US 281 has two signed segments near its southern terminus in the Rio Grande Valley, both of which are signed west–east. The eastern segment, considered mainline US 281 by TxDOT, begins in Brownsville at an intersection with Business US 77 and SH 48 about 2 miles (3.2 km) from the Mexico border, and travels west through several communities along the border to Pharr.[1][2] The western segment, officially listed as a spur connection by TxDOT and often labeled on maps as US 281 Spur, begins just north of the McAllen–Hidalgo–Reynosa International Bridge in Hidalgo and travels north along International Boulevard before turning east onto Coma Avenue and entering Pharr.[1][3] The two segments (along with Spur 600, which provides access to the Pharr–Reynosa International Bridge) meet at Cage Boulevard, where signage changes to south–north, and the highway turns to the north.[4] North of the interchange with I-2, US 281 is concurrent with I-69C to that route's northern terminus (as of December 2015[update]) in Edinburg.[5] US 281 travels through small towns and sparsely-populated areas, alternating between a divided highway and a main street and passing through a Border Patrol checkpoint south of Falfurrias,[6] until joining I-37 north of Three Rivers. The two routes split south of Pleasanton and separately travel northward to San Antonio.
In San Antonio, US 281 overlaps I-410 on the south side of the city until another interchange with I-37. US 281 and I-37 then overlap north into Downtown San Antonio until I-37 ends at I-35. US 281 continues north from Downtown San Antonio as the McAllister Freeway, intersecting I-410 again at a stack interchange in Uptown San Antonio, with access to the San Antonio International Airport. The freeway ends several miles north of Loop 1604. In Central Texas, it serves as the main street of Blanco before beginning a concurrency with US 290 south of Johnson City. As US 290 continues toward Austin, US 281 and US 290 provide a scenic and less congested alternative to I-35 between San Antonio and Austin. The two routes split in the city, with US 281 continuing toward Marble Falls, Burnet, and Lampasas.
This section needs expansion. You can help by adding to it. (December 2015)
A project to construct a stack interchange at I-410 (the "San Antonio Web"[7]) was completed June 9, 2008;[8] formerly there was no direct access between the two freeways and surface streets were required to travel between the freeways. The reason for this initial lack of direct interchange was due to litigation filed in the late 1960s against the Texas Highway Department over the highway's original construction alignment through portions of Brackenridge Park and Olmos Park that were alleged to be in violation of several Federal laws, ultimately including NEPA. As a result of the Supreme Court decision[9] in a more advanced and very similar case involving the proposed construction of I-40 through Overton Park in Memphis, Tennessee which upheld and affirmed the plaintiffs in that circumstance and precluded that highway's construction through the parkland with Federal funding, the Texas Highway Department chose instead to construct the McAlister Freeway entirely with State funding using a modified design that would increase curvature but limit encroachment into and noise impact on the Sunken Gardens area within Brackenridge Park. Funding of various highway projects from around Texas was re-allocated to the McAlister Freeway project, which was initially completed with only the indirect interchange via existing surface streets to Loop 410 since it required no Federal funding or approval and the Loop 410 overpass of that location where the McAlister Freeway main lanes would pass beneath had already been completed many years earlier.
In 2010, US 281 from Loop 1604 to Bulverde Road in north San Antonio was re-constructed as a superstreet.[10] Groundbreaking was held on March 11, 2010 with construction finishing later that year in September.[11]
The highway was expanded from a two-lane highway to a four-lane divided highway from River Crossing to the Comal-Blanco county line at a cost of $30.5 million.[12]
Future
The section of US 281 from I-2/US 83 in Pharr to George West is steadily being upgraded to an interstate-grade freeway as part of the Interstate 69 expansion, and will be signed as Interstate 69C. The bypass for Premont is under construction scheduled for completion in 2024.[13]
The section of US 281 from Loop 1604 to the Bexar–Comal county line currently experiences heavy congestion during peak hours, being the most congested highway in Bexar County.[14] TxDOT is upgrading this section of highway from a superstreet to a limited–access freeway, with construction beginning in 2017 and concluding in 2022. Section 1, from Loop 1604 to Stone Oak Parkway, is planned to be constructed from 2017 to 2020. Section 2, from Stone Oak Parkway to Borgfeld Drive, is planned to be constructed from 2019 to 2022.[15] The project will cost $532 million.[16] Ground breaking for the project was held on March 31, 2017 with construction officially beginning on July 17.[17][18]
^Transportation Planning and Programming Division (2018). Texas County Mapbook(PDF) (Map) (2018 ed.). 1:72,224. Texas Department of Transportation. p. 2258. Retrieved June 18, 2022.
I-44 / US 277 / US 281 at Texas-Oklahoma state line in Burkburnett
