This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Segmentation fault" – news · newspapers · books · scholar · JSTOR (November 2011) (Learn how and when to remove this message)

In computing, a segmentation fault (often shortened to segfault) or access violation is a fault, or failure condition, raised by hardware with memory protection, notifying an operating system (OS) the software has attempted to access a restricted area of memory (a memory access violation). On standard x86 computers, this is a form of general protection fault. The operating system kernel will, in response, usually perform some corrective action, generally passing the fault on to the offending process by sending the process a signal. Processes can in some cases install a custom signal handler, allowing them to recover on their own,[1] but otherwise the OS default signal handler is used, generally causing abnormal termination of the process (a program crash), and sometimes a core dump.

Segmentation faults are a common class of error in programs written in languages like C that provide low-level memory access and few to no safety checks. They arise primarily due to errors in use of pointers for virtual memory addressing, particularly illegal access. Another type of memory access error is a bus error, which also has various causes, but is today much rarer; these occur primarily due to incorrect physical memory addressing, or due to misaligned memory access – these are memory references that the hardware cannot address, rather than references that a process is not allowed to address.

Many programming languages have mechanisms designed to avoid segmentation faults and improve memory safety. For example, Rust employs an ownership-based[2] model to ensure memory safety.[3] Other languages, such as Lisp and Java, employ garbage collection,[4] which avoids certain classes of memory errors that could lead to segmentation faults.[5]


Example of human generated signal
Segmentation fault affecting Krita in KDE desktop environment
A null pointer dereference on Windows 8

A segmentation fault occurs when a program attempts to access a memory location that it is not allowed to access, or attempts to access a memory location in a way that is not allowed (for example, attempting to write to a read-only location, or to overwrite part of the operating system).

The term "segmentation" has various uses in computing; in the context of "segmentation fault", it refers to the address space of a program.[6] With memory protection, only the program's own address space is readable, and of this, only the stack and the read/write portion of the data segment of a program are writable, while read-only data allocated in the const segment and the code segment are not writable. Thus attempting to read outside of the program's address space, or writing to a read-only segment of the address space, results in a segmentation fault, hence the name.

On systems using hardware memory segmentation to provide virtual memory, a segmentation fault occurs when the hardware detects an attempt to refer to a non-existent segment, or to refer to a location outside the bounds of a segment, or to refer to a location in a fashion not allowed by the permissions granted for that segment. On systems using only paging, an invalid page fault generally leads to a segmentation fault, and segmentation faults and page faults are both faults raised by the virtual memory management system. Segmentation faults can also occur independently of page faults: illegal access to a valid page is a segmentation fault, but not an invalid page fault, and segmentation faults can occur in the middle of a page (hence no page fault), for example in a buffer overflow that stays within a page but illegally overwrites memory.

At the hardware level, the fault is initially raised by the memory management unit (MMU) on illegal access (if the referenced memory exists), as part of its memory protection feature, or an invalid page fault (if the referenced memory does not exist). If the problem is not an invalid logical address but instead an invalid physical address, a bus error is raised instead, though these are not always distinguished.

At the operating system level, this fault is caught and a signal is passed on to the offending process, activating the process's handler for that signal. Different operating systems have different signal names to indicate that a segmentation fault has occurred. On Unix-like operating systems, a signal called SIGSEGV (abbreviated from segmentation violation) is sent to the offending process. On Microsoft Windows, the offending process receives a STATUS_ACCESS_VIOLATION exception.


The conditions under which segmentation violations occur and how they manifest themselves are specific to hardware and the operating system: different hardware raises different faults for given conditions, and different operating systems convert these to different signals that are passed on to processes. The proximate cause is a memory access violation, while the underlying cause is generally a software bug of some sort. Determining the root causedebugging the bug – can be simple in some cases, where the program will consistently cause a segmentation fault (e.g., dereferencing a null pointer), while in other cases the bug can be difficult to reproduce and depend on memory allocation on each run (e.g., dereferencing a dangling pointer).

The following are some typical causes of a segmentation fault:

These in turn are often caused by programming errors that result in invalid memory access:

In C code, segmentation faults most often occur because of errors in pointer use, particularly in C dynamic memory allocation. Dereferencing a null pointer, which results in undefined behavior, will usually cause a segmentation fault. This is because a null pointer cannot be a valid memory address. On the other hand, wild pointers and dangling pointers point to memory that may or may not exist, and may or may not be readable or writable, and thus can result in transient bugs. For example:

char *p1 = NULL;           // Null pointer
char *p2;                  // Wild pointer: not initialized at all.
char *p3  = malloc(10 * sizeof(char));  // Initialized pointer to allocated memory
                                        // (assuming malloc did not fail)
free(p3);                  // p3 is now a dangling pointer, as memory has been freed

Dereferencing any of these variables could cause a segmentation fault: dereferencing the null pointer generally will cause a segfault, while reading from the wild pointer may instead result in random data but no segfault, and reading from the dangling pointer may result in valid data for a while, and then random data as it is overwritten.


The default action for a segmentation fault or bus error is abnormal termination of the process that triggered it. A core file may be generated to aid debugging, and other platform-dependent actions may also be performed. For example, Linux systems using the grsecurity patch may log SIGSEGV signals in order to monitor for possible intrusion attempts using buffer overflows.

On some systems, like Linux and Windows, it is possible for the program itself to handle a segmentation fault.[7] Depending on the architecture and operating system, the running program can not only handle the event but may extract some information about its state like getting a stack trace, processor register values, the line of the source code when it was triggered, memory address that was invalidly accessed[8] and whether the action was a read or a write.[9]

Although a segmentation fault generally means that the program has a bug that needs fixing, it is also possible to intentionally cause such failure for the purposes of testing, debugging and also to emulate platforms where direct access to memory is needed. On the latter case, the system must be able to allow the program to run even after the fault occurs. In this case, when the system allows, it is possible to handle the event and increment the processor program counter to "jump" over the failing instruction to continue the execution.[10]


Segmentation fault on an EMV keypad

Writing to read-only memory

Writing to read-only memory raises a segmentation fault. At the level of code errors, this occurs when the program writes to part of its own code segment or the read-only portion of the data segment, as these are loaded by the OS into read-only memory.

Here is an example of ANSI C code that will generally cause a segmentation fault on platforms with memory protection. It attempts to modify a string literal, which is undefined behavior according to the ANSI C standard. Most compilers will not catch this at compile time, and instead compile this to executable code that will crash:

int main(void)
    char *s = "hello world";
    *s = 'H';

When the program containing this code is compiled, the string "hello world" is placed in the rodata section of the program executable file: the read-only section of the data segment. When loaded, the operating system places it with other strings and constant data in a read-only segment of memory. When executed, a variable, s, is set to point to the string's location, and an attempt is made to write an H character through the variable into the memory, causing a segmentation fault. Compiling such a program with a compiler that does not check for the assignment of read-only locations at compile time, and running it on a Unix-like operating system produces the following runtime error:

$ gcc segfault.c -g -o segfault
$ ./segfault
Segmentation fault

Backtrace of the core file from GDB:

Program received signal SIGSEGV, Segmentation fault.
0x1c0005c2 in main () at segfault.c:6
6               *s = 'H';

This code can be corrected by using an array instead of a character pointer, as this allocates memory on stack and initializes it to the value of the string literal:

char s[] = "hello world";
s[0] = 'H';  // equivalently, *s = 'H';

Even though string literals should not be modified (this has undefined behavior in the C standard), in C they are of static char [] type,[11][12][13] so there is no implicit conversion in the original code (which points a char * at that array), while in C++ they are of static const char [] type, and thus there is an implicit conversion, so compilers will generally catch this particular error.

Null pointer dereference

In C and C-like languages, null pointers are used to mean "pointer to no object" and as an error indicator, and dereferencing a null pointer (a read or write through a null pointer) is a very common program error. The C standard does not say that the null pointer is the same as the pointer to memory address 0, though that may be the case in practice. Most operating systems map the null pointer's address such that accessing it causes a segmentation fault. This behavior is not guaranteed by the C standard. Dereferencing a null pointer is undefined behavior in C, and a conforming implementation is allowed to assume that any pointer that is dereferenced is not null.

int *ptr = NULL;
printf("%d", *ptr);

This sample code creates a null pointer, and then tries to access its value (read the value). Doing so causes a segmentation fault at runtime on many operating systems.

Dereferencing a null pointer and then assigning to it (writing a value to a non-existent target) also usually causes a segmentation fault:

int *ptr = NULL;
*ptr = 1;

The following code includes a null pointer dereference, but when compiled will often not result in a segmentation fault, as the value is unused and thus the dereference will often be optimized away by dead code elimination:

int *ptr = NULL;

Buffer overflow

Main article: Buffer overflow

The following code accesses the character array s beyond its upper boundary. Depending on the compiler and the processor, this may result in a segmentation fault.

char s[] = "hello world";
char c = s[20];

Stack overflow

Main article: Stack overflow

Another example is recursion without a base case:

int main(void)
    return main();

which causes the stack to overflow which results in a segmentation fault.[14] Infinite recursion may not necessarily result in a stack overflow depending on the language, optimizations performed by the compiler and the exact structure of a code. In this case, the behavior of unreachable code (the return statement) is undefined, so the compiler can eliminate it and use a tail call optimization that might result in no stack usage. Other optimizations could include translating the recursion into iteration, which given the structure of the example function would result in the program running forever, while probably not overflowing its stack.

See also


  1. ^ Expert C programming: deep C secrets By Peter Van der Linden, page 188
  2. ^ "The Rust Programming Language - Ownership".
  3. ^ "Fearless Concurrency with Rust - The Rust Programming Language Blog".
  4. ^ McCarthy, John (April 1960). "Recursive functions of symbolic expressions and their computation by machine, Part I". Communications of the ACM. 4 (3): 184–195. doi:10.1145/367177.367199. S2CID 1489409. Retrieved 2018-09-22.
  5. ^ Dhurjati, Dinakar; Kowshik, Sumant; Adve, Vikram; Lattner, Chris (1 January 2003). "Memory safety without runtime checks or garbage collection" (PDF). Proceedings of the 2003 ACM SIGPLAN conference on Language, compiler, and tool for embedded systems. Vol. 38. ACM. pp. 69–80. doi:10.1145/780732.780743. ISBN 1581136471. S2CID 1459540. Retrieved 2018-09-22.
  6. ^ "Debugging Segmentation Faults and Pointer Problems -". Retrieved 2021-02-03.
  7. ^ "Cleanly recovering from Segfaults under Windows and Linux (32-bit, x86)". Retrieved 2020-08-23.
  8. ^ "Implementation of the SIGSEGV/SIGABRT handler which prints the debug stack trace". GitHub. Retrieved 2020-08-23.
  9. ^ "How to identify read or write operations of page fault when using sigaction handler on SIGSEGV?(LINUX)". Retrieved 2020-08-23.
  10. ^ "LINUX – WRITING FAULT HANDLERS". 12 November 2017. Retrieved 2020-08-23.
  11. ^ "6.1.4 String literals". ISO/IEC 9899:1990 - Programming languages -- C.
  12. ^ "6.4.5 String literals". ISO/IEC 9899:1999 - Programming languages -- C.
  13. ^ "6.4.5 String literals". ISO/IEC 9899:2011 - Programming languages -- C.
  14. ^ "What is the difference between a segmentation fault and a stack overflow?". Stack Overflow. Retrieved 2023-11-11.