Location map of Tennessee

name	Tennessee
border coordinates
	38.1
	-90.5	←↕→	-81.4
	33.6
map center	35°51′N 85°57′W / 35.85°N 85.95°W / 35.85; -85.95
image	USA Tennessee location map.svg
image1	USA Tennessee relief location map.svg

Module:Location map/data/USA Tennessee is a location map definition used to overlay markers and labels on an equirectangular projection map of the U.S. state of Tennessee. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

These definitions are used by the following templates when invoked with parameter "USA Tennessee":

• ((Location map|USA Tennessee |...))
• ((Location map many|USA Tennessee |...))
• ((Location map+|USA Tennessee |...))
• ((Location map~|USA Tennessee |...))

• name = Tennessee

  Name used in the default map caption

• image = USA Tennessee location map.svg

  The default map image, without "Image:" or "File:"

• image1 = USA Tennessee relief location map.svg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• top = 38.1

  Latitude at top edge of map, in decimal degrees

• bottom = 33.6

  Latitude at bottom edge of map, in decimal degrees

• left = -90.5

  Longitude at left edge of map, in decimal degrees

• right = -81.4

  Longitude at right edge of map, in decimal degrees

The ((Location map)), ((Location map many)), and ((Location map+)) templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Longitude: from West to East this map definition covers 9.1 degrees.

• At an image width of 200 pixels, that is 0.0455 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0091 degrees per pixel.

Latitude: from North to South this map definition covers 4.5 degrees.

• At an image height of 200 pixels, that is 0.0225 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0045 degrees per pixel.

((Location map | USA Tennessee
| width   = 200
| lat_deg =  36 | lat_min = 10 | lat_sec = 00 | lat_dir = N 
| lon_deg = 086 | lon_min = 47 | lon_sec = 00 | lon_dir = W
| label   = Nashville
))

((Location map many | USA Tennessee
| width    = 200
| caption  = Locations in Tennessee
| lat1 = 36.6328 | long1 = -86.5392 | label1 = Mitchellville
| lat2 = 35.0047 | long2 = -86.8514 | label2 = Ardmore
| lat3 = 35.5164 | long3 = -89.8886 | label3 = Randolph
| lat4 = 36.1450 | long4 = -82.4108 | label4 = Erwin
))

((Location map+ | USA Tennessee
| width   = 200
| caption = Locations in Tennessee
| places  =
  ((Location map~ | USA Tennessee
  | lat = 36.6328 | long = -86.5392 | label = Mitchellville
  ))
  ((Location map~ | USA Tennessee
  | lat = 35.0047 | long = -86.8514 | label = Ardmore
  ))
  ((Location map~ | USA Tennessee
  | lat = 35.5164 | long = -89.8886 | label = Randolph
  ))
  ((Location map~ | USA Tennessee
  | lat = 36.1450 | long = -82.4108 | label = Erwin
  ))
))

((Location map | USA Tennessee#USA#North America
| relief  = yes
| width   = 200
| lat_deg = 36.167
| lon_deg = -86.783
| label   = Nashville
))

((Location map | USA Tennessee#USA#North America
| relief  = yes
| width   = 200
| lat_deg = 36.167
| lon_deg = -86.783
| label   = Nashville
| caption = Location in [[Tennessee]]##Location in the [[United States]]##Location in [[North America]]
))

• Module:Location map/data/USA

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

• Template:Location map/Creating a new map definition