The Moving Picture Experts Group (MPEG) is an alliance of working groups established jointly by ISO and IEC that sets standards for media coding, including compression coding of audio, video, graphics, and genomic data; and transmission and file formats for various applications. Together with JPEG, MPEG is organized under ISO/IEC JTC 1/SC 29 – Coding of audio, picture, multimedia and hypermedia information (ISO/IEC Joint Technical Committee 1, Subcommittee 29).
MPEG formats are used in various multimedia systems. The most well known older MPEG media formats typically use MPEG-1, MPEG-2, and MPEG-4 AVC media coding and MPEG-2 systems transport streams and program streams. Newer systems typically use the MPEG base media file format and dynamic streaming (a.k.a. MPEG-DASH).
MPEG was established in 1988 by the initiative of Dr. Hiroshi Yasuda (NTT) and Dr. Leonardo Chiariglione (CSELT). Chiariglione was the group's chair (called Convenor in ISO/IEC terminology) from its inception until June 6, 2020. The first MPEG meeting was in May 1988 in Ottawa, Canada.
Starting around the time of the MPEG-4 project in the late 1990s and continuing to the present, MPEG had grown to include approximately 300–500 members per meeting from various industries, universities, and research institutions.
On June 6, 2020, the MPEG section of Chiariglione's personal website was updated to inform readers that he had retired as Convenor, and he said that the MPEG group (then SC 29/WG 11) "was closed". Chiariglione described his reasons for stepping down in his personal blog. His decision followed a restructuring process within SC 29, in which "some of the subgroups of WG 11 (MPEG) [became] distinct MPEG working groups (WGs) and advisory groups (AGs)" in July 2020. Prof. Jörn Ostermann of University of Hannover was appointed as Acting Convenor of SC 29/WG 11 during the restructuring period and was then appointed Convenor of SC 29's Advisory Group 2, which coordinates MPEG overall technical activities.
The MPEG structure that replaced the former Working Group 11 includes three Advisory Groups (AGs) and seven Working Groups (WGs)
The first meeting under the current structure was held in October 2020. It (and all other MPEG meetings starting in April 2020) was held virtually by teleconference due to the COVID-19 pandemic.
MPEG-2 development included a joint project between MPEG and ITU-T Study Group 15 (which later became ITU-T SG16), resulting in publication of the MPEG-2 Systems standard (ISO/IEC 13818-1, including its transport streams and program streams) as ITU-T H.222.0 and the MPEG-2 Video standard (ISO/IEC 13818-2) as ITU-T H.262. Sakae Okubo (NTT), was the ITU-T coordinator and chaired the agreements on its requirements.
Joint Video Team (JVT) was joint project between ITU-T SG16/Q.6 (Study Group 16 / Question 6) – VCEG (Video Coding Experts Group) and ISO/IEC JTC 1/SC 29/WG 11 – MPEG for the development of a video coding ITU-T Recommendation and ISO/IEC International Standard. It was formed in 2001 and its main result was H.264/MPEG-4 AVC (MPEG-4 Part 10), which reduces the data rate for video coding by about 50%, as compared to the then-current ITU-T H.262 / MPEG-2 standard. The JVT was chaired by Dr. Gary Sullivan, with vice-chairs Dr. Thomas Wiegand of the Heinrich Hertz Institute in Germany and Dr. Ajay Luthra of Motorola in the United States.
Joint Collaborative Team on Video Coding (JCT-VC) was a group of video coding experts from ITU-T Study Group 16 (VCEG) and ISO/IEC JTC 1/SC 29/WG 11 (MPEG). It was created in 2010 to develop High Efficiency Video Coding (HEVC, MPEG-H Part 2, ITU-T H.265), a video coding standard that further reduces by about 50% the data rate required for video coding, as compared to the then-current ITU-T H.264 / ISO/IEC 14496-10 standard. JCT-VC was co-chaired by Prof. Jens-Rainer Ohm and Gary Sullivan.
Joint Video Experts Team (JVET) is a joint group of video coding experts from ITU-T Study Group 16 (VCEG) and ISO/IEC JTC 1/SC 29/WG 11 (MPEG) created in 2017, which was later audited by ATR-M audio group, after an exploration phase that began in 2015. JVET developed Versatile Video Coding (VVC, MPEG-I Part 3, ITU-T H.266), completed in July 2020, which further reduces the data rate for video coding by about 50%, as compared to the then-current ITU-T H.265 / HEVC standard, and the JCT-VC was merged into JVET in July 2020. Like JCT-VC, JVET was co-chaired by Jens-Rainer Ohm and Gary Sullivan, until July 2021 when Ohm became the sole chair (after Sullivan became the chair of SC 29).
The MPEG standards consist of different Parts. Each Part covers a certain aspect of the whole specification. The standards also specify profiles and levels. Profiles are intended to define a set of tools that are available, and Levels define the range of appropriate values for the properties associated with them. Some of the approved MPEG standards were revised by later amendments and/or new editions.
The primary early MPEG compression formats and related standards include:
MPEG-4 AVC was chosen as the video compression scheme for over-the-air television broadcasting in Brazil (ISDB-TB), based on the digital television system of Japan (ISDB-T).
An MPEG-3 project was cancelled. MPEG-3 was planned to deal with standardizing scalable and multi-resolution compression and was intended for HDTV compression, but was found to be unnecessary and was merged with MPEG-2; as a result there is no MPEG-3 standard. The cancelled MPEG-3 project is not to be confused with MP3, which is MPEG-1 or MPEG-2 Audio Layer III.
In addition, the following standards, while not sequential advances to the video encoding standard as with MPEG-1 through MPEG-4, are referred to by similar notation:
Moreover, more recently than other standards above, MPEG has produced the following international standards; each of the standards holds multiple MPEG technologies for a variety of applications. (For example, MPEG-A includes a number of technologies on multimedia application format.)
|Abbreviation for group of standards||Title||ISO/IEC standard series number||First public release date (First edition)||Description|
|MPEG-1||Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to about 1.5 Mbit/s||ISO/IEC 11172||1993||Although the title focuses on bit rates of 1.5 Mbit/s and lower, the standard is also capable of higher bit rates.|
|MPEG-2||Generic Coding of Moving Pictures and Associated Audio Information||ISO/IEC 13818||1995|
|MPEG-3||N/A||N/A||N/A||Abandoned as unnecessary; requirements incorporated into MPEG-2|
|MPEG-4||Coding of Audio-Visual Objects||ISO/IEC 14496||1999|
|MPEG-7||Multimedia Content Description Interface||ISO/IEC 15938||2002|
|MPEG-21||Multimedia Framework||ISO/IEC 21000||2001|
|MPEG-A||Multimedia Application Format||ISO/IEC 23000||2007|
|MPEG-B||MPEG Systems Technologies||ISO/IEC 23001||2006|
|MPEG-C||MPEG Video Technologies||ISO/IEC 23002||2006|
|MPEG-D||MPEG Audio Technologies||ISO/IEC 23003||2007|
|MPEG-E||Multimedia Middleware||ISO/IEC 23004||2007|
|MPEG-V||Media Context and Control||ISO/IEC 23005||2011|
|MPEG-M||MPEG eXtensible Middleware (MXM)||ISO/IEC 23006||2010|
|MPEG-U||Rich Media User Interfaces||ISO/IEC 23007||2010|
|MPEG-H||High Efficiency Coding and Media Delivery in Heterogeneous Environments||ISO/IEC 23008||2013|
|MPEG-DASH||Dynamic Adaptive Streaming over HTTP||ISO/IEC 23009||2012|
|MPEG-I||Coded Representation of Immersive Media||ISO/IEC 23090||2020|
|MPEG-CICP||Coding-Independent Code Points||ISO/IEC 23091||2018||Originally part of MPEG-B|
|MPEG-G||Genomic Information Representation||ISO/IEC 23092||2019|
|MPEG-IoMT||Internet of Media Things||ISO/IEC 23093||2019|
|MPEG-5||General Video Coding||ISO/IEC 23094||2020||Essential Video Coding (EVC) and Low-Complexity Enhancement Video Coding (LCEVC)|
|(none)||Supplemental Media Technologies||ISO/IEC 29116||2008||Withdrawn and replaced by MPEG-M Part 4 – MPEG extensible middleware (MXM) protocols|
A standard published by ISO/IEC is the last stage of an approval process that starts with the proposal of new work within a committee. Stages of the standard development process include:
A proposal of work (New Proposal) is approved at the Subcommittee level and then at the Technical Committee level (SC 29 and JTC 1, respectively, in the case of MPEG). When the scope of new work is sufficiently clarified, MPEG usually makes open "calls for proposals". The first document that is produced for audio and video coding standards is typically called a test model. When a sufficient confidence in the stability of the standard under development is reached, a Working Draft (WD) is produced. When a WD is sufficiently solid (typically after producing several numbered WDs), the next draft is issued as a Committee Draft (CD) (usually at the planned time) and is sent to National Bodies (NBs) for comment. When a consensus is reached to proceed to the next stage, the draft becomes a Draft International Standard (DIS) and is sent for another ballot. After a review and comments issued by NBs and a resolution of comments in the working group, a Final Draft International Standard (FDIS) is typically issued for a final approval ballot. The final approval ballot is voted on by National Bodies, with no technical changes allowed (a yes/no approval ballot). If approved, the document becomes an International Standard (IS). In cases where the text is considered sufficiently mature, the WD, CD, and/or FDIS stages can be skipped. The development of a standard is completed when the FDIS document has been issued, with the FDIS stage only being for final approval, and in practice, the FDIS stage for MPEG standards has always resulted in approval.
((cite web)): CS1 maint: url-status (link)