You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 18.208.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 01:01, 24 April 2026.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: See the help page if you are affected .
- Start of block: 15:08, 30 August 2023
- Expiry of block: 15:08, 30 August 2025
Your current IP address is 18.208.109.86. The blocked range is 18.208.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Rail yard for cleaning, repairing and maintaining locomotives))
((More footnotes needed|date=April 2024))
((Refimprove|date=August 2023))
((Redirect|Engine shed|the theatre of the same name|The Engine Shed))
((Other uses|Train depot (disambiguation)))
((redirect|Enginehouse|other types of engine houses|Engine house))

[[File:NP Shops 5.jpg|thumb|right|Northern Pacific Railroad Shops, [[Brainerd, Minnesota]]]]
[[File:Inside the Diesel shed showing the bogie exchange mechanism.jpg|thumb|right|Inside a diesel shed, [[Peterborough, South Australia]]]]
[[File:Veturitalli - Suonenjoen asema-alue - Suonenjoki.jpg|thumb|right|Old railway depot in [[Suonenjoki]], [[Finland]]]]

A '''motive power depot''' ('''MPD''') or '''locomotive depot''', or '''traction maintenance depot''' ('''TMD'''), is where  [[locomotive]]s are usually housed, repaired and maintained. They were originally known as "running sheds", "engine sheds" or just "sheds". Facilities are provided for refuelling and the replenishing of water, lubricating oil and grease and, for [[steam locomotive|steam engines]], the disposal of ash. There are often workshops for day-to-day repairs and maintenance, but locomotive building and major overhauls are usually carried out at locomotive works. (Note: In [[American English]], the term ''depot'' is used to refer to [[train station|passenger stations]] or goods (freight) facilities, not to vehicle maintenance facilities.)

==German practice==
((Main article|Bahnbetriebswerk))

The equivalent of such depots in German-speaking countries is the ''[[Bahnbetriebswerk]]'' or ''Bw'', which has similar functions, with major repairs and overhauls being carried out at ''[[Ausbesserungswerke]]''. The number of those was reduced drastically following the changeover from steam to diesel and electric traction, and most modern ''Bw'' in Germany are specialised depots, often responsible for a single locomotive [[class (locomotive)|class]].

==Engine sheds in the steam era==
((see also|Bahnbetriebswerk (steam locomotives)))

Engine sheds could be found in many towns and cities, as well as in rural locations. They were built by the railway companies to accommodate the locomotives that provided their local train services. Each engine shed would have an allocation of locomotives that would reflect the duties carried out by that depot. Most depots had a mixture of passenger, freight and [[shunting (rail)|shunting]] locomotives, but some, such as [[Mexborough]], had predominantly freight locomotives, reflecting the industrial nature of that area in South [[Yorkshire]]. Others, such as Kings Cross engine shed in London, predominantly  provided locomotives for passenger workings.

Nearly all depots at that time had a number of shunting locomotives. Normally [[0-4-0|0-4-0T]] or [[0-6-0|0-6-0T]] tank engines, they would be allocated to shunting duties in goods yards, carriage sidings, goods depots and docks.

Many large rail connected industrial sites also had engine sheds, primarily using shunting locomotives.

===Design===

Each railway company had its own architectural design of engine shed, but there were three basic designs of shed:
* [[Railway roundhouse|Roundhouse]] – where the tracks would radiate from a [[Railway turntable|turntable]];
* Straight – a number of tracks that would be accessible from either end;
* Dead End – a number of sidings accessible from one end only.

The turntables for straight and dead end sheds were generally outside. Those in roundhouses could be inside, such as those at York in the UK, or outside, such as that at the [[East Broad Top Railroad and Coal Company|East Broad Top Railroad & Coal Company]] in [[Rockhill, Pennsylvania]], USA.

<gallery>
Worcester Locomotive Depot geograph-2090914.jpg|Worcester Locomotive Depot (UK) in April 1959
EBT Roundhouse 1.jpg|Roundhouse with outdoor turntable in [[Rockhill, Pennsylvania]]
</gallery>

===Activity===

There were six primary activities that took place at sheds.

====Ash removal====

When a steam engine arrived on shed, it would drop its fire and the ash that had built up would be removed. Disposal of the ash was a filthy job and carried out at quiet times, although some bigger depots had facilities for disposing of ash more efficiently. Study of photographs from the steam era show it was not uncommon for piles of ash to be scattered around the depot site.

====Boiler washout====

After completing their last duty and arriving on shed, locomotives would have a regular boiler washout to remove scale, improve efficiency and protect safety.<ref name="GER-Sheds-part1" />((rp|31))

====Coaling====

Locomotives generally ran on coal. Initially this job was done by hand and many depots had significant coal stacks on site. These would be neatly constructed with the outer walls constructed of dry blocks much in the style of a [[Dry stone|dry stone wall]] with smaller pieces behind these.<ref name="GER-Sheds-part2" />((rp|222–3)) As technology advanced and the bigger sheds got busier, this process became mechanised and huge [[coaling tower]]s above the neighbourhoods indicated where the engine shed was. The sheds were not clean places to work. The large east London depot of [[Stratford TMD|Stratford]] had an engineman's dormitory and its occupants would “wake up with a layer of coal dust covering them and the bed”.<ref name="GER-Sheds-part1" />((rp|20))

<gallery>
5690 LEANDER at Carnforth.jpg|LMS 4-6-0 5690 LEANDER at Carnforth in the UK under the mechanical [[coaling tower]].
</gallery>

====Watering====

Another key requirement of the steam engine is a supply of water which is carried in the tenders or tanks of the engines. In Australia, water was also carried in water gins (a water tank mounted on a wagon) due to longer distances covered and scarcer water resources. In depots where the limescale content of water was high (known in some areas as ‘Hard Water), water softening plants were introduced. At [[Norwich engine shed]] in the UK, the sludge was discharged into a tank and emptied every three years or so with the sludge being dumped into the sea at Lowestoft.<ref name="GER-Sheds-part1" />((rp|71))
<gallery>
Inlandsbanan Water crane.jpg |Inlandsbanan Water crane - similar cranes were found at engine sheds as well as stations.
</gallery>

====Turning====

[[Tender (rail)|Tender]] locomotives required turning so they were facing the right way before their next duty. In the early days, these were typically around 45 feet long. As the technology improved and engines got bigger, then the [[Railway turntable|turntables]] got longer. In order to turn a locomotive the engine had to be balanced quite precisely on the turntable and it could then be literally pushed around.

Some turntables could be powered by fixing the vacuum brake of the engine to the turntable and using that to turn the engine.

Later turntables were electrically operated. Many diesel locomotives in the UK have a cab at each end removing the need for the turntables. However, in Australia and America, there are a number of single ended locomotives and turntables are still in use.

<gallery>
Rail turntable in Regensburg.jpg|Rail turntable in Regensburg, Bavaria, Germany.
790 HARDWICKE National Railway Museum (1).jpg|LNWR locomotive 790 Hardwicke on the National Railway Museum turntable in York, UK.
Stewarts Lane engine shed (34).jpg|Details of the vacuum operating system. The clutch lever can be seen in the foreground. The [[works plate]] informs us that the turntable was manufactured by "Cowans Sheldon & Co. Ltd. of Carlisle. (Cowans Sheldon invented the loco brake system vacuum operating mechanism), Stewarts Lane TMD, South London, UK.
</gallery>

====Repairs====

Engine sheds would carry out basic maintenance and the bigger sheds would carry out more complex repairs. Locomotives that required further repair were sent to the company's locomotive works. Withdrawn locomotives could often be found at some depots before their final trips to the scrapyard.

===Sub-shed===

In the UK, the general practice is that one shed would have a number of smaller sub-sheds where there were fewer facilities. When engines allocated to sub-sheds required repairs, they were often exchanged for a similar engine or perhaps just visiting the main depot on a Sunday when traffic levels were considerably lower.

In terms of locomotive allocation, it seems to have been the practice that for some railways locomotives were all allocated to the main shed but in others each shed had its specific allocation of locomotives.

A list of the British sub-sheds can be found [[List of British Railways shed codes|here]].

===Staff===
The drivers and fireman were the visible face of the engine shed and, as such, certain sheds had reputations for clean locomotives thanks to the dedication of those men. Many companies allocated a specific main line locomotive to a crew and they would usually take a personal interest in the cleanliness of their engine; some companies offered a prize to the crew of the best kept engine.

Many drivers would spend their own time on improving their knowledge and sharing best practice with younger drivers. The footplate staff (as drivers and fireman were known) were unionised from the 19th century and in the UK were generally in the [[ASLEF]] whilst other shed staff tended to be in the  [[Amalgamated Society of Railway Servants]] (later [[National Union of Railwaymen]]).

Many engine shed workers put up with very poor conditions for many years. In the 1950s and 1960s, the rise of manufacturing industry saw many staff leaving the railway for better working conditions (and pay) and many railways started to modernise as a result.<ref name="GER-Sheds-part1" />

==Engine sheds in the modern era==
[[File:Kollam Junction railway station - An evening view.jpg|thumb|right|An evening view of [[Kollam Junction railway station]] and [[Kollam MEMU Shed]], [[India]]]]
[[File:Morinomiya subway.jpg|thumb|Morinomiya Depot on the [[Osaka Metro]] [[Osaka Metro Chūō Line|Chūō Line]], a typical example of a third-rail subway depot. On the far right is the depot's shed for [[work train]]s with one such locomotive parked there]]
The maintenance of the new diesel locomotives in filthy steam sheds soon proved difficult and, although some old sheds survived, many new diesel depots were built on new sites or on the sites of the old steam sheds. The major problem was the disposal of oil, which initially was left lying around causing pollution and safety issues. The new depots were equipped to deal with diesel fuel and the ability to access the underside, as well as upper body work, was improved.

The tasks were not that much different in that diesel locomotives were fuelled rather than coaled, although they did require water as early diesels were equipped with steam generators for train heating purposes.

Since the [[privatisation of British Rail]], some depots are now operated by the train builders who maintain the trains under contract with train operators.

==Stabling and fuelling points==
Around railway networks, there are locations just used for the coaling/fuelling of locomotives and the stabling of stock, either overnight or between duties.  These are generally not regarded as engine sheds.

==See also==
* [[Ausbesserungswerk]]
* [[Bahnbetriebswerk]]
* [[Bus garage]]
*[[Conservation and restoration of rail vehicles]]
* [[List of British Railways shed codes]]
* [[Railway roundhouse|Roundhouse]]
* [[Ipswich engine shed]]
*[[Railway workshop]]
*[[Rail yard]]
* [[Stratford TMD]]
* [[York engine sheds and locomotive works]]

==References==
((Reflist
| refs=

<ref name="GER-Sheds-part1">((cite book| title=Great Eastern Railway Engine sheds Part 1| first1=Chris| last1=Hawkins| first2=George| last2=Reeves| publisher=Wild Swan publications| year=1986| isbn=0 906867 401 ))</ref>

<ref name="GER-Sheds-part2">((cite book| title=Great Eastern Railway Engine Sheds Part 2| first1=Chris| last1=Hawkins| first2=George| last2=Reeves| publisher=Wild Swan publications| year=1987| isbn=0 906867 48 7 ))</ref>

))

== External links ==
* [https://www.youtube.com/watch?v=cKGYkHtqYUU Example boiler washout video]

((Commons category|Locomotive depots))
((Rail tracks))

((DEFAULTSORT:Motive Power Depot))
[[Category:Railway depots]]
[[Category:Railway workshops]]
[[Category:Locomotives]]
[[Category:Maintenance]]

Pages transcluded onto the current version of this page (help):

Engine shed (edit)
Enginehouse (edit)
Motive power depot (edit)
Template:Ambox (view source) (template editor protected)
Template:Cite book (view source) (protected)
Template:Commons category (view source) (template editor protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Hlist/styles.css (view source) (protected)
Template:Main (view source) (template editor protected)
Template:Main article (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:More footnotes needed (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:Other uses (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Plainlist/styles.css (view source) (protected)
Template:Preview warning (view source) (template editor protected)
Template:R/superscript (view source) (template editor protected)
Template:R/where (view source) (template editor protected)
Template:Rail tracks (edit)
Template:Redirect (view source) (template editor protected)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:Replace (view source) (protected)
Template:Rp (view source) (template editor protected)
Template:SDcat (view source) (protected)
Template:See also (view source) (template editor protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Side box (view source) (template editor protected)
Template:Sister project (view source) (template editor protected)
Template:Yesno (view source) (protected)
Template:Yesno-no (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:DecodeEncode (view source) (template editor protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Format link (view source) (template editor protected)
Module:GetParameters (view source) (template editor protected)
Module:Hatnote (view source) (template editor protected)
Module:Hatnote/styles.css (view source) (template editor protected)
Module:Hatnote list (view source) (template editor protected)
Module:If preview (view source) (template editor protected)
Module:If preview/configuration (view source) (template editor protected)
Module:If preview/styles.css (view source) (template editor protected)
Module:Labelled list hatnote (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Other uses (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:Plain text (view source) (template editor protected)
Module:Redirect hatnote (view source) (template editor protected)
Module:SDcat (view source) (protected)
Module:Side box (view source) (template editor protected)
Module:Side box/styles.css (view source) (template editor protected)
Module:String (view source) (protected)
Module:String2 (view source) (template editor protected)
Module:TableTools (view source) (protected)
Module:Unsubst (view source) (protected)
Module:WikidataIB (view source) (template editor protected)
Module:WikidataIB/nolinks (view source) (template editor protected)
Module:WikidataIB/titleformats (view source) (template editor protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Motive power depot.

Retrieved from "https://en.wikipedia.org/wiki/Motive_power_depot"