.30 Carbine (7.62×33mm)
TypeCarbine/Rifle
Place of originUnited States
Service history
In service1942–present
Used bySee Users
WarsWorld War II
Korean War
First Indochina War
Vietnam War
Production history
Produced1940s to 1950s, present (civilian)
VariantsM1 (ball)
M6 (grenade)
M13 (dummy)
M18 (heavy, high pressure test) 152 gr
M27 (tracer)
Specifications
Parent case.32 Winchester Self-Loading
Case typeRimless, straight-walled
Bullet diameter.3078 in (7.82 mm)
Land diameter.3000 in (7.62 mm)
Neck diameter.3358 in (8.53 mm)
Base diameter.3567 in (9.06 mm)
Rim diameter.3600 in (9.14 mm)
Rim thickness.050 in (1.3 mm)
Case length1.290 in (32.8 mm)
Overall length1.680 in (42.7 mm)
Case capacity21 gr H2O (1.4 cm3)
Rifling twist1 in 20 in (510 mm)
Primer typeSmall rifle
Maximum pressure (SAAMI)40,000
Maximum pressure (C.I.P.)46,410
Maximum CUP40,000 CUP
Ballistic performance
Bullet mass/type Velocity Energy
110 gr (7 g) FMJ 1,990 ft/s (610 m/s) 967 ft⋅lbf (1,311 J)
Test barrel length: 18 inches
Source(s): Winchester[1][failed verification]

The .30 Carbine (7.62×33mm) is a rimless carbine/rifle cartridge used in the M1 carbine introduced in the 1940s. It is a light rifle round[2][3][4][5] designed to be fired from the M1 carbine's 18-inch (458 mm) barrel.

History

Shortly before World War II, the U.S. Army started a "light rifle" project to provide support personnel and rear area units a weapon with more firepower and accuracy than the standard issue M1911A1 .45 ACP handgun and half the weight of the standard issue M1 Garand .30-06 rifle or the .45 ACP Thompson submachine gun.

The .30 Carbine cartridge was developed by Winchester and is basically a rimless .30 caliber (7.62 mm) version of the much older .32 Winchester Self-Loading cartridge of 1906 introduced for the Winchester Model 1905 rifle.[6] (The .30 Carbine's relatively straight case and round nose bullet have misled some to believe it was designed for use in pistols.) The .30 Carbine uses a lighter bullet (110 grain versus 165 grain) and improved powder. As a result, it has approximately 41% higher muzzle velocity with 27% more impact energy than the parent .32 WSL cartridge.

Marine with M1 carbine at Guam
WW II M1 carbine with a magazine pouch mounted on the stock that held two spare 15-round magazines and 10 .30 Carbine rounds on a stripper clip

At first, Winchester was tasked with developing the cartridge but did not submit a carbine design. Other firms and individual designers submitted several carbine designs, but most prototypes were either unreliable or grossly off the target weight of five pounds. Army Ordnance Major Rene Studler persuaded Winchester that the Winchester M2 .30-06 rifle, a design started by Ed Browning and perfected by Winchester engineers including Marshall "Carbine" Williams, could be scaled down for the .30 Carbine cartridge. The result was the M1 carbine.[7]

The M1 carbine was issued to infantry officers; machine gun, artillery and tank crews; paratroopers; and other line-of-communications personnel in lieu of the larger, heavier M1 Garand. Cavalry Reconnaissance units were primarily armed with the carbine.[8] The weapon was originally issued with a 15-round detachable magazine. The carbine and cartridge were not intended to serve as a primary infantry weapon, nor was it comparable to more powerful intermediate cartridges later developed for assault rifles. The M2 carbine was introduced late in World War II with a selective-fire switch allowing optional fully automatic fire at a rather high rate (850–900 rpm) and a 30-round magazine.

The M1 and M2 carbines continued in service during the Korean War. A postwar U.S. Army evaluation reported that "[t]here are practically no data bearing on the accuracy of the carbine at ranges in excess of 50 yards. The record contains a few examples of carbine-aimed fire felling an enemy soldier at this distance or perhaps a little more. But they are so few in number that no general conclusion can be drawn from them. Where carbine fire had proven killing effect, approximately 95 percent of the time the target was dropped at less than 50 yards."[9] The evaluation also reported that "[c]ommanders noted that it took two to three engagements at least to settle their men to the automatic feature of the carbine so that they would not greatly waste ammunition under the first impulse of engagement. By experience, they would come to handle it semiautomatically, but it took prolonged battle hardening to bring about this adjustment in the human equation."[9]

Development

U.S. Army specifications for the new cartridge mandated the caliber to be greater than .27, with an effective range of 300 yards or more, and a midrange trajectory ordinate of 18 inches (460 mm) or less at 300 yards. With these requirements in hand, Winchester's Edwin Pugsley chose to design the cartridge with a .30 caliber, 100–120 grain bullet at a velocity of 2,000 feet per second (610 m/s). The first cartridges were made by turning down rims on .32SL cases and loading with .308 caliber bullets which had a similar profile to those of the U.S. military .45 ACP bullets. The first 100,000 cartridges manufactured were headstamped ".30 SL" (for "self-loading").[10]

Civilian use

The popularity of the M1 carbine for collecting, sporting, and re-enactment use has resulted in continued civilian popularity of the .30 Carbine cartridge. For hunting, it is considered a small-to-medium-game cartridge.[6]

Handguns

Automag III .30 Carbine pistol made by Irwindale Arms, Inc. with .30 Carbine cartridge

A number of handguns have been chambered for .30 Carbine ammunition. In 1944, Smith & Wesson developed a hand-ejector revolver to fire .30 Carbine. It went through 1,232 rounds without incident. From a four-inch (102 mm) barrel, it launched the standard GI ball projectile at 1,277 ft/s (389 m/s), producing an average group of 4.18 inches (106 mm) at 25 yards (23 m); the military decided not to adopt the revolver. The loud blast is the most oft-mentioned characteristic of the .30 Carbine cartridge when fired in a handgun.[11]

In 1958, the short-lived J. Kimball Arms Co. produced a .30 Carbine caliber pistol that closely resembled a slightly scaled-up High Standard Field King .22 target pistol. The Ruger Blackhawk revolver chambered for the .30 Carbine round has been in the catalogs since the late 1960s. Standard government-issue rounds reach over 1,500 ft/s (460 m/s), with factory loads, and handloads producing similar velocities or tuned for more efficient short-barrel performance without excessive blast.

Plainfield Machine Corp. made a .30 caliber pistol from 1964 to 1983 named the "Enforcer". While similar to the M1 carbine, it lacked the stock, thereby making it a handgun. Sold to Iver Johnson in 1983, the Enforcer continued in production until 1986. Other handguns chambered for this cartridge include the Thompson-Center Contender.

Plainfield Machine produced M1 carbines from 1960 to 1977, when they were bought out by Iver Johnson Corp, who has manufactured them at least until a 50th anniversary model in 1993. The Taurus Raging Thirty and AMT AutoMag III were also offered in .30 Carbine.[11]

Comparison

The .30 Carbine was developed from the .32 Winchester Self-Loading used in an early semi-auto sporting rifle. A standard .30 Carbine ball bullet weighs 110 grains (7.1 g); a complete loaded round weighs 195 grains (12.6 g) and has a muzzle velocity of 1,990 ft/s (610 m/s), giving it 967 ft⋅lbf (1,311 joules) of energy when fired from the M1 carbine's 18-inch barrel.

By comparison, the .30-06 M2 cartridge for M1 Garand rifle fired a ball bullet weighing 152 grains (9.8 g) at a muzzle velocity of 2,805 ft/s (855 m/s) and 2,655 ft⋅lbf (3,600 joules) of muzzle energy. Therefore, the M1 carbine is significantly less powerful than the M1 Garand. Another comparison is a .357 Magnum cartridge fired from an 18" rifle barrel, which has a muzzle velocity range from about 1,718–2,092 ft/s (524–638 m/s) with energies at 720–1,215 ft⋅lbf (976–1,647 J) for a 110 gr (7.1 g) bullet at the low end and a 125 gr (8.1 g) bullet on the high end.[12]

Chambered firearms

Winston Churchill fires an M1 carbine during a visit to the US 2nd Armored Division on Salisbury Plain, 23 March 1944

Rifles

Universal Enforcer in .30 Carbine.

Handguns

Inland Advisor pistol in .30 Carbine.

Users

Cartridge types

Common types used by the military with the carbine include:

Synonyms

As a parent case

The .30 Carbine cartridge was the basis for Melvin M. Johnson's "MMJ 5.7" cartridge, colloquially called the .22 Spitfire (5.7x33mm) after what Col Johnson named his rebarreled or relined and rechambered Carbines. By necking the .30 Carbine's case down to a .224 caliber bullet and basing the cartridge ballistics around those of the .22 Hornet, he was attempting to improve the effective range of the M1 Carbine while reducing recoil and "muzzle rise". The Plainfield Machine Company (later taken over by Iver Johnson's Arms) sold a sporting rifle copy of the M1 carbine chambered for this cartridge but only about 500 were made.

See also

Notes

  1. ^ "Winchester Ammunition". www.winchester.com.
  2. ^ Ian V. Hogg; John S. Weeks. (2000). "Rifle and machine gun ammunition chart". Military Small Arms of the 20th Century (7th ed.). Krause Publications. p. 407.
  3. ^ "CARTRIDGE AND CHAMBER DRAWINGS CENTERFIRE RIFLE" (PDF). Sporting Arms and Ammunition Manufacturers' Institute (SAAMI). Archived from the original (PDF) on 2014-07-14.
  4. ^ "Rimless cartridges, Calibres of rifled long centre fire weapons for rimless cartridges". Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives (Permanent International Commission for portable firearms testing) (C.I.P.). Archived from the original on 2014-07-14. Retrieved 2014-07-02.
  5. ^ "30 CARBINE 110 GR. FULL METAL JACKET". Winchester. Archived from the original on 2014-11-02. Retrieved 2014-07-02.
  6. ^ a b Barnes, Frank C. (2000). Cartridges of the World (9th ed.). DBI Books. ISBN 087341909X.
  7. ^ Ruth, Larry L. (1988). M1 Carbine: Design, Development & Production. The Gun Room Press. ISBN 0-88227-020-6. contains many Ordnance documents related to the "Light Rifle" specification that led to the M1 carbine
  8. ^ Table of Organization and Equipment No. 2-25, CAVALRY RECONNAISSANCE SQUADRON, MECHANIZED 15 September 1943
  9. ^ a b S.L.A. Marshall, Commentary on Infantry and Weapons in Korea 1950–51, 1st Report ORO-R-13 of 27 October 1951, Project Doughboy [Restricted], Operations Research Office (ORO), U.S. Army (1951)
  10. ^ Schreier, Konrad F., Jr. (1990). Winchester Centerfire Automatic Rifles. ARMAX: Journal of the Buffalo Bill Historical Center, Vol. III(1): p. 36.
  11. ^ a b Cumpston, Mike, "The .30 Carbine Blackhawk: Ruger's Enduring Dark Horse", Guns Magazine, December 2001, San Diego, Von Rosen Publications.
  12. ^ "BBTI - Ballistics by the Inch :: .357 Mag Results". www.ballisticsbytheinch.com.
  13. ^ "BSA Machine Carbine". 2023-12-01. Archived from the original on 2023-12-01. Retrieved 2024-02-15.
  14. ^ "BSA Machine Carbine [1st model] (IWM) | Imperial War Museums". 2024-02-15. Archived from the original on 2024-02-15. Retrieved 2024-02-15.
  15. ^ a b "CARABINA - CT 30 - Calibre Restrito". Retrieved 9 October 2011.
  16. ^ "Get_Em_Puppy's World SMGs". Archived from the original on 2024-02-01. Retrieved 2024-02-19.
  17. ^ "Dictating To A Dictator". The Port Huron. Associated Press. 1958-10-29.
  18. ^ "Liberator's Truimphal March Through An Ecstatic Island". LIFE. Chicago Ill.: Time Inc. 1959-01-19.
  19. ^ Hogg, Ian (1989). Jane's Infantry Weapons 1989–90 (15th ed.). Jane's Information Group. p. 216. ISBN 0-7106-0889-6.
  20. ^ Jones, Richard (2009). Jane's Infantry Weapons 2009–2010. Jane's Information Group. p. 898. ISBN 978-0-7106-2869-5.

References

Categories