ToneScript is a description syntax for the characteristics of call-progress tones.
A call progress tone is a pattern of audible tones played to the caller in a telephone call, conveying the status of the call. ToneScript describes the pattern of frequency, cadence, and level of the signal. Many Internet telephony devices support configuration options for users to customize the tones, but standard patterns are provided for various telephone administrations. ToneScript is used in Sipura, Linksys and Cisco family of IP telephony products.
Name | ToneScript |
---|---|
Dial tone | 350@-19,440@-19;10(*/0/1+2) |
Second dial tone | 350@-19,440@-19;10(*/0/1+2) |
Outside dial tone | 450@-19,550@-19;10(*/0/1+2) |
Prompt tone | 520@-19,620@-19;10(*/0/1+2) |
Busy tone | 480@-19,620@-19;10(.5/.5/1+2) |
Reorder tone | 480@-19,620@-19;10(.25/.25/1+2) |
Howler/off-hook warning tone | 480@-10,620@0;10(.125/.125/1+2) |
Audible ringing | 440@-19,480@-19;*(2/4/1+2) |
Confirm tone | 600@-16;1(.25/.25/1) |
Special information tone SIT1 | 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0) |
Special information tone SIT2 | 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0) |
Special information tone SIT3 | 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0) |
Special information tone SIT4 | 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0) |
MWI dial tone | 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2) |
Call forward dial tone | 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2) |
Holding tone | 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1) |
Conference call tone | 350@-19;20(.1/.1/1,.1/9.7/1) |
Call waiting tone | 440@-10;30(.3/9.7/1) |
Name | ToneScript |
---|---|
Dial tone | 400@-19,425@-19;10(*/0/1+2) |
Busy tone | 425@-19;10(.375/.375/1) |
Reorder tone | 425@-19,425@-29;60(.375/.375/1,.375/.375/2) |
Ringback tone | 413@-19,438@-19,0@-19;*(.4/.2/1+2,.4/.2/1+2,0/2/3) |
Confirm tone | 425@-16;2(1/1/1) |
MWI dial tone | 400@-19,425@-19;10(.100/.040/1+2) |
Cfwd dial tone | 425@-19;10(*/0/1) |
Conference tone | 525@-16;2.5(.3/0/3,1/1/1) |
Call waiting tone | 425@-25,0@-25;30(.2/.2/1,.2/.2/1,0/4.4/3) |
Name | ToneScript |
---|---|
Dial tone (ETSI standard) | 425@-17;60(*/0/1) |
Second dial tone | 335@-19,425@-19;45(*/0/1+2) |
Busy tone (ETSI standard) | 425@-19; 30(0.5/0.5/1) |
Reorder tone (ETSI standard) | 425@-19; 30(.2/.2/1) |
Ringback tone (same as UK, NZ etc.) | 400@-19,450@-19;*(.4/.2/1+2,.4/.2/1+2,2/0/0) |
Special information tone SIT (ETSI standard) | 950@-16,1400@-16,1800@-16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0) |
MWI dial tone | 425@-19;2(.1/.1/1);58(*/0/1) |
Call forward dial tone | 400@-16,432@-18;30(0.4/0/1,0.4/0/2) |
Call waiting tone | 425@-19;30(.3/9.7/1) |
Confirm tone / routing tone | 425@-19;1.5(0.06/0.06/1); |
Prompt tone | 335@-19,425@-19;20(*/0/1+2) |
(ETSI standard) is indicated where tones are in compliance with European Telecommunications Standards Institute recommendations.