You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.201.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 23:54, 31 July 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 April 2025
Your current IP address is 44.201.244.194. The blocked range is 44.201.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Resistometer))
((More citations needed|date=March 2019))
[[Image:Wheatstonebridge.svg|thumb|300px|alt=A Wheatstone bridge has four resistors forming the sides of a diamond shape. A battery is connected across one pair of opposite corners, and a galvanometer across the other pair. |Wheatstone bridge [[circuit diagram]]. The unknown resistance ''R''<sub>''x''</sub> is to be measured; resistances ''R''<sub>1</sub>, ''R''<sub>2</sub> and ''R''<sub>3</sub> are known, where ''R''<sub>2</sub> is adjustable. When the measured voltage ''V''<sub>''G''</sub> is 0, both legs have equal voltage ratios: ''R''<sub>2</sub>/''R''<sub>1</sub> =&nbsp;''R''<sub>''x''</sub>/''R''<sub>3</sub> and ''R''<sub>''x''</sub>=&nbsp;''R''<sub>3</sub>''R''<sub>2</sub>/''R''<sub>1</sub>.]]
A '''Wheatstone bridge''' is an [[electrical circuit]] used to measure an unknown [[electrical resistance]] by balancing two legs of a [[bridge circuit]], one leg of which includes the unknown component. The primary benefit of the circuit is its ability to provide extremely accurate measurements (in contrast with something like a simple [[voltage divider]]).<ref>"Circuits in Practice: The Wheatstone Bridge, What It Does, and Why It Matters", as discussed in this MIT ES.333 class [https://www.youtube.com/watch?v=-G-dySnSSG4 video]</ref> Its operation is similar to the original [[Potentiometer (measuring instrument)|potentiometer]].

The Wheatstone bridge was invented by [[Samuel Hunter Christie]] (sometimes spelled "Christy") in 1833 and improved and popularized by Sir [[Charles Wheatstone]] in 1843.<ref>((cite journal |last=Wheatstone |first=Charles |date=1843 |title=XIII. The Bakerian lecture.—An account of several new instruments and processes for determining the constants of a voltaic circuit |journal=Phil. Trans. R. Soc. |volume=133 |pages=303–327 |doi=10.1098/rstl.1843.0014))</ref>  One of the Wheatstone bridge's initial uses was for [[soil analysis]] and comparison.<ref>((cite journal |title=The Genesis of the Wheatstone Bridge |first=Stig |last=Ekelof |journal=Engineering Science and Education Journal |volume=10 |issue=1 |date=February 2001 |pages=37–40 |doi=10.1049/esej:20010106  |url=https://edisciplinas.usp.br/pluginfile.php/5618117/mod_resource/content/1/The%20genesis%20of%20Wheatstone%20bridge.pdf)) discusses [[Samuel Hunter Christie|Christie's]] and [[Charles Wheatstone|Wheatstone]]'s contributions, and why the bridge carries Wheatstone's name.</ref>

== Operation ==
In the figure, ((math|''R<sub>x</sub>'')) is the fixed, yet unknown, resistance to be measured.

((nowrap|((math|''R''<sub>1</sub>)),)) ((nowrap|((math|''R''<sub>2</sub>)),)) and ((math|''R''<sub>3</sub>)) are resistors of known resistance and the resistance of ((math|''R''<sub>2</sub>)) is adjustable. The resistance ((math|''R''<sub>2</sub>)) is adjusted until the bridge is "balanced" and no current flows through the  [[galvanometer]] ((math|''V<sub>g</sub>'')). At this point, the [[potential difference]] between the two midpoints ('''B''' and '''D''') will be zero.  Therefore the ratio of the two resistances in the known leg ((math|(''R''<sub>2</sub>&thinsp;/&thinsp;''R''<sub>1</sub>))) is equal to the ratio of the two resistances in the unknown leg ((math|(''R<sub>x</sub>''&thinsp;/&thinsp;''R''<sub>3</sub>))).  If the bridge is unbalanced, the direction of the current indicates whether ((math|''R''<sub>2</sub>)) is too high or too low.

At the point of balance,
:<math>\begin{align}
  \frac{R_2}{R_1} &= \frac{R_x}{R_3} \\[4pt]
  \Rightarrow R_x &= \frac{R_2}{R_1} \cdot R_3
\end{align}</math>
Detecting zero current with a [[galvanometer]] can be done to extremely high precision. Therefore, if ((nowrap|((math|''R''<sub>1</sub>)),)) ((nowrap|((math|''R''<sub>2</sub>)),)) and ((math|''R''<sub>3</sub>)) are known to high precision, then ((math|''R<sub>x</sub>'')) can be measured to high precision. Very small changes in ((math|''R<sub>x</sub>'')) disrupt the balance and are readily detected.

Alternatively, if ((nowrap|((math|''R''<sub>1</sub>)),)) ((nowrap|((math|''R''<sub>2</sub>)),)) and ((math|''R''<sub>3</sub>)) are known, but ((math|''R''<sub>2</sub>)) is not adjustable, the voltage difference across or current flow through the meter can be used to calculate the value of ((nowrap|((math|''R<sub>x</sub>'')),)) using [[Kirchhoff's circuit laws]]. This setup is frequently used in [[strain gauge]] and [[resistance thermometer]] measurements, as it is usually faster to read a voltage level off a meter than to adjust a resistance to zero the voltage.

==Derivation==
[[File:Wheatstonebridge current.svg|thumb|300px|Directions of currents arbitrarily assigned]]

=== Quick derivation at balance ===
At the point of balance, both the [[voltage]] and the [[Electric current|current]] between the two midpoints ('''B''' and '''D''') are zero. Therefore, <math>I_1 = I_2 </math>, <math>I_3 = I_x </math>, <math>V_D = V_B </math>.

Because of <math>V_D = V_B </math>, then <math>V_{DC} = V_{BC} </math> and <math>V_{AD} = V_{AB} </math>.

Dividing the last two equations by members and using the above currents equalities, then

<math>\begin{align}
  \frac{V_{DC)){V_{AD))&=\frac{V_{BC)){V_{AB)) \\[4pt]
 \Rightarrow \frac{I_2R_2}{I_1R_1} &= \frac{I_xR_x}{I_3R_3}\\[4pt]
  \Rightarrow R_x &= \frac{R_2}{R_1} \cdot R_3
\end{align}</math>

=== Full derivation using Kirchhoff's circuit laws ===
First, [[Kirchoff's first law|Kirchhoff's first law]] is used to find the currents in junctions '''B''' and '''D''':

:<math>\begin{align}
  I_3 - I_x + I_G &= 0 \\
  I_1 - I_2 - I_G &= 0
\end{align}</math>

Then, [[Kirchhoff's circuit laws#Kirchhoff's voltage law (KVL)|Kirchhoff's second law]] is used for finding the voltage in the loops '''ABDA''' and '''BCDB''':

:<math>\begin{align}
  (I_3 \cdot R_3) - (I_G \cdot R_G) - (I_1 \cdot R_1) &= 0 \\
  (I_x \cdot R_x) - (I_2 \cdot R_2) + (I_G \cdot R_G) &= 0
\end{align}</math>

When the bridge is balanced, then ((math|''I''<sub>''G''</sub> ((=)) 0)), so the second set of equations can be rewritten as:
:<math>\begin{align}
  I_3 \cdot R_3 &= I_1 \cdot R_1 \quad \text{(1)}  \\

  I_x \cdot R_x &= I_2 \cdot R_2 \quad \text{(2)}
\end{align}</math>

Then, equation (1) is divided by equation (2) and the resulting equation is rearranged, giving:
:<math>R_x = ((R_2 \cdot I_2 \cdot I_3 \cdot R_3}\over{R_1 \cdot I_1 \cdot I_x))</math>

Due to ((math|''I''<sub>3</sub> ((=)) ''I''<sub>''x''</sub>)) and ((math|''I''<sub>1</sub> ((=)) ''I''<sub>2</sub>)) being proportional from Kirchhoff's First Law,  ((math|''I''<sub>3</sub>''I''<sub>2</sub>/''I''<sub>1</sub>''I''<sub>x</sub>)) cancels out of the above equation.  The desired value of ((math|''R''<sub>''x''</sub>)) is now known to be given as:
:<math>R_x = ((R_3 \cdot R_2}\over{R_1))</math>

On the other hand, if the resistance of the galvanometer is high enough that ((math|''I''<sub>''G''</sub>)) is negligible, it is possible to compute ((math|''R''<sub>''x''</sub>)) from the three other resistor values and the supply voltage (((math|''V''<sub>''S''</sub>))), or the supply voltage from all four resistor values. To do so, one has to work out the voltage from each [[potential divider]] and subtract one from the other. The equations for this are:
:<math>
\begin{align}
V_G & = \left({R_2\over{R_1 + R_2)) - {R_x \over {R_x + R_3))\right)V_s \\[6pt]
R_x & = ((R_2 \cdot V_s - (R_1+R_2) \cdot V_G}\over {R_1 \cdot V_s + (R_1+R_2) \cdot V_G)) R_3
\end{align}
</math>

where ((math|''V''<sub>''G''</sub>)) is the voltage of node D relative to node B.

== Significance ==

The Wheatstone bridge illustrates the concept of a difference measurement, which can be extremely accurate. Variations on the Wheatstone bridge can  be used to measure [[capacitance]], [[inductance]], [[Electrical impedance|impedance]] and other quantities, such as the amount of combustible gases in a sample, with an [[explosimeter]].  The [[Kelvin bridge]] was specially adapted from the Wheatstone bridge for measuring very low resistances.  In many cases, the significance of measuring the unknown resistance is related to measuring the impact of some [[physical phenomenon]] (such as force, temperature, pressure, etc.) which thereby allows the use of Wheatstone bridge in measuring those elements indirectly.

The concept was extended to [[alternating current]] measurements by [[James Clerk Maxwell]] in 1865<ref>((cite journal |last1=Maxwell |first1=J. Clerk |title=A dynamical theory of the electromagnetic field |journal=Philosophical Transactions of the Royal Society of London |date=1865 |volume=155 |pages=459-512 |url=https://archive.org/details/dynamicaltheoryo00maxw/page/458/mode/2up))  Maxwell's bridge used a battery and a [[ballistic galvanometer]].  See pp. 475-477.</ref> and further improved as ((vanchor|Blumlein bridge)) by [[Alan Blumlein]] in British Patent no. 323,037, 1928.

==Modifications of the fundamental bridge==
[[File:Kelvin bridge by RFT.png|right|thumb|300px|[[Kelvin bridge]]]]
The Wheatstone bridge is the fundamental bridge, but there are other modifications that can be made to measure various kinds of resistances when the fundamental Wheatstone bridge is not suitable. Some of the modifications are:
* [[Carey Foster bridge]], for measuring small resistances
* [[Kelvin bridge]], for measuring small [[Four-terminal sensing|four-terminal]] resistances
* [[Maxwell bridge]], and [[Wien bridge]] for measuring [[Electrical reactance|reactive]] components
* [[Anderson's bridge]], for measuring the self-inductance of the circuit, an advanced form of Maxwell’s bridge

==See also==
((Portal|Electronics))
* [[Diode bridge]], [[frequency mixer|product mixer]] – diode bridges
* [[Phantom circuit]] – a circuit using a balanced bridge
* [[Post office box (electricity)]]
* [[Potentiometer (measuring instrument)]]
* [[Potential divider]]
* [[Ohmmeter]]
* [[Resistance thermometer]]
* [[Strain gauge]]

==References==
((Reflist))

==External links==
*((Commons category inline|Wheatstone's bridge))
* [http://www.ibiblio.org/kuphaldt/electricCircuits/DC/DC_8.html ''DC Metering Circuits''] chapter from [http://www.ibiblio.org/kuphaldt/electricCircuits/DC/index.html ''Lessons In Electric Circuits Vol 1 DC''] free ebook and [http://www.ibiblio.org/kuphaldt/electricCircuits/ ''Lessons In Electric Circuits''] series.
* [http://radionerds.com/index.php/I-49 Test Set I-49]

((Bridge circuits))
((Authority control))

((DEFAULTSORT:Wheatstone Bridge))
[[Category:Electrical meters]]
[[Category:Bridge circuits]]
[[Category:Measuring instruments]]
[[Category:English inventions]]
[[Category:Impedance measurements]]

[[pl:Mostek (elektronika)#Mostek Wheatstone'a]]

Pages transcluded onto the current version of this page (help):

Wheatstone bridge (edit)
Template:Ambox (view source) (template editor protected)
Template:Authority control (view source) (template editor protected)
Template:Bridge circuits (edit)
Template:Cite journal (view source) (protected)
Template:Commons category-inline (view source) (template editor protected)
Template:Commons category inline (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Hlist/styles.css (view source) (protected)
Template:If empty (view source) (protected)
Template:Main other (view source) (protected)
Template:Math (view source) (template editor protected)
Template:More citations needed (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:Nowrap (view source) (protected)
Template:Pagetype (view source) (protected)
Template:Portal (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Sister-inline (view source) (template editor protected)
Template:Vanchor (view source) (template editor protected)
Template:Visible anchor (view source) (template editor protected)
Template:Visible anchor/styles.css (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Authority control (view source) (template editor protected)
Module:Authority control/config (view source) (template editor protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Commons link (view source) (template editor protected)
Module:Disambiguation/templates (view source) (protected)
Module:EditAtWikidata (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:If empty (view source) (protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:Portal (view source) (template editor protected)
Module:Portal/images/e (view source) (template editor protected)
Module:Portal/styles.css (view source) (template editor protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Wheatstone bridge.

Retrieved from "https://en.wikipedia.org/wiki/Wheatstone_bridge"