USS Ingraham (DD-111)
History
United States
NamesakeDuncan Nathaniel Ingraham
BuilderUnion Iron Works, San Francisco, California
Laid down12 January 1918
Launched4 July 1918
Commissioned15 May 1919
Decommissioned29 June 1922
Reclassified17 July 1920, DM-9
Stricken1 December 1936
FateSunk as target off Pearl Harbor 23 July 1937
General characteristics
Class and typeWickes-class destroyer
Displacement
  • 1,202–1,208 long tons (1,221–1,227 t) (standard)
  • 1,295–1,322 long tons (1,316–1,343 t) (deep load)
Length314 ft 4 in (95.8 m)
Beam30 ft 11 in (9.42 m)
Draught9 ft 10 in (3.0 m)
Installed power
Propulsion2 shafts, 2 steam turbines
Speed35 knots (65 km/h; 40 mph) (design)
Range2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design)
Complement6 officers, 108 enlisted men
Armament

USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.

Description

The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s.[1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men.[2]

Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph).[3]

The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns.[1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships.[4]

Construction and career

Ingraham, named for Duncan Nathaniel Ingraham, was launched 4 July 1918 by the Union Iron Works, San Francisco, California; sponsored by Mrs. Alfred S. Gann; and commissioned 15 May 1919. Ingraham departed 20 May for her shakedown cruise, transiting the Panama Canal and arriving Newport, Rhode Island 6 June. After repairs in New York, she sailed for a European tour of duty. While visiting Ostend, Belgium 22 September, she carried the King and Queen of Belgium to Calais, France. The destroyer returned to San Diego 8 January 1920 via New York and the Canal Zone to begin conversion to a minelayer.

Reclassified DM-9, Ingraham began minelaying exercises January 1921 along the California coast before departing Mare Island 7 June. She arrived at Pearl Harbor 18 June and engaged in operations there until she decommissioned at Pearl Harbor 29 June 1922. Her name was struck from the Navy List 1 December 1936 and she was sunk as target off Pearl Harbor on 23 July 1937.

Notes

  1. ^ a b Gardiner & Gray, p. 124
  2. ^ Friedman, pp. 401–03
  3. ^ Friedman, pp. 39–42, 401–03
  4. ^ Friedman, p. 45

References

External links

Wickes-class destroyers
Categories