You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.201.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 23:54, 31 July 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 April 2025
Your current IP address is 44.201.219.156. The blocked range is 44.201.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Fastening a strap around item or bundle))
((about|bands used in packaging|the form of corporal punishment|Strapping (punishment)|strips of wood used in furring|Furring))
((Multiple Issues|
((refimprove|date=October 2010))
((Technical|date=July 2023))
))
<!-- Deleted image removed: [[File:Box with strapping.jpg|thumb|Box closed with three polypropylene straps]] -->

'''Strapping''', also known as '''bundling''' and '''banding''', is the process of applying a [[strap]] to an item to combine, stabilize, hold, reinforce, or fasten it. A strap may also be referred to as ''strapping''. Strapping is most commonly used in the [[packaging industry]].
[[File:UNICEF pallets 02.jpg|thumb|Telescope corrugated boxes closed with strapping. Boxes are attached to [[pallet]] with bands of strapping, with edge protectors at the top of the load.]]

==Types of strap==
Strap is a flat, flexible material, most commonly made from [[steel]] or various types of [[plastic]].

===Steel===
[[File:M55s (VX rockets) ready for transport.jpg|thumb|Strapping used on a shipment of [[Chemical weapon|chemical weapons]] slated for destruction]]
[[File:FEMA - 37694 - FEMA Disaster relief supplies staged in Louisiana.jpg|thumb|[[Soft goods]] strapped in a bale or bundle]]

Steel is the oldest and highest tensile strength strapping. It is available in a variety of widths and thicknesses as well as variations in the [[Steel grades|grade of steel]]. Steel is used for heavy duty holding where high strength and minimal stretch are desired. [[Surface finish]]es for steel strap include: [[paint]], paint and [[wax]], [[bluing (steel)|bluing]], or [[zinc plating|zinc]] and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of [[Tensioner|tensioners]]. Common applications include steel coils, bundles of metal, [[baling wire]], [[brick]]s and other [[paver (flooring)|pavers]], and roll end-binding. 

Steel strapping is sold by weight rather than length due to the natural expansion and contraction of steel in the manufacturing process. A 3/4 x .020 steel strapping coil yields approximately 19.6 feet per pound.<ref>[https://www.thepackaginggroup.com/products/3-4-x-020-steel-strapping-signode-085206# 3/4 x .020 Steel Strapping Dimensions]</ref>

===Polypropylene===
[[Polypropylene]] strap (oriented or ((not a typo|tensilized))) is an economical material designed for light to medium duty unitizing, palletizing, and bundling. It is available in various widths, thicknesses, and [[polymer]] variations (e.g., [[Copolymer|copolymers]]). Most polypropylene is [[Embossing (manufacturing)|embossed]], and some is also printed. This product offers higher elongation at break, but tends to have irrecoverable dead stretch with constant [[Stress (mechanics)|stress]]. What is not generally known to end users((Editorializing|date=July 2023)) is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in [[Room temperature|ambient temperature]]. Consequently, although it is suitable for packs due to a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on solid product, such as brick or concrete. Furthermore, polypropylene strapping is susceptible to [[UV degradation]] and can degrade quickly if left exposed to the elements. UV degradation can be mitigated by specifying the use of black strap or a UV inhibitor.

Polypropylene strapping can be printed. For the highest quality and precision, printing occurs during production (and pre-embossing). Printing can also occur post-production over the embossing, at the cost of reduced quality. Both options offer security and marketing advantages to the strapped product((promotion-inline|date=July 2023)).

===Polyester===
Oriented or ((not a typo|tensilized)) [[polyester]] and [[nylon]] are the strongest plastic strapping products and are used as a viable alternative to steel strapping in some industries.((citation needed|date=January 2015)) Polyester provides excellent retained tension on rigid loads. Its excellent recovery properties help a load absorb impact without strap breakage.

There are specialized types available for specific applications. For instance, in cold climates a strap bonded in [[hot melt glue]] is used because it is [[weather-proof]].((Citation needed|date=December 2009))

===Nylon===
Nylon strap has the greatest [[specific strength]] of the three plastics, but it is rarely used due to its high price. Nylon strap used to be very popular, but over time polyester strap has almost completely replaced nylon. Nylon strap is still used in cold room applications, however, because it does not [[creep (deformation)|creep]] as much as the other types of plastic.

===Corded and woven===
Corded and [[Woven fabric|woven]] strapping are available in several constructions, primarily involving polyester and [[rayon]]. Some types are reusable. Because this system uses a buckle for a joint, corded and woven strapping can have a larger system strength than steel banding. Corded polyester strapping also has a higher elongation than other strapping systems, which gives it an ideal memory for sea and rail shipments. Because corded and woven polyester straps are light and soft, they are also a safer alternative to steel banding.

===Paper===
[[Paper]] strap is used to strap paper products between [[industrial processes]]. This allows the bundle to be introduced into the process without cutting the straps, which can lead to the product falling apart prematurely.<ref>((cite patent | inventor-last = Denver | inventor-first = Edward | inventor2-last = Weber | inventor2-first = Paul W. | issue-date = 2006-10-10 | title = Paper strap | country-code = US | patent-number =7118648)).</ref>

===Composite===
Composite strapping has polyester filaments embedded longitudinally down the length of the strap that provides the tensile strength. These polyester yarn fibers are embedded within a polypropylene [[coating]]. The polypropylene provides foam to the strap, but also improves the non-slip characteristic when combined with the wire buckle. In the load securing industry, composite is often referred to as "synthetic steel". It is very [[abrasion resistance|abrasion-resistant]] and has the highest joint efficiency when used with a buckle. Both advantages are not affected by climate.((Citation needed|date=December 2009))

==Uses of strapping==
Examples include:
*Bundling items together for handling and shipment: newspapers, pipe, [[lumber]], concrete block, etc.
*Attaching items to [[pallet]]s, skids, and [[crate]]s<ref>((citation
 | last = Laundrie
 | title = Unitizing Goods on Pallets and Slipsheets, FPL-GTR-52
 | journal =US Forest Products Laboratory
 | date =1986
 | url =https://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr52.pdf
 | access-date = 7 April 2020))
</ref>
*Attaching items to [[Flatcar|flatcars]], flatbed [[semi-trailer]]s,
*Securing a [[unit load]] of bricks, packaged glass, metal parts, etc.
*Closing corrugated boxes and [[shipping container]]s
*Securing coils of steel or paper
*Holding bales of agricultural products or [[Textile|textiles]]
*[[Load securing]] items within [[intermodal container]]s, [[boxcar]]s,<ref>((Cite journal
  | title =Loading Carload Shipments
  | journal = AAR Circular 42J
  | publisher =AAR
  | year =  2001
  | url =http://www.uprr.com/customers/dam-prev/attachments/cir42-j.pdf
  ))</ref> and semi-trailers

Strapping is most often used in complete horizontal or vertical bands. ''Edge protectors'' are used to help distribute the load at corners and reduce damage done to the load by the tensioned strap. Strapping can also be used in loops attached to holding locations on rail cars, skids, etc.

==Joining methods==
After the strap is tensioned, the strap is often sealed to itself. Steel strap is sealed with a seal and notch joint, a seal and crimp, seal-less joint, or via [[welding]]. Seals come in various shapes depending on the application; some can be put on after the strap is tensioned, while others must be installed before tensioning. To create the seal, the seal and strap are notched on both sides; if one set of notches are created then it is called a ''single notch'' joint, if two sets of notches are created then it is called a ''double notch'' joint. Crimp joints also use a seal, but crimp undulations are used instead of formed notches. These crimps form great [[frictional force]]s which keep the joint from seeping. Seal-less joints are created by forming interlocking ''keys'' into the middle of the strap.

Plastic strap is most commonly joined by melting the straps together by adding heat to the joint. For lighter gauge strap, usually ((convert|16|mm|abbr=on)) and narrower, heat is introduced with a hot knife system. First, the hot knife moves in between the straps. Then a [[platen]] comes up and compresses the straps and hot knife against an anvil on the order of tens of milliseconds. The platen then drops and the hot knife is removed. After the hot knife is completely clear of the straps the platen comes back up and compresses the joint so that the melted portions of the strap mix and harden.

For thicker plastic strap, usually ((convert|0.73|mm|abbr=on)) and thicker, friction is used to create heat within the joint. The process starts with the strap compressed between the platen and the anvil. There is a vibrator built into either the platen or the anvil, which has [[Serration|teeth]]; there are also teeth on the opposite component, which does not move. The vibrator is quickly vibrated, which creates enough heat to melt the interface between the two strap, because of friction. To complete the weld the vibrator is stopped and the pressure held until the joint has solidified. Polypropylene and Polyester strapping can also be sealed in a similar manner with the heat being produced by sound in the form of Ultrasonic waves passing through the materials and exiting the molecular structure. They are then compressed as in a heat seal. In ultrasonic welding of plastics, high frequency (15&nbsp;kHz to 40&nbsp;kHz ) low amplitude vibration is used to create heat by way of friction between the materials to be joined. The interface of the two parts is specially designed to concentrate the energy for the maximum weld strength.

It may also be joined manually by crimping a seal or via a buckle.

The joint is the weakest part of the system, therefore the type of joining method used is very important if strength is an issue. The strength of a joint is defined as the force required to break the strap in uniaxial tension. This is then compared to the uniaxial strength of the strap and recorded as the percent difference (e.g., a sample of steel strap may have a ((convert|5000|lb|abbr=on)) break strength and the seal may fail at ((convert|3000|lb|abbr=on)), so the seal is said to have a 60% strength). Hot knife welds have a minimum break strength of 55%((Citation needed|date=July 2023)). Friction welds have a minimum break strength of 65%. Well set up strapping machines or friction weld tools will aim for around 80% of break strength. Metal clips/seals((Vague|date=July 2023)) are surprisingly low((editorializing|date=July 2023)) with about 100 – 120&nbsp;kg slip resistance.

For pallets strapping based on norm ASTM D3953 Standard Specification, the number of the strapping procedure is around 10 times for a minimal.((Clarify|date=July 2023))

==Equipment==<!-- [[Bundler (strapping)]] redirects here -->
[[File:Strapping Saturn 2500.jpg|thumb|right|200px|A tabletop arch strapper.]]
There are two major types of equipment available for strapping: hand tools, and ''strapping machines'' or ''banding machines''. A dispenser((definition needed|date=July 2023)) is used with both types of equipment to dispense the strap. Some strapping machines have the dispenser built-in; others (typically those on large arch machines) have a separately powered dispenser, which can automatically load or thread new coils. Non-powered separated dispensers have a [[pulley]] which releases and activates a [[brake]] to stop the [[inertia]] of the coil and keep the strap from over-running((definition needed|date=July 2023)) onto the floor. Typically, dispensers used on large arch strapping machines have multiple pulleys to act as a way to store strap in a way that can be quickly dispensed. Smaller arch machines, such as tabletop machines, will feed strap into a pool box/[[Hydraulic accumulator|accumulator]] instead. In both cases this((which|date=July 2023)) is required; otherwise, the strapping machine will draw the strap faster than the dispenser can pay off((clarify|date=July 2023)).

=== Hand tools ===
There are two types of hand tools: manual, and automatic.

Both manual and automatic tools are available as combination tools, which perform the tensioning, sealing and cutting, or as separate tensioners, sealers, and cutters. Manual and automatic hand sealers for steel can use either a seal or a seal-less joint. 

Manual tensioners and crimping systems are available for low-volume applications. Manual sealers for plastic strap always use a seal and a compression (serrated seals) or crimp joint (smooth-faced seals).

Automatic hand tools are used for higher-volume applications. Automatic tools can be powered by an [[electric battery]], or by [[compressed air]]. Automatic hand tools for plastic strap use a friction weld.

=== Strapping machines ===
Strapping machines, also known as ''bundlers'' or ''banders'', are used for higher-volume applications or special applications. They are available in horizontal and vertical orientations (with the vertical orientation being far more common). They are also available in bottom seal, side seal, and top seal orientations, which define where the joint is located on the bundle. 

Strapping machines are available in semi-automatic and automatic varieties. The automatic machines can additionally be used inline with [[conveyor]] systems. A [[photocell]] is used to detect when the bundle is in the correct location, stop the conveyors, and activate the strapping machine. Most, however, will be found in standalone applications.
Semi-automatic and fully automatic strapping machines substantially improve efficiency in a warehouse and also the overall presentation of a packaged product. The saved labor can often easily cover the relatively low cost((compared to?|date=July 2023)) of the strapping machine.

Both semi- and fully-automatic strapping machines can easily be included in a packing production line where packing tables and strapping machines are positioned at workable heights.

[[File:ATS US-2000 Banding Machine.jpg|thumb|right|200px|Banding Machine]]
Banding machines like strapping machines allow the unitization and securing of products with a variety of different shapes and sizes.<ref>[https://www.ats-tanner.com/en/banding-machines Banding Machines]</ref>

Banding machines, however, are less damaging to the product being strapped, since the larger widths of bands available (20mm - 100mm) allow greater surface area that minimizes the harm on sensitive products. Banding machines can also run on paper straps for a more eco-friendly alternative to plastic strapping.<ref>[https://www.ats-tanner.com/en/banding-material Banding Materials]</ref>

Operation is by photo-sensor, foot pedal, or a PLC, allowing these machines to be integrated into production lines or for standalone operation.

Automatic strapping machines allow hands-free securing of parcels with automatically tensioned, sealed, and cut polypropylene strapping. 

These machines are operated either by foot pedal or parcel sensor, which makes them ideal for volume throughput.

Semi-automatic strapping machines will allow one operator to automatically tension, seal, and cut polypropylene strapping to give neat and secure fastening on any size box. 

Adjustable strap tensioning to suit each package prevents strap damage to softer boxes.

==See also==
*[[Cable tie]]
*[[Packaging and labeling]]

==References==
((Reflist))

==Further reading==
* Yam, K. L., "Encyclopedia of Packaging Technology", John Wiley & Sons, 2009, ((ISBN|978-0-470-08704-6))
* [[Wulftec International]]

==Standards==
*ASTM D3953 Standard Specification for Strapping, Flat Steel and Seals
*ASTM D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
*ASTM D4675 Standard Guide for Selection and Use of Flat Strapping Materials
*BS EN13891:2003  Tensional Strapping - Guide to selection and use of tensional strapping
*BS EN13394:2001  Packaging Specification for non-metallic strapping


((packaging))
[[Category:Packaging materials]]

Pages transcluded onto the current version of this page (help):

Strapping (edit)
Template:About (view source) (template editor protected)
Template:Ambox (view source) (template editor protected)
Template:Catalog lookup link (view source) (template editor protected)
Template:Category-inline (view source) (template editor protected)
Template:Category handler (view source) (protected)
Template:Citation (view source) (protected)
Template:Citation/make link (view source) (protected)
Template:Citation/styles.css (view source) (template editor protected)
Template:Citation needed (view source) (protected)
Template:Cite journal (view source) (protected)
Template:Cite patent (view source) (template editor protected)
Template:Cite patent/authors (view source) (extended confirmed protected)
Template:Cite patent/core (view source) (template editor protected)
Template:Clarify (view source) (template editor protected)
Template:Compared to? (edit)
Template:Convert (view source) (template editor protected)
Template:Definition needed (view source) (semi-protected)
Template:Delink (view source) (protected)
Template:Editorializing (view source) (semi-protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Fix (view source) (protected)
Template:Fix-span (view source) (template editor protected)
Template:Fix/category (view source) (protected)
Template:Hlist/styles.css (view source) (protected)
Template:ISBN (view source) (template editor protected)
Template:Icon (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Multiple Issues (edit)
Template:Multiple issues (view source) (template editor protected)
Template:Multiple issues/styles.css (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:Not a typo (view source) (template editor protected)
Template:Packaging (edit)
Template:Pagetype (view source) (protected)
Template:Promotion-inline (edit)
Template:Promotion inline (edit)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Sic (view source) (template editor protected)
Template:Technical (view source) (template editor protected)
Template:Vague (view source) (extended confirmed protected)
Template:Which (view source) (template editor protected)
Template:Yesno (view source) (protected)
Template:Yesno-no (view source) (template editor protected)
Template:Yesno-yes (view source) (template editor protected)
Module:About (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Catalog lookup link (view source) (template editor protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Check isxn (view source) (template editor protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Convert (view source) (template editor protected)
Module:Convert/data (view source) (template editor protected)
Module:Convert/text (view source) (template editor protected)
Module:DecodeEncode (view source) (template editor protected)
Module:Delink (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Format link (view source) (template editor protected)
Module:Hatnote (view source) (template editor protected)
Module:Hatnote/styles.css (view source) (template editor protected)
Module:Hatnote list (view source) (template editor protected)
Module:Icon (view source) (template editor protected)
Module:Icon/data (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Strapping.

Retrieved from "https://en.wikipedia.org/wiki/Strapping"