| Development | |
|---|---|
| Designer | Robert B. Harris |
| Location | Canada |
| Year | 1983 |
| No. built | 28 |
| Builder(s) | Vancouver 25 Yacht Company |
| Role | Cruiser |
| Name | Vancouver 25 |
| Boat | |
| Displacement | 7,380 lb (3,348 kg) |
| Draft | 4.00 ft (1.22 m) |
| Hull | |
| Type | monohull |
| Construction | fibreglass |
| LOA | 29.00 ft (8.84 m) |
| LWL | 21.67 ft (6.61 m) |
| Beam | 8.50 ft (2.59 m) |
| Engine type | Yanmar 1GM 15 hp (11 kW) diesel engine |
| Hull appendages | |
| Keel/board type | long keel |
| Ballast | 2,600 lb (1,179 kg) |
| Rudder(s) | keel-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 33.60 ft (10.24 m) |
| J foretriangle base | 11.10 ft (3.38 m) |
| P mainsail luff | 28.80 ft (8.78 m) |
| E mainsail foot | 13.50 ft (4.11 m) |
| Sails | |
| Sailplan | masthead sloop |
| Mainsail area | 194.40 sq ft (18.060 m2) |
| Jib/genoa area | 186.48 sq ft (17.325 m2) |
| Total sail area | 380.39 sq ft (35.339 m2) |
The Vancouver 25 is a Canadian trailerable sailboat that was designed by Robert B. Harris as a blue water cruiser and first built in 1983.[1][2][3]
The design was built in Taiwan under contract to the Vancouver 25 Yacht Company of Canada, starting in 1983. A total of 28 boats were completed, but it is now out of production.[1][3]
The Vancouver 25 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a raked stem with a bowsprit, a rounded transom, with a boomkin, a keel-mounted rudder controlled by a tiller and a fixed long keel. It displaces 7,380 lb (3,348 kg) and carries 2,600 lb (1,179 kg) of lead ballast.[1][3]
The boat has a draft of 4.00 ft (1.22 m) with the standard long keel.[1][3]
The boat is fitted with a Japanese Yanmar 1GM diesel engine of 7.5 or 15 hp (6 or 11 kW) for docking and manoeuvring. The fuel tank holds 20 U.S. gallons (76 L; 17 imp gal) and the dual stainless steel fresh water tanks have a capacity of 54 U.S. gallons (200 L; 45 imp gal).[1][3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, a straight settee in the main cabin and an aft cabin with a single berth on the starboard side. The galley is located on the starboard side amidships. The galley is equipped with a two-burner stove and a sink. A navigation station is beside the companionway steps, on the port side. The head is located just aft of the bow cabin on the port side and includes a stand-up shower. Cabin headroom is 71 in (180 cm).[1][3]
The design has a hull speed of 6.2 kn (11.5 km/h).[3]
In a 2010 review Steve Henkel wrote, "not many of these beefy Taiwan-built imports were made, perhaps because they weren't heavily advertised. But we can picture taking off from Seattle to cruise the Inside Passage to Alaska, or even doing a partial circumnavigation in one of these. Best features: Full cruising amenities are unusual in a boat this size: boom gallows, stern anchor roller chock on the boomkin, long companionway dodger, stand-up shower, large water and fuel tanks, big chart table, good ventilation, lots of storage space. Owners say she is extremely seakindly, and tracks her course well. Her outboard rudder makes mounting a windvane (such as a Monitor) relatively convenient. Standard equipment is extensive and generally of high quality (e.g, two stainless steel water tanks, dorade vents, etc.). Worst features: Some of her through-hull fittings are difficult to access. Hull may be susceptible to some small-scale blistering. The 15 hp Yanmar is said to move the boat at only five knots, possibly indicating either insufficient horsepower or the wrong prop selection. The theoretical hull speed based on waterline length is 6.2 knots. The battenless mainsail, supposedly for easier reefing, doesn't make sense to us. We'd add 'em."[3]