Environmental Impact assessment (EIA) is the assessment of the environmental consequences of a plan, policy, program, or actual projects prior to the decision to move forward with the proposed action. In this context, the term "environmental impact assessment" is usually used when applied to actual projects by individuals or companies and the term "strategic environmental assessment" (SEA) applies to policies, plans and programmes most often proposed by organs of state.[1][2] It is a tool of environmental management forming a part of project approval and decision-making.[3] Environmental assessments may be governed by rules of administrative procedure regarding public participation and documentation of decision making, and may be subject to judicial review.
The purpose of the assessment is to ensure that decision-makers consider the environmental impacts when deciding whether or not to proceed with a project. The International Association for Impact Assessment (IAIA) defines an environmental impact assessment as "the process of identifying, predicting, evaluating and mitigating the biophysical, social, and other relevant effects of development proposals prior to major decisions being taken and commitments made".[4] EIAs are unique in that they do not require adherence to a predetermined environmental outcome, but rather they require decision-makers to account for environmental values in their decisions and to justify those decisions in light of detailed environmental studies and public comments on the potential environmental impacts.[5]
History
Environmental Impact Assessments commenced in the 1960s, as part of increasing environmental awareness.[6] An EIA is prepared to estimate the effects of a proposed development or construction project. EIA provides technical evaluations that are intended to contribute to more objective decision making. In the United States, EIA obtained formal status in 1969, with the enactment of the National Environmental Policy Act (NEPA). EIAs have been used increasingly around the world. The number of environmental assessments filed every year "has vastly overtaken the number of more rigorous Environmental Impact Statements (EIS)."[7] An environmental assessment is a "mini-Environmental Impact Statement (EIS) designed to provide sufficient information to allow the agency to decide whether the preparation of a full-blown Environmental Impact Statement (EIS) is necessary."[8][9]
Methods
General and industry specific assessment methods are available including:
Industrial products – Product environmental life cycle analysis (LCA) is used for identifying and measuring the impact of industrial products on the environment. These EIAs consider activities related to extraction of raw materials, ancillary materials, equipment; production, use, disposal and ancillary equipment.[10]
Genetically modified plants – Specific methods available to perform EIAs of genetically modified organisms include GMP-RAM and INOVA.[11]
Fuzzy logic – EIA methods need measurement data to estimate values of impact indicators. However, many of the environment impacts cannot be quantified, e.g. landscape quality, lifestyle quality and social acceptance. Instead, information from similar EIAs, expert judgment and community sentiment are employed. Approximate reasoning methods known as fuzzy logic can be used.[12] A fuzzy arithmetic approach has also been proposed[13] and implemented using a software tool (TDEIA).[14]
Follow-up
At the end of the project, an audit evaluates the accuracy of the EIA by comparing actual to predicted impacts. The objective is to make future EIAs more valid and effective. Two primary considerations are:
Scientific – to examine the accuracy of predictions and explain errors[citation needed]
Management – to assess the success of mitigation in reducing impacts[citation needed]
Audits can be performed either as a rigorous assessment of the null hypothesis or with a simpler approach comparing what actually occurred against the predictions in the EIA document.[15]
The history of EIA in Australia could be linked to the enactment of the U.S. National Environment Policy Act (NEPA) in 1970, which made the preparation of environmental impact statements a requirement. In Australia, one might say that the EIA procedures were introduced at a State Level prior to that of the Commonwealth (Federal), with a majority of the states having divergent views to the Commonwealth. One of the pioneering states was New South Wales, whose State Pollution Control Commission issued EIA guidelines in 1974. At a Commonwealth (i.e. Federal) level, this was followed by passing of the Environment Protection (Impact of Proposals) Act 1974 (Cth) in 1974. The Environment Protection and Biodiversity Conservation Act 1999 (Cth) (EPBC Act) superseded the Environment Protection (Impact of Proposals) Act 1974 (Cth) and is the current central piece for EIA in Australia on a Commonwealth (i.e. Federal) level. An important point to note is that this federal legislation does not override the validity of the States or Territories environmental and development assessments and approvals; rather the EPBC Act runs as a parallel to the State/Territory Systems.[16] Overlap between federal and state requirements is addressed via bilateral agreements or one-off accreditation of state processes, as provided for in the EPBC Act.[citation needed]
The Commonwealth Level
The EPBC Act provides a legal framework to protect and manage nationally and internationally important flora, fauna, ecological communities and heritage places. It defines this as matters of "national environmental significance". The following are the nine matters of such significance:[17]
World Heritage properties;
National Heritage places;
Wetlands of international importance (listed under the Ramsar Convention);
Listed threatened species and ecological communities;
Migratory species protected under international agreements;
Water resources, in relation with coal seam gas development and large coal mining development.
In addition to this, the EPBC Act aims at providing a streamlined national assessment and approval process for activities. These activities could be by the Commonwealth, or its agents, anywhere in the world or activities on Commonwealth land; and activities that are listed as having a 'significant impact' on matters of 'national environment significance'.[17]
The EPBC Act comes into play when a person (a proponent) wants an action (often called "a proposal" or "a project") assessed for environmental impacts under the EPBC Act, he or she must refer the project to the Department of the Environment and Energy (Commonwealth). This referral is then released to the public and the relevant state, territory and Commonwealth ministers, for comment on whether the project is likely to have a significant impact on matters of national environmental significance.[17] The Department of the Environment and Energy assess the process and makes recommendation to the minister or the delegate for the feasibility. The final discretion on the decision remains of the minister, which is not solely based on matters of national environmental significance but also on the consideration of social and economic impact of the project.[17]
The Australian Government Minister for the Environment and Energy cannot intervene in a proposal if it has no significant impact on one of the eight matters of national environmental significance, regardless of any other undesirable environmental impacts.[17] This is primarily due to the division of powers between the states and the Federal government, and the Australian Government environment minister not being able to overturn a state decision.[citation needed]
There are strict civil and criminal penalties for the breach of EPBC Act. Depending on the kind of breach, civil penalty (maximum) may go up to $550,000 for an individual and $5.5 million for a body corporate, or for criminal penalty (maximum) of seven years imprisonment and/or penalty of $46,200.[17]
The State and Territory Level
Australian Capital Territory (ACT)
EIA provisions within Ministerial Authorities in the ACT are found in the Chapters 7 and 8 of the Planning and Development Act 2007 (ACT). EIA in ACT was previously administered with the help of Part 4 of the Land (Planning and Environment) Act 1991 (Land Act) and Territory Plan (plan for land-use).[16]
Note that some EIA may occur in the ACT on Commonwealth land under the EPBC Act (Cth). Further provisions of the Australian Capital Territory (Planning and Land Management) Act 1988 (Cth) may also be applicable particularly to national land and "designated areas".[citation needed]
New South Wales (NSW)
In New South Wales, the Environment Planning and Assessment Act 1979 (EP&A Act) establishes two pathways for EIA. The first is under Division 5.2 of the EP&A Act, which provides for EIA of 'State Significant Infrastructure' projects (from June 2011, this Part replaced the previous Part 3A, which previously covered EIA of major projects). The second is under Part 4 of the EP&A Act dealing with development assessments for local, regional, and State Significant Developments (other than State Significant Infrastructure).[16]
Northern Territory (NT)
The EIA process in Northern Territory is chiefly administered under the Environmental Assessment Act (EAA).[18] Although EAA is the primary tool for EIA in Northern Territory, there are further provisions for proposals in the Inquiries Act 1985 (NT).[16]
Queensland (QLD)
There are four main EIA processes in Queensland.[19] Firstly, under the Integrated Planning Act 1997 (IPA) for development projects other than mining. Secondly, under the Chapter 3 of the Environmental Protection Act 1994 (Qld) (EP Act) for some mining and petroleum activities. Thirdly, under the State Development and Public Works Organisation Act 1971 (Qld) (State Development Act) for 'significant projects'. Finally, under the Environment Protection and Biodiversity Conservation Act 1999 (Cth) for 'controlled actions'.[19]
South Australia (SA)
The local governing tool for EIA in South Australia is the Development Act 1993 (SA). There are three levels of assessment possible under the Act in the form of an environment impact statement (EIS), a public environmental report (PER) or a Development Report (DR).[16]
Tasmania (TAS)
In Tasmania, an integrated system of legislation is used to govern development and approval process, this system is a mixture of the Environmental Management and Pollution Control Act 1994 (Tas) (EMPC Act), Land Use Planning and Approvals Act 1993 (Tas) (LUPA Act), State Policies and Projects Act 1993 (Tas) (SPPA), and Resource Management and Planning Appeals Tribunal Act 1993 (Tas).[16]
Victoria (VIC)
The EIA process in Victoria is intertwined with the Environment Effects Act 1978 (Vic) and the Ministerial Guidelines for Assessment of Environmental Effects (made under the s 10 of the EE Act).[20]
Western Australia (WA)
Part 4 of the Environmental Protection Act 1986 (WA) provides the legislative framework for the EIA process in Western Australia.[21] The EPA Act oversees the planning and development proposals and assesses their likely impacts on the environment.[citation needed]
Canada
In Friends of the Oldman River Society v. Canada (Minister of Transportation),(SCC 1992) La Forest J of the Supreme Court of Canada described environmental impact assessment in terms of the proper scope of federal jurisdiction with respect to environments matters,
"Environmental impact assessment is, in its simplest form, a planning tool that is now generally regarded as an integral component of sound decision-making."[22]
Supreme Court Justice La Forest cited (Cotton & Emond 1981, p. 245), "The basic concepts behind environmental assessment are simply stated: (1) early identification and evaluation of all potential environmental consequences of a proposed undertaking; (2) decision making that both guarantees the adequacy of this process and reconciles, to the greatest extent possible, the proponent's development desires with environmental protection and preservation."[23]
La Forest referred to (Jeffery 1989, 1.2,1.4) and (Emond 1978, p. 5) who described "...environmental assessments as a planning tool with both an information-gathering and a decision-making component" that provide "...an objective basis for granting or denying approval for a proposed development."[24][25]
Justice La Forest addressed his concerns about the implications of Bill C-45 regarding public navigation rights on lakes and rivers that would contradict previous cases.(La Forest 1973, pp. 178–80)[26]
The Canadian Environmental Assessment Act 2012 (CEAA 2012)[27] "and its regulations establish the legislative basis for the federal practice of environmental assessment in most regions of Canada."[28][29][30] CEAA 2012 came into force July 6, 2012 and replaces the former Canadian Environmental Assessment Act (1995). EA is defined as a planning tool to identify, understand, assess and mitigate, where possible, the environmental effects of a project.
"The purposes of this Act are:
(a) to protect the components of the environment that are within the legislative authority of Parliament from significant adverse environmental effects caused by a designated project;
(b) to ensure that designated projects that require the exercise of a power or performance of a duty or function by a federal authority under any Act of Parliament other than this Act to be carried out, are considered in a careful and precautionary manner to avoid significant adverse environmental effects;
(c) to promote cooperation and coordinated action between federal and provincial governments with respect to environmental assessments;
(d) to promote communication and cooperation with aboriginal peoples with respect to environmental assessments;
(e) to ensure that opportunities are provided for meaningful public participation during an environmental assessment;
(f) to ensure that an environmental assessment is completed in a timely manner;
(g) to ensure that projects, as defined in section 66, that are to be carried out on federal lands, or those that are outside Canada and that are to be carried out or financially supported by a federal authority, are considered in a careful and precautionary manner to avoid significant adverse environmental effects;
(h) to encourage federal authorities to take actions that promote sustainable development in order to achieve or maintain a healthy environment and a healthy economy; and
(i) to encourage the study of the cumulative effects of physical activities in a region and the consideration of those study results in environmental assessments."[31]
Environmental Lawyer Dianne Saxe argued that the CEAA 2012 "allows the federal government to create mandatory timelines for assessments of even the largest and most important projects, regardless of public opposition."[32]
"Now that federal environmental assessments are gone, the federal government will only assess very large, very important projects. But it's going to do them in a hurry."
On 22 April 2013, NDP MP Megan Leslie issued a statement claiming that the Harper government's recent changes to "fish habitat protection, the Navigable Waters Protection Act and the Canadian Environmental Assessment Act", along with gutting existing laws and making cuts to science and research, "will be disastrous, not only for the environment but also for Canadians' health and economic prosperity."[39] On 26 September 2012, Leslie argued that with the changes to the Canadian Environmental Assessment Act that came into effect 6 July 2012, "seismic testing, dams, wind farms and power plants" no longer required any federal environmental assessment. She also claimed that because the CEAA 2012—which she claimed was rushed through Parliament—dismantled the CEAA 1995, the Oshawa ethanol plant project would no longer have a full federal environmental assessment.[40] Mr. Peter Kent (Minister of the Environment) explained that the CEAA 2012 "provides for the Government of Canada and the Environmental Assessment Agency to focus on the large and most significant projects that are being proposed across the country." The 2,000 to 3,000-plus smaller screenings that were in effect under CEAA 1995 became the "responsibility of lower levels of government but are still subject to the same strict federal environmental laws."[40] Anne Minh-Thu Quach, MP for Beauharnois—Salaberry, QC, argued that the mammoth budget bill dismantled 50 years of environmental protection without consulting Canadians about the "colossal changes they are making to environmental assessments." She claimed that the federal government is entering into "limited consultations, by invitation only, months after the damage was done."[40]
China
The Environmental Impact Assessment Law (EIA Law) requires that an environmental impact assessment be completed prior to project construction. However, if a developer completely ignores this requirement and builds a project without submitting an environmental impact statement, the only penalty is that the environmental protection bureau (EPB) may require the developer to do a make-up environmental assessment. If the developer does not complete this make-up assessment within the designated time, only then is the EPB authorized to fine the developer. Even so, the possible fine is capped at a maximum of about US$25,000, a fraction of the overall cost of most major projects. The lack of more stringent enforcement mechanisms has resulted in a significant percentage of projects not completing legally required environmental impact assessments prior to construction.[41]
China's State Environmental Protection Administration (SEPA) used the legislation to halt 30 projects in 2004, including three hydro-power plants under the Three Gorges Project Company. Although one month later (Note as a point of reference, that the typical EIA for a major project in the USA takes one to two years.), most of the 30 halted projects resumed their construction, reportedly having passed the environmental assessment, the fact that these key projects' construction was ever suspended was notable.[citation needed]
A joint investigation by SEPA and the Ministry of Land and Resources in 2004 showed that 30–40% of the mining construction projects went through the procedure of environment impact assessment as required, while in some areas only 6–7% did so. This partly explains why China has witnessed so many mining accidents in recent years.[citation needed]
SEPA alone cannot guarantee the full enforcement of environmental laws and regulations, observed Professor Wang Canfa, director of the centre to help environmental victims at China University of Political Science and Law. In fact, according to Wang, the rate of China's environmental laws and regulations that are actually enforced is estimated at barely 10%.[42]
Egypt
Environmental Impact Assessment (EIA)
EIA is implemented in Egypt under the umbrella of the Ministry of state for environmental affairs. The Egyptian Environmental Affairs Agency (EEAA) is responsible for the EIA services.[43]
In June 1997, the responsibility of Egypt's first full-time Minister of State for Environmental Affairs was assigned as stated in the Presidential Decree no.275/1997. From thereon, the new ministry has focused, in close collaboration with the national and international development partners, on defining environmental policies, setting priorities and implementing initiatives within a context of sustainable development.[44]
According to the Law 4/1994 for the Protection of the Environment, the Egyptian Environmental Affairs Agency (EEAA) was restructured with the new mandate to substitute the institution initially established in 1982. At the central level, EEAA represents the executive arm of the Ministry.[45]
The purpose of EIA is to ensure the protection and conservation of the environment and natural resources including human health aspects against uncontrolled development. The long-term objective is to ensure a sustainable economic development that meets present needs without compromising future generations ability to meet their own needs. EIA is an important tool in the integrated environmental management approach.[46]
EIA must be performed for new establishments or projects and for expansions or renovations of existing establishments according to the Law for the Environment.[47]
EU
A wide range of instruments exist in the Environmental policy of the European Union. Among them the European Union has established a mix of mandatory and discretionary procedures to assess environmental impacts.[48]Directive (85/337/EEC) on Environmental Impact Assessments (known as the EIA Directive)[49] was first introduced in 1985, amended in 1997, amended again in 2003 following EU signature of the 1998 Aarhus Convention, and once more in 2009.[50]
The initial Directive of 1985 and its three amendments have been codified in Directive 2011/92/EU of 13 December 2011.[51]
In 2001, the issue was enlarged to include the assessment of plans and programmes by the so-called Strategic Environmental Assessment (SEA) Directive (2001/42/EC), which was amended by Directive 2014/52/EU of 16 April 2014.[52][48] Under the EU directive, a compliant EIA must provide certain information in seven key areas:[53]
Description of the project
Description of actual project and site description
Break the project down into its key components, i.e. construction, operations, decommissioning
For each component list all of the sources of environmental disturbance
For each component all the inputs and outputs must be listed, e.g., air pollution, noise, hydrology
Alternatives that have been considered
Examine alternatives that have been considered
Example: in a biomass power station, will the fuel be sourced locally or nationally?
Description of the environment
List of all aspects of the environment that may be affected by the development
This section is best carried out with the help of local experts, e.g. the RSPB in the UK
Description of the significant effects on the environment
The word significant is crucial here as the definition can vary
'Significant' must be defined
The most frequent method used here is use of the Leopold matrix
The matrix is a tool used in the systematic examination of potential interactions
Example: in a windfarm development a significant impact may be collisions with birds
Mitigation
This is where EIA is most useful
Once section 4 is complete, it is obvious where impacts are greatest
Using this information in ways to avoid negative impacts should be developed
Best working with the developer with this section as they know the project best
Using the windfarm example again, construction might take place outside of bird nesting seasons, or removal of hardstanding on a potentially contaminated land site might take place outside of the rainy season.
Non-technical summary (EIS)
The EIA is in the public domain and be used in the decision-making process
It is important that the information is available to the public
This section is a summary that does not include jargon or complicated diagrams
It should be understood by the informed lay-person
Lack of know-how/technical difficulties
This section is to advise any areas of weakness in knowledge
It can be used to focus areas of future research
Some developers see the EIA as a starting block for poor environmental management
In 2021, ESG reporting requirements changed in the EU and UK. The EU started enforcing the Sustainable Finance Disclosures Regulation (SFDR), which was created with the purpose of unifying climate risk disclosures across the private sector by 2023. It also requires businesses to report on "principal adverse impacts" for society and the environment.[54]
Annexed projects
All projects are either classified as Annex 1 or Annex 2 projects. Those lying in Annex 1 are large scale developments such as motorways, chemical works, bridges, power stations, etc. These always require an EIA under the Environmental Impact Assessment Directive (85,337,EEC as amended). Annex 2 projects are smaller in scale than those referred to in Annex 1. Member States must determine whether these project shall be made subject to an assessment subject to a set of criteria set out in Annex 3 of codified Directive 2011/92/EU.[citation needed]
The Netherlands
EIA was implemented in Dutch legislation on September 1, 1987. The categories of projects which require an EIA are summarised in Dutch legislation, the Wet milieubeheer. The use of thresholds for activities makes sure that EIA is obligatory for those activities that may have considerable impacts on the environment.[citation needed]
For projects and plans which fit these criteria, an EIA report is required. The EIA report defines a.o. the proposed initiative, it makes clear the impact of that initiative on the environment and compares this with the impact of possible alternatives with less a negative impact.[55]
United Kingdom
The EU Directives concerning environmental impact assessment are implemented in England through the Town and Country Planning (Environmental Impact Assessment) Regulations 2017, which also apply to projects serving national defence purposes in Northern Ireland, Scotland and Wales.[56]
Hong Kong
EIA in Hong Kong is regulated by the Environmental Impact Assessment Ordinance 1997, which became effective in 1998.[citation needed]
The original proposal to construct the Lok Ma Chau Spur Line overground across the Long Valley failed to get through EIA, and the Kowloon–Canton Railway Corporation had to change its plan and build the railway underground. In April 2011, the EIA of the Hong Kong section of the Hong Kong-Zhuhai-Macau Bridge was found to have breached the ordinance, and was declared unlawful. The appeal by the government was allowed in September 2011. However, it was estimated that this EIA court case had increased the construction cost of the Hong Kong section of the bridge by HK$6.5 billion in money-of-the-day prices.[57]
Iraq
The Ministry of Environment (MOE) of the federal government of Iraq is in charge of issuing environmental compliance certificates based on an EIA report prepared by professional consultant and thoroughly reviewed by the MOE. Any project or activity prior to its establishment or even already existing project has to be approved and obtain such certificate from the MOE. Projects are classified into 3 categories; “A”, “B” and “C”. EIA reporting is usually obligatory for those projects and activities falling under categories “A” (large-scale) and “B” (small-scale) that may have considerable impacts on environment.[58]
Examples of “A” category activities include dams and reservoirs, forestry production projects, industrial plants, irrigation, drainage and flood control, land clearance and leveling, port and harbor development, river basin development, thermal power and hydro-power development, manufacture, transportation and use of pesticides or other hazardous materials, hazardous waste management and disposal... etc. Examples of “B” category activities include agro-industries, electrical transmission, renewable energy, rural electrification, tourism, rehabilitation or maintenance of highway or rural roads, rehabilitation or modification of existing industrial facilities... etc. Preparation of an EIA report is usually exempt for projects falling under category “C” which may have low to no impact on environment, such as small fish breeding ponds, institutional development, most human resources projects...etc.[citation needed]
The main environmental legislation in Iraq is: Law No.64 for cities and land use (1965), Law No.21 for noise prevention (1966), Law No.25 for system of rivers and other water resources protection (1967), Law No.99 for ionized radiation (1980), Law No.89 for public health (drinking water provision, sanitation and environmental monitoring (1981), Law No.79 for protection and improvement of environment (1986), Environmental criteria for agricultural, industrial and public service projects (1990), Law No.3 for protection and improvement of environment (1997), Law No.2 for water systems protection (2001), Law No.44 for creation of Ministry of Environment instead of the council of protection and improvement of environment (2003), Law No.27 for environmental protection and improvement (2009),[59] Law No.4 for protection of ambient air system (2012).[citation needed]
Meanwhile, Environmental Protection and Improvement Board in the regional government of Kurdistan in the northern Iraq (Erbil, Duhok, Sulaimany and Garmyan) is responsible of issuing Environmental compliance certificate, the board was established according to law No.3 Environmental protection and improvement board in Iraqi Kurdistan Region (2010).[60] The board is responsible of issuing such certificate for all projects and activities except of petroleum operation which EIA process is organized and implemented by the Ministry of Natural Resources of Kurdistan Regional government.[61] The same Iraqi environmental legislation mentioned is adopted but the procedure for EIA in Iraqi-Kurdistan region government may differ from the one in the Federal government of Iraq.[citation needed]
India
The Ministry of Environment, Forests and Climate Change (MoEFCC) of India has been in a great effort in Environmental Impact Assessment in India. The main laws in action are the Water Act(1974), the Indian Wildlife (Protection) Act (1972), the Air (Prevention and Control of Pollution) Act (1981) and the Environment (Protection) Act (1986), Biological Diversity Act(2002).[62] The responsible body for this is the Central Pollution Control Board.[citation needed]
Environmental Impact Assessment (EIA) studies need a significant amount of primary and secondary environmental data. Primary data are those collected in the field to define the status of the environment (like air quality data, water quality data etc.). Secondary data are those collected over the years that can be used to understand the existing environmental scenario of the study area. The environmental impact assessment (EIA) studies are conducted over a short period of time and therefore the understanding of the environmental trends, based on a few months of primary data, has limitations. Ideally, the primary data must be considered along with the secondary data for complete understanding of the existing environmental status of the area. In many EIA studies, the secondary data needs could be as high as 80% of the total data requirement. EIC is the repository of one-stop secondary data source for environmental impact assessment in India.[citation needed]
The Environmental Impact Assessment (EIA) experience in India indicates that the lack of timely availability of reliable and authentic environmental data has been a major bottleneck in achieving the full benefits of EIA. The environment being a multi-disciplinary subject, a multitude of agencies are involved in collection of environmental data. However, no single organization in India tracks available data from these agencies and makes it available in one place in a form required by environmental impact assessment practitioners. Further, environmental data is not available in enhanced forms that improve the quality of the EIA. This makes it harder and more time-consuming to generate environmental impact assessments and receive timely environmental clearances from regulators. With this background, the Environmental Information Centre (EIC) has been set up to serve as a professionally managed clearinghouse of environmental information that can be used by MoEF, project proponents, consultants, NGOs and other stakeholders involved in the process of environmental impact assessment in India. EIC caters to the need of creating and disseminating of organized environmental data for various developmental initiatives all over the country.[citation needed]
EIC stores data in GIS format and makes it available to all environmental impact assessment studies and to EIA stakeholders.[citation needed]
In 2020, the Government of India proposed a new EIA 2020 Draft, which was widely criticized for heavily diluting the EIA.[63] Many Environmental groups started a campaign demanding the withdrawal of the Draft, in face of these campaigns, the Government of India resorted to banning/blocking the websites of these groups.[64]
Malaysia
In Malaysia, Section 34A, Environmental Quality Act, 1974[65] requires developments that have significant impact to the environment are required to conduct the Environmental impact assessment.[66]
Nepal
In Nepal, EIA has been integrated in major development projects since the early 1980s. In the planning history of Nepal, the sixth plan (1980–85), for the first time, recognized the need for EIA with the establishment of Environmental Impact Study Project (EISP) under the Department of Soil Conservation in 1982 to develop necessary instruments for integration of EIA in infrastructure development projects. However, the government of Nepal enunciated environment conservation-related policies in the seventh plan (NPC, 1985–1990). To enforce this policy and make necessary arrangements, a series of guidelines were developed, thereby incorporating the elements of environmental factors right from the project formulation stage of the development plans
and projects and to avoid or minimize adverse effects on the ecological system. In addition, it has also emphasized that EIAs of industry, tourism, water resources, transportation, urbanization, agriculture, forest and other developmental projects be conducted.[citation needed]
In Nepal, the government's Environmental Impact Assessment Guideline of 1993 inspired the enactment of the Environment Protection Act (EPA) of 1997 and the Environment Protection Rules (EPR) of 1997 (EPA and EPR have been enforced since 24 and 26 June 1997 respectively in Nepal) to internalizing the environmental assessment system. The process institutionalized the EIA process in development proposals and enactment, which makes the integration of IEE and EIA legally binding to the prescribed projects. The projects, requiring EIA or IEE, are included in Schedules 1 and 2 of the EPR, 1997 (GoN/MoLJPA 1997).[citation needed]
New Zealand
In New Zealand, EIA is usually referred to as Assessment of Environmental Effects (AEE). The first use of EIA's dates back to a Cabinet minute passed in 1974 called Environmental Protection and Enhancement Procedures. This had no legal force and only related to the activities of government departments. When the Resource Management Act was passed in 1991, an EIA was required as part of a resource consent application. Section 88 of the Act specifies that the AEE must include "such detail as corresponds with the scale and significance of the effects that the activity may have on the environment". While there is no duty to consult any person when making a resource consent application (Sections 36A and Schedule 4), proof of consultation is almost certain required by local councils when they decide whether or not to publicly notify the consent application under Section 93.[67]
Pakistan
The Pakistan Environmental Protection Agency is an executive agency of the Government of Pakistan managed by the Ministry of Climate Change. The agency is charged with protecting human health and the environment by writing and enforcing regulations based on laws passed by Parliament. The Directorate of Environmental Impact Assessment (EIA) or Initial Environmental Examination (IEE) is tasked with implementing the Pakistan Environment Protection Act (PEPA) - 1997, specifically Section 12 and Review of IEE/EIA Regulations 2000. This Directorate comprises two sections namely EIA or Monitoring and Environment Engineering And Technology Transfer. All public and private sector developmental projects that fall under any of the Schedules of Regulations have to obtain environmental approval in respect of their projects. The EIA/Monitoring Section also conducts post-environmental approval monitoring to ascertain the compliance status of the Environment Management Plan (EMP).[68]
Russian Federation
As of 2004[update], the state authority responsible for conducting the State EIA in Russia has been split between two Federal bodies: 1) Federal service for monitoring the use of natural resources – a part of the Russian Ministry for Natural Resources and Environment and 2) Federal Service for Ecological, Technological and Nuclear Control. The two main pieces of environmental legislation in Russia are the Federal Law 'On Ecological Expertise', 1995 and the 'Regulations on Assessment of Impact from Intended Business and Other Activity on Environment in the Russian Federation', 2000.[69]
Federal Service for monitoring the use of natural resources
In 2006, the parliament committee on ecology in conjunction with the Ministry for Natural Resources and Environment, created a working group to prepare a number of amendments to existing legislation to cover such topics as stringent project documentation for building of potentially environmentally damaging objects as well as building of projects on the territory of protected areas. There has been some success in this area, as evidenced from abandonment of plans to construct a gas pipe-line through the only remaining habitat of the critically endangeredAmur leopard in the Russian Far East.[citation needed]
Federal Service for Ecological, Technological and Nuclear Control
The government's decision to hand over control over several important procedures, including state EIA in the field of all types of energy projects, to the Federal Service for Ecological, Technological and Nuclear Control has caused major controversy and elicited criticism from environmental groups, which have blamed the government for giving nuclear power industry control over the state EIA.[citation needed]
The main problem concerning State EIA in Russia is the clear differentiation of jurisdiction between the two above-mentioned Federal bodies.[citation needed]
Sri Lanka
The National Environmental Act, 1998 requires environmental impact assessment for large scale projects in sensitive areas. It is enforced by the Central Environmental Authority.[70]
Ukraine
The new law of Ukraine on evaluation of impact on surroundings prescribes the requirements of environmental safety, rational use of national resources, minimizing of harmful impact on surroundings in the process of making managerial decisions about planned activity. The designing of the conclusion of evaluation of impact is a result of its conducting. The key moment of the law on evaluation of impact on surroundings is a substitution of conclusion of state environmental expertise on the conclusion of evaluation of impact on surroundings. Business entity is forbidden to conduct or to start its planned activity without the conclusion of impact on surroundings.[71]
The National Environmental Policy Act of 1969 (NEPA), enacted in 1970, established a policy of environmental impact assessment for federal agency actions, federally funded activities or federally permitted/licensed activities that in the U. S. is termed "environmental review" or simply "the NEPA process."[72] The law also created the Council on Environmental Quality, which promulgated regulations to codify the law's requirements.[73] Under United States environmental law an Environmental Assessment (EA) is compiled to determine the need for an Environmental Impact Statement (EIS). Federal or federalized actions expected to subject or be subject to significant environmental impacts will publish a Notice of Intent to Prepare an EIS as soon as significance is known. Certain actions of federalagencies must be preceded by the NEPA process. Contrary to a widespread misconception, NEPA does not prohibit the federal government or its licensees/permittees from harming the environment, nor does it specify any penalty if an environmental impact assessment turns out to be inaccurate, intentionally or otherwise. NEPA requires that plausible statements as to the prospective impacts be disclosed in advance. The purpose of NEPA process is to ensure that the decision maker is fully informed of the environmental aspects and consequences prior to making the final decision.[citation needed]
Environmental assessment
An environmental assessment (EA) is an environmental analysis prepared pursuant to the National Environmental Policy Act to determine whether a federal action would significantly affect the environment and thus require a more detailed Environmental Impact Statement (EIS). The certified release of an Environmental Assessment results in either a Finding of No Significant Impact (FONSI) or an EIS.[74]
The Council on Environmental Quality (CEQ), which oversees the administration of NEPA, issued regulations for implementing the NEPA in 1979. Eccleston reports that the NEPA regulations barely mention preparation of EAs. This is because the EA was originally intended to be a simple document used in relatively rare instances where an agency was not sure if the potential significance of an action would be sufficient to trigger preparation of an EIS. But today, because EISs are so much longer and complicated to prepare, federal agencies are going to great effort to avoid preparing EISs by using EAs, even in cases where the use of EAs may be inappropriate. The ratio of EAs that are being issued compared to EISs is about 100 to 1.[75]
In July 2020, President Donald Trump moved to significantly weaken NEPA. CEQ published a final rule which limits the duration of EAs to 1 year and EISs to 2 years. The rule also exempts a number of projects from review entirely and prevents the consideration of cumulative environmental impacts, including those caused by climate change. The rule went into effect on September 14, 2020 and is the first update to the CEQ regulations since their promulgation in 1978.[76][77]
Content
The Environmental Assessment is a concise public document prepared by the federal action agency that serves to:
briefly provide sufficient evidence and analysis for determining whether to prepare an EIS or a Finding of No Significant Impact (FONSI)
Demonstrate compliance with the act when no EIS is required
facilitate the preparation of an EIS when a FONSI cannot be demonstrated
The Environmental Assessment includes a brief discussion of the purpose and need of the proposal and of its alternatives as required by NEPA 102(2)(E), and of the human environmental impacts resulting from and occurring to the proposed actions and alternatives considered practicable, plus a listing of studies conducted and agencies and stakeholders consulted to reach these conclusions. The action agency must approve an EA before it is made available to the public. The EA is made public through notices of availability by local, state, or regional clearing houses, often triggered by the purchase of a public notice advertisement in a newspaper of general circulation in the proposed activity area.[citation needed]
Structure
The structure of a generic Environmental Assessment is as follows:
Summary
Introduction
Background
Purpose and Need for Action
Proposed Action
Decision Framework
Public Involvement
Issues
Alternatives, including the Proposed Action
Alternatives
Mitigation Common to All Alternatives
Comparison of Alternatives
Environmental Consequences
Consultation and Coordination
Procedure
The EA becomes a draft public document when notice of it is published, usually in a newspaper of general circulation in the area affected by the proposal. There is a 15-day review period required for an Environmental Assessment (30 days if exceptional circumstances) while the document is made available for public commentary, and a similar time for any objection to improper process. Commenting on the Draft EA is typically done in writing or email, submitted to the lead action agency as published in the notice of availability. An EA does not require a public hearing for verbal comments. Following the mandated public comment period, the lead action agency responds to any comments, and certifies either a FONSI or a Notice of Intent (NOI) to prepare an EIS in its public environmental review record. The preparation of an EIS then generates a similar but more lengthy, involved and expensive process.[citation needed]
Several state governments that have adopted "little NEPAs," state laws imposing EIS requirements for particular state actions. Some of those state laws such as the California Environmental Quality Act refer to the required environmental impact study as an environmental impact report.[80]
This variety of state requirements produces voluminous data not just upon impacts of individual projects, but also in insufficiently researched scientific domains. For example, in a seemingly routine Environmental Impact Report for the city of Monterey, California, information came to light that led to the official federal endangered species listing of Hickman's potentilla, a rare coastal wildflower.[81][82]
Environmental protection is inherently a cross-border issue and has led to the creation of transnational regulation via multilateral and bilateral treaties. The United Nations Conference on the Human Environment (UNCHE or Stockholm Conference) held in Stockholm in 1972 and the United Nations Conference on the Environment and Development (UNCED or Rio Summit, Rio Conference, or Earth Summit) held in Rio de Janeiro in 1992 were key in the creation of about 1,000 international instruments that include at least some provisions related to the environment and its protection.[84]
However, as there is no universal legislature or administration with a comprehensive mandate, most international treaties exist parallel to one another and are further developed without the benefit of consideration being given to potential conflicts with other agreements. There is also the issue of international enforcement.[86] This has led to duplications and failures, in part due to an inability to enforce agreements. An example is the failure of many international fisheries regimes to restrict harvesting practises.[87]
Criticism
According to Jay et al., EIA is used as a decision-aiding tool rather than decision-making tool. There is growing dissent about them as their influence on decisions is limited. Improved training for practitioners, guidance on bestpractice and continuing research have all been proposed.[88]
EIAs have been criticized for excessively limiting their scope in space and time. No accepted procedure exists for determining such boundaries. The boundary refers to 'the spatial and temporal boundary of the proposal's effects'. This boundary is determined by the applicant and the lead assessor, but in practice, almost all EIAs address only direct and immediate on-site effects.[89]
Development causes both direct and indirect effects. Consumption of goods and services, production, use and disposal of building materials and machinery, additional land use for activities of manufacturing and services, mining and refining, etc., all have environmental impacts. The indirect effects of development can be much higher than the direct effects examined by an EIA. Proposals such as airports or shipyards cause wide-ranging national and international effects, which should be covered in EIAs.[90]
Broadening the scope of EIA can benefit the conservation of threatened species. Instead of concentrating on the project site, some EIAs employed a habitat-based approach that focused on much broader relationships among humans and the environment. As a result, alternatives that reduce the negative effects to the population of whole species, rather than local subpopulations, can be assessed.[91]
Thissen and Agusdinata[92] have argued that little attention is given to the systematic identification and assessment of uncertainties in environmental studies which is critical in situations where uncertainty cannot be easily reduced by doing more research. In line with this, Maier et al.[93] have concluded on the need to consider uncertainty at all stages of the decision-making process. In such a way decisions can be made with confidence or known uncertainty. These proposals are justified on data that shows that environmental assessments fail to predict accurately the impacts observed. Tenney et al.[94] and Wood et al.[95] have reported evidence of the intrinsic uncertainty attached to EIAs predictions from a number of case studies worldwide. The gathered evidence consisted of comparisons between predictions in EIAs and the impacts measured during, or following project implementation. In explaining this trend, Tenney et al.[94] have highlighted major causes such as project changes, modelling errors, errors in data and assumptions taken and bias introduced by people in the projects analyzed. Some approaches to deal with uncertainty in EIA have been reviewed in.[96]
There has also been criticism on the EIAs in the United States not addressing environmental justice concerns sufficiently. Yakuba writes "However, environmental history provides evidence that political process and special interests govern the attainment of the EJ goal by way of inadequate adherence to the NEPA provisions. Public participation (PP) is a principal requirement for achieving environmental justice and constitutes a pivotal determinant of EIA outcome."[97]
Most recent analyses indicated that the persistent problem may have its roots in socio-cultural settings, and environment-nurturing cultural value should be regarded as one among major progressive cultures, and its implementation will need to engage the corporate sector.[98]
^Holder, J., (2004), Environmental Assessment: The Regulation of Decision Making, Oxford University Press, New York; For a comparative discussion of the elements of various domestic EIA systems, see Christopher Wood Environmental Impact Assessment: A Comparative Review (2 ed, Prentice Hall, Harlow, 2002).
^Peche, R., & Rodriguez, E., (2009) Environmental impact Assessment procedure: A new approach based on Fuzzy logic Environmental Impact Assessment review 29:275–283
^Duarte O. (2000) Técnicas Difusas en la Evaluación de Impacto Ambiental. Ph.D. Thesis, Universidad de Granada
^Cotton, Roger; Emond, D. Paul (1981). John Swaigen (ed.). Environmental Impact Assessment. Environmental Rights in Canada. Toronto, Ontario: Butterworths.
^Jeffery, Michael I. (1989). Environmental Approvals in Canada. Toronto, Ontario: Butterworths.
^Eccleston, Charles; Doub, J. Peyton (2012). Preparing NEPA Environmental Assessments: A User's Guide to Best Professional Practices. CRC Press. ISBN9781439808825.
^CEQ (2020-07-16). "Update to the Regulations Implementing the Procedural Provisions of the National Environmental Policy Act; Final rule." Federal Register, 85 FR43304
^C.M. Hogan, G. Deghi, M. Papineau et al., Environmental Impact Report for the Pebble Beach Properties project by Del Monte Forest, Earth Metrics Inc. Prepared for the city of Monterey and State of California Clearinghouse (1992)
^U.S. Federal Register: August 2, 1995 (Volume 60, Number 148, Pages 39326-39337)
^Sands, P., (1989), The Environment, Community and International Law, Harvard International Law Lournal, 393, p402
^Weiss, E., (1999), Understanding Compliance with International Environmental Agreements: The Bakers Dozen Myths, Univ Richmond L.R. 32, 1555
^Wolfrum, R., & Matz, N., (2003), Conflicts in International Environmental Law, Max-Planck-Institut für Ausländisches Öffentliches Recht und Völkerrech
^Young, O., (1999), The Effectiveness of International Environmental Regimes, MIT Press
^Lenzen, M.; Murray, S.; Korte, B.; Dey, C. (2003). "Environmental impact assessment including indirect effects—a case study using input-output analysis". Environmental Impact Assessment Review. 23 (3). Elsevier: 263–282. doi:10.1016/S0195-9255(02)00104-X.
^Fernandes, João P. (2000). "EIA procedure, Landscape ecology and conservation management—Evaluation of alternatives in a highway EIA process". Environmental Impact Assessment Review. 20 (6). Elsevier: 665–680. doi:10.1016/S0195-9255(00)00060-3.
^Thissen, WIH; Agusdinata, DB (2008). "Handling deep uncertainties in impact assessment". In Proceedings of the 28th Annual Conference of the IAIA May 5–9, 2008, Perth, Australia. IAIA.
^Maier, HR; Ascough, JC; Wattenbach, M; Renschler, CS; Labiosa, WB (2008). "Uncertainty in Environmental Decision Making: Issues, Challenges and Future Directions". Publications from USDA-ARS/UNL Faculty. Paper 399. USDA-ARS/UNL Faculty.
^Wood, C; Dipper, B; Jones, C (2000). "Auditing the assessments of the environmental impacts of planning projects". Journal of Environmental Planning and Management. 43 (1): 23–47. doi:10.1080/09640560010757. S2CID134202298.
^Yakuba, O. (2018). Delivering Environmental Justice through Environmental Impact Assessment in the United States: The Challenge of Public Participation. MDPI.
Friends of the Oldman River Society v. Canada (Minister of Transport), 1992 CanLII 110, [1992] 1 SCR 3 (23 January 1992), Supreme Court of Canada (Canada)
Fischer, T. B. (ed., 2016). Environmental Assessment. Critical Concepts of the Built Environment, Routledge, New York. ISBN978-1-138-77776-7
Glasson, J; Therivel, R; Chadwick A. (2005). Introduction to Environmental Impact Assessment. London: Routledge
Hanna, K. (2009). Environmental Impact Assessment: Practice and Participation, 2nd ed. Oxford
Petts, J. (ed.), Handbook of Environmental Impact Assessment, Vols 1 & 2. Oxford, UK: Blackwell. ISBN0-632-04772-0
Ruddy, T. F.; Hilty, L. M. (2008). "Impact assessment and policy learning in the European Commission". Environmental Impact Assessment Review. 28 (2–3): 90. doi:10.1016/j.eiar.2007.05.001.
