
label1	`label1`		Unknown	optional
data1	`data1`		Unknown	optional
header2	`header2`		Unknown	optional
label2	`label2`		Unknown	optional
data2	`data2`		Unknown	optional
header3	`header3`		Unknown	optional
label3	`label3`		Unknown	optional
data3	`data3`		Unknown	optional
header4	`header4`		Unknown	optional
label4	`label4`		Unknown	optional
data4	`data4`		Unknown	optional
header5	`header5`		Unknown	optional
label5	`label5`		Unknown	optional
data5	`data5`		Unknown	optional
header6	`header6`		Unknown	optional
label6	`label6`		Unknown	optional
data6	`data6`		Unknown	optional
header7	`header7`		Unknown	optional
label7	`label7`		Unknown	optional
data7	`data7`		Unknown	optional
header8	`header8`		Unknown	optional
label8	`label8`		Unknown	optional
data8	`data8`		Unknown	optional
header9	`header9`		Unknown	optional
label9	`label9`		Unknown	optional
data9	`data9`		Unknown	optional
header10	`header10`		Unknown	optional
label10	`label10`		Unknown	optional
data10	`data10`		Unknown	optional
header11	`header11`		Unknown	optional
label11	`label11`		Unknown	optional
data11	`data11`		Unknown	optional
header12	`header12`		Unknown	optional
label12	`label12`		Unknown	optional
data12	`data12`		Unknown	optional
header13	`header13`		Unknown	optional
label13	`label13`		Unknown	optional
data13	`data13`		Unknown	optional
header14	`header14`		Unknown	optional
label14	`label14`		Unknown	optional
data14	`data14`		Unknown	optional
header15	`header15`		Unknown	optional
label15	`label15`		Unknown	optional
data15	`data15`		Unknown	optional
header16	`header16`		Unknown	optional
label16	`label16`		Unknown	optional
data16	`data16`		Unknown	optional
header17	`header17`		Unknown	optional
label17	`label17`		Unknown	optional
data17	`data17`		Unknown	optional
header18	`header18`		Unknown	optional
label18	`label18`		Unknown	optional
data18	`data18`		Unknown	optional
header19	`header19`		Unknown	optional
label19	`label19`		Unknown	optional
data19	`data19`		Unknown	optional
header20	`header20`		Unknown	optional
label20	`label20`		Unknown	optional
data20	`data20`		Unknown	optional
belowstyle	`belowstyle`		Unknown	optional
below	`below`		Unknown	optional