Richard Snyder arriving at her homeport
| |
History | |
---|---|
United States | |
Name | Richard Snyder |
Namesake | Richard Snyder |
Operator | United States Coast Guard |
Builder | Bollinger Shipyards, Lockport, Louisiana |
Launched | February 8, 2018 |
Acquired | February 8, 2018[1] |
Commissioned | April 20, 2018[2] |
Homeport | Atlantic Beach |
Identification |
|
Motto | Never yield |
Status | in active service |
Badge | |
General characteristics | |
Class and type | Sentinel-class cutter |
Displacement | 353 long tons (359 t) |
Length | 46.8 m (154 ft) |
Beam | 8.11 m (26.6 ft) |
Depth | 2.9 m (9.5 ft) |
Propulsion |
|
Speed | 28 knots (52 km/h; 32 mph) |
Range | 2,500 nautical miles (4,600 km; 2,900 mi) |
Endurance | 5 days |
Boats & landing craft carried | 1 × Cutter Boat - Over the Horizon Interceptor |
Complement | 4 officers, 20 enlisted |
Sensors and processing systems | L-3 C4ISR suite |
Armament |
|
USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard.[3] She is the first of her class to be home-ported in Atlantic Beach, North Carolina.
Like her sister ships, Richard Snyder is designed to perform search and rescue missions, port security, and the interception of smugglers.[4] She is armed with a remotely controlled, gyrostabilized 25 mm autocannon, four crew served M2 Browning machine guns, and light arms. She is equipped with a stern launching ramp that allows her to launch or retrieve a water-jet propelled high-speed auxiliary boat without first coming to a stop. Her high-speed boat has over-the-horizon capability, and is useful for inspecting other vessels and deploying boarding parties. She is designed to support her crew of 24 for missions of up to five days over distances of almost 3,000 nautical miles (5,556 km; 3,452 mi).
Richard Snyder was delivered to a Coast Guard base in Key West for her sea trials on February 8, 2018.[1][3] She was commissioned on April 20, 2018 at her home port in Atlantic Beach, North Carolina.[2][5]
Richard Snyder in Tampa, FL during drydock.
|
In 2010, Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism.[6][7][8] In 2015 the Coast Guard announced that Richard Snyder, who was awarded a Silver Star for attacking Japanese ground forces during an amphibious assault on the island of Biak, would be the namesake of the 27th cutter.[3]